MAINT, REPAIR AND REPLACEMENT OF OTM BLDG AND MD ACCN INTERNAL WIRING WITH ASSOCIATED WORKS AT PHASE-III DAHUNG AREA UNDER GE 859 EWS

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.

Material and Labour for Point wiring with 1.50 sq mm (nominal area), two single core PVC insulated unsheathed , 1100 volts grade, multi-stranded copper conductor FRLS Grade, in and including PVC casing capping with accessories with teak wood boxes and 3 mm thick plastic laminated sheet top cover size with all fittings and accessories including MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer for housing/mounting brackets switches,sockets etc, including PVC insulated unsheathed single core multi-stranded copper conductor FRLS Grade cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light/point controlled by one way switch complete all as specified and directed.

All as per item No 2 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed

All as per item No 2 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board complete all as specified and directed

All as per item No 2 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed..

S&F switch socket combination multipurpose 15/16 A flush type, 2 in 1 , 3 pin, 240 volts complete all as specified and directed.

S&F switch socket combination multipurpose 5 A flush type, 2 in 1 , 3 pin, 240 volts complete all as specified and directed.

S&F switch piano flush type SP, one way, 5 Amp , 240 Volts complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.

Supply and fix lamp holder, insulated body, with back plate for suitable for batten fittings including taking down old unsv one complete all as specified and directed.

S&F bell push piano type one way 5/6 Amp, 240 Volt including taking down old unsv one complete all as specified and directed.

S&F bell electric AC 240 V, 50 Hz including taking down old unsv one complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated with stranded aluminium conductor of size 16 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

S&F regel batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED Tubelight 20W (single side connection) Ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holders to give glare free light with integrated electronic driver incl taking down old unsv one complete all as directed by Engr in Charge. Cat No. IGP161LT-8-16 & LTT8-20 of Make C&G or equivalent model of Make Bajaj/ Phillips/Havells/Eveready.

Supply and fix in repair sheet metal enclosures for DBs (Double door type) when MCB SPN 4 way with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix in repair sheet metal enclosures for DBs (Double door type) when MCB SPN 8 way with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix in repair sheet metal enclosures for DBs vertical type TPN 6 way (Double door type) suitable for incorporating MCB as outgoing and MCCB as incoming incl connecting incoming and outgoing cables complete all as specified and directed.

Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed.

S&F MCB SP&N , 35 to 60 Amps, 240 volts, 'C' series, complete all as specified and directed.

Supply and laying sub main wiring two single core 6.00 sq mm stranded copper conductor of red & Black colour including 6.00 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing and caping of suitable size for accomadating the wires including taking down existing submain wiring complete all as specified and directed. Note : Two runs of 6.00 sq mm copper conductor wire, One run of 6.00 sq mm earth continuity conductor and one run of PVC casing and capping shall be measured as a unit.

Supply and laying sub main wiring two single core 4.00 sq mm stranded copper conductor of red & Black colour including 4.00 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing and caping of suitable size for accomadating the wires including taking down existing submain wiring complete all as specified and directed. Note : Two runs of 4.00 sq mm copper conductor wire, One run of 4.00 sq mm earth continuity conductor and one run of PVC casing and capping shall be measured as a unit.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated with stranded aluminium conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion including taking down existing earthing plate complete all as specified and directed.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulkhead 10 W including connecting up to ceiling rose with 0.5 sqmm two core flexible cables including taking down old unsv one complete all as specified and directed. Cat No. LBHP-10-CDL of Make C&G or equivalent model of Makes specified in PS here-in-after.

S&F LED luminaire 600mm x 600mm, 35/36 W, 220 V, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver with three core of flexible copper conductor cable of suitable size including taking down old unsv one complete all as specified and directed.

S&F Downlighter round 15W VENUSNEOHE2X2PLR18-42WLED830MOD & Driver (LEDDRIVER36V36WS) incl integrated electronic driver including taking down old unsv one complete all as specified and directed.

S&F LED lamp 9 watt, CDL, B-22 cap, (Pin type), 230 V, PF not less than 0.85 (min) incl taking down old unsv one complete all as specified and directed.

S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230 V, PF not less than 0.85 (min) incl taking down old unsv one complete all as specified and directed.

S&F MCCB 100 Amps, Four pole, 16 KA, 415 Volt including taking down old unsv one complete all as specified and directed.

S&F PVC insulated PVC sheated copper flexible wire multistranded 4 sqmm, 3 core, ISI marked complete all as specified and directed.

Supplying & Fixing of thermostat suitable for 25 to 50 litres capacity of geyser complete all as specified and directed. MAKE : BAJAJ, RECOLD, SPHERHOT

S&F fusible plug ISI marked suitable for 25 to 50 litres capacity of geyser complete all as specified and directed.

S&F heating element ISI marked round/ triangular base, push type, or thread type including rubber washers for 1.5/2.0 KW suitable for 25 to 50 litres capacity of geyser complete all as specified and directed.

S&F inner water container ISI Marked made of stainless steel, vertical or horizontal type suitable for 25 litres capacity of geyser complete all as specified and directed.

S&F outer body container ISI Marked, vertical or horizontal type suitable for 25 litres capacity of geyser complete all as specified and directed.

S&F inner water container ISI Marked made of stainless steel, vertical or horizontal type suitable for 50 litres capacity of geyser complete all as specified and directed.

S&F outer body container ISI Marked, vertical or horizontal type suitable for 50 litres capacity of geyser complete all as specified and directed.

S&F apparatus plate ISI marked suitable for vertical/horizontal type Geyser 25 to 50 ltr capacity complete all as specified and directed.

S&F heavy duty PVC connections pipe with brass hexagonal adoptersat both side 15mm dia and 45 mm long for hot/cold water.

M&L for rewinding of exhaust fan 250/300 mm sweep after dismantling complete motor assay, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/ turn of super enamelled copper wire, heating, varnishing, replacement of unsv bearings/ bushings, blades and testing complete. Note : Contactor will collect fans from complaint cells of specified area and bring back to complaint cell after repair.

Supply only ball bearing of size 6201/6202/6203 suitable for exhaust fan 250/300 mm sweep as per manufacture instruction complete all as specified and directed.

Supply only fan condensor cap 1/1.8 MFD suitable for exhaust fans 250/300mm sweep.

Supply only louvers suitable for exhaust fans 250/300mm sweep.

S&F exhaust fan motor suitable for exhaust fans 250/300 mm sweep.

M/S R N ENTERPRISES

M/S ARUNACHAL GENERAL PROVISION STORE

M/S RARAI ENTERPRISES

Sikha Traders

M/S YOGENDRA CONSTRUCTION CO