REPAIR REPLACEMENT OF STREET LIGHTS CABLES POLE BOXES PANELS TIMERS AND ALLIED WORKS AT SOMNATH ENCLAVE 108 ER 17 SIKH ETC AND REPAIR MAINTENANCE OF CEILING EXHAUST FANS AND OTHER CONNECTED WORKS UNDER AGE EM OF GE SUKNA

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc, and including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).

All as per Sl item No. 5 above but fixing only. Note:- Serviceable quantity obtained from dismantling shall be reused under this item.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire including dismantling complete all as specified and directed.

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed.

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 95 sqmm x 3.5 Core, laid in trenches / duct / on pole and including taking down complete all as specified and directed. Make :- Havells / KEI / Polycab / Finolex / Gloster cables Ltd / Asian Cable / RR Kabel Ltd.

S&F PVC insulated 3 core multistranded sheathed cable with 2.5 Sqmm copper conductor for connection of street / security light etc, and including taking down complete all as specified and directed. Make:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing, light grade with necessary fittings fixed along electric pole etc, for cable protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Prakash

S&F 40 mm bore galvanised steel water tubing, medium grade with necessary fittings, laid under road crossing or fixed along electric pole etc, for cable / earth lead protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Prakash

Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 40 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed. Note:- GI Pipe shall be measured and paid separately.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete and including demolition complete all as specified and directed.

S&F cable junction box of size not less than 167 mm (w) x 125 mm (h) x 82 mm (d) with terminals, weatherproof (protected against UV due to solar radiation, rainwater, temperature resistant, impact resistant, etc,) IP 66, with internally embedded gasket (PUR), cover and pre-moulded knockout all sides, fixing arrangement with MS flat of size 40 x 4 mm, necessary nuts, bolt and wahsers and including taking down complete all as specified and directed. Make :- Hensel, Model- KF 5105 or equivalent in Sintex Industries Ltd. / C&S electric Ltd.

S&F 1 x 10 watt LED bollard light fitting, IP-65, including 1 metre hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting & taking down complete all as specified and directed. Make:- Havells Model - MOUNTBL10WLED857PSYMTOPMMAM (1.0 M) or equivalent in HPL / Eveready Industries India Ltd. / Bajaj / Philips / Wipro / Crompton / C&S / Jaquar & Co. Pvt. Ltd. / Syska / Surya

All as per Sl. item No. 24 above but 1 x 8 watt Make:- Havells Model - CONENXGBLS8WLED857PSYMTOPCM (1.0 M) or equivalent in HPL / Eveready Industries India Ltd. / Bajaj / Philips / Wipro / Crompton / C&S / Jaquar & Co. Pvt. Ltd. / Syska / Surya

S&F 1 x 15 watt LED post top lantern, IP-65, die cast aluminium housing, opal diffuser, electronic driver fixing arrangement etc., including electrically connecting & taking down complete all as specified and directed. Make:- Havells Model - CORALMINIPT15WLED757PSYMTOPC or equivalent in Crompton / HPL / Eveready Industries India Ltd. / Bajaj / Philips / Wipro / Surya / C&S / Jaquar & Co. Pvt. Ltd. / Syska

S&F LED street light fitting 1 x 60 watt, IP-65 (minimum), integrated type with high efficiency electronic driver, pressure die cast aluminium housing & lens embedded PC cover, internally prewired and including electricially connecting & taking down complete all as specified and directed. Make:- Havells, Model - ENDURAPEARLNEOSL60WLED757PASYTOPC or Crompton Model - LST-60-CDL-M or equivalent in HPL / Eveready Industries India Ltd. / Bajaj / Philips / Wipro / Surya / C&S / Jaquar & Company Pvt. Ltd. / Syska

M & L sub main wiring with 2 runs of 4 Sqmm main wire alongwith 1 run of 4 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc.,and including taking down complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length. Make of cable :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC casing caping:- Presto Plast / Finolex / Kalinga / Payal

S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting & taking down complete all as specified and directed. Make:- Surya, Model - SLE BT 20 IL or equivalent in Crompton / HPL / Eveready Industries India Ltd. / Bajaj / Philips / Havells / Wipro / C&S / Jaquar & Co. Pvt. Ltd. / Syska

All as per item No. 29 above but 1 x 9 / 10 watt. Make:- Surya, Model - SLE BT 10 or equivalent in Crompton / HPL / Eveready Industries India Ltd. / Bajaj / Philips / Havells / Wipro / C&S / Jaquar & Co. Pvt. Ltd. / Syska

S&F 10 watt LED Bulk head fitting, Poly carbonate housing with diffuser including electrically connecting and taking down complete all as specified and directed. Make:- Surya, Model - SLE BH 10W or equivalent in Crompton / HPL / Bajaj / Philips / Havells / Wipro / C&S / Eveready Industries India Ltd. / Jaquar & Co. Pvt. Ltd. / Syska

S&F 1 x 15 watt, LED down light fitting, 6000 K, round shape, PDC aluminium housing, suitable for recess mounting, integrated type, with high efficiency opal diffuser & integrated electronic driver etc., all electrical accessories pre-wired upto terminal block including electrically connecting & taking down complete all as specified & directed. Make :- Surya, Model - SLE DLR 15W XX Stellar RD or equivalent in Crompton / HPL / Eveready Industries India Ltd. / Bajaj / Philips / Havells / Wipro / C&S / Jaquar & Co. Pvt. Ltd. / Syska / Surya

All as per item No. 32 above but suitable for surface mounting. Make:- Surya, Model - SLE DLS 15W XX Stellar RD or equivalent in Crompton / HPL / Eveready Industries India Ltd. / Bajaj / Philips / Havells / Wipro / C&S / Jaquar & Co. Pvt. Ltd. / Syska / Surya

S&F VTPN DB, 4 way, IP-43, IK 09, double door type with metal door, 250 A copper bus bar for fixing MCCB including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F MCCB 4 pole 125 Amps breaking capacity 16 KA, Ics = 100% Icu complete all as specified and directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with acrylic door, 100A copper bus bar for fixing MCB and including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

All as per item No. 36 above but 12 way.

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F MCB SPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F stepped type electronic fan regulator, with 5 step, AC 50 Hz 230/240 Volts grade including taking down complete all as specified and directed. Make :- Havells / Anchor / Legrand

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Taking down & dismantling ceiling fan of 1200 mm sweep & re-winding of stator with super enamelled copper winding wire of existing guage, supply & replacement of ball bearing and insulating material, including heat varnishing, greasing, lubricating, re-assembling, and spray painting complete fan with approved colour, re-fixing the same and making electrical connection with three core PVC insulated unsheathed flexible cord of 1 Sqmm copper conductor complete all as specified and directed. Note :- Supply of Ball bearing of suitable size, lubricants etc, is deemed to be included in quoted rate. Make of bearing :- Tata / SKF / NBC or its equivalent Make of paint :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

All as per item No. 42 above but 1400 mm sweep.

Taking down & dismantling exhaust fan of 250 to 300 mm sweep & re-winding of stator with super enamelled copper winding wire of existing guage, supply & replacement of ball bearing and insulating material, including heat varnishing, greasing, lubricating, re-assembling, and spray painting complete fan with approved colour, re-fixing the same and making electrical connection with three core PVC insulated unsheathed flexible cord of 1 Sqmm copper conductor complete all as specified and directed. Note :- Supply of Ball bearing of suitable size, lubricants etc, is deemed to be included in quoted rate. Make of bearing :- Tata / SKF / NBC or its equivalent Make of paint :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

All as per item No. 44 above but 380 to 450 mm sweep.

S&F fan capacitor 2.50 mfd, electrolytic type suitable for ceiling fan including taking down complete all as specified and directed.

S&F mild steel down rod 1/2” dia (minimum) & 300 mm length including hanging clamp with nut, bolt and rubber suitable for ceiling fan of 1200 / 1400 mm sweep including taking down complete all as specified and as directed.

S&F steel work for hanging ceiling fans, conforming to IS 1161- 1979 grade St.-240 and including necessary fixing arrangements including taking down complete all as specified and directed.

GLORIOUS CONSTRUCTION

M/s TALCO

KARMIBRINDA

R N SAH N CO

R K UDYOG

MS ORIENT ENGINEERING WORKS

M/S TANDRA DEY.

Jagatbandhu Enterprises

M/S A C PAUL