Construction of Electric Crematorium at Nanjangudu CMC and Gauribidanur CMC under UIDF scheme

Construction of Electric Crematorium at Nanjangudu CMC under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand), (PWD SR 2023-24, Volume 2, Item no.5.4, Pg no.9)

Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, ...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction., (PWD SR 2023-24,...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportat...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and s...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...

Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s ...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directio...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cle...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactur...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requir...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS: 13592 Type A, including jointing wth seal ring confirming to IS : 5382, leabving 10 mm gap for thermal expa...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directio...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS: 13592 Type A, including jointing wth seal ring confirming to IS : 5382, leabving 10 mm gap for thermal expa...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disp...

Cutting of Trees, excluding removal of stumps and roots of trees. Girth from 600 mm to 900 mm, (PWD SR 2023-24, Volume 3, Item no.2.1-a-ii, Pg no.9)

Removal of stumps and roots including backfilling with suitable material to required compaction. Girth from 600 mm to 900 mm, (PWD SR 2023-24, Volume 3, Item no.2.1-b-ii, Pg no.9)

Construction of unlined surface drains of average crosssectional area 0.40 Sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materi...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/Sqm using mechanic...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/Sqmon the prepared bituminous surface cleaned with mechanical broom, (PWD SR 20...

Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported t...

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...

Providing and laying of Road marking with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/Sqm area, thickness of 2.5 mm is exclusive of surface applied gla...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Painting Two Coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, (PWD SR 2023-24, Volume 3, Item ...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Conveying the new CI or RCC machinehole frame and cover of 2 CMTS from divisional stores to the workspot and fixing the same in cement concrete and removing the old frame and cover and conveying back ...

Providing and fixing PTMT grating of approved quality and colour. (PWD SR 2023-24 , Vol-V, Pg-120, Item Code-13.22.1.2)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. (PWD SR 2023-24 , Vol-V, Pg-201,...

Providing and fixing brass bib cock of approved quality : (20 mm nominal bore) (PWD SR 2023-24 , Vol-II, Pg-117, Sl- 13.2.2)

Providing and fixing brass stop cock of approved quality : : (20 mm nominal bore) (PWD SR 2023-24 , Vol-II, Pg-117, Sl- 13.3.2)

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments. 25mm dia PVC couplers (PWD SR 2022...

Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments. 90mm dia PVC couplers (PWD SR 2022...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. 25 mm dia PVC Elbows (PWD SR 2022-24 , V...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. 90 mm dia PVC Elbows (PWD SR 2022-24 , V...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments . 25 mm dia PVC Tee (PWD SR 2022-24 , Vol-V,...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments . 90 mm dia PVC Tee (PWD SR 2022-24 , Vol-V,...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing (Rectangular...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. (PWD SR 2021-22 , Vol-II, P-121, Sl-...

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and...

Supply and delivery of Centrifugal pump set at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments (PWD SR 2023-24 , Vol-V, Pg-157, Sl- 13.40.3)

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 25 mm, (PWD SR ...

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mm, (PWD SR 202...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch, (PWD SR 2023-24, Vol-6, 3.5.8, Page No: 08)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket, (PWD SR 2023-24, Vol-6, 3.6.1, Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module, (PWD SR 2023-24, Vol-6, 3.6.3, Page No: 09...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch, (PWD SR 2023-24, Vol-6, 3.6.4, Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push, (PWD SR 2023-24, Vol-6, 3.6.7, Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch, (PWD SR 2023-24, Vol-6, 3.6.8, Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket, (PWD SR 2023-24, Vol-6, 3.6.9,Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket, (PWD SR 2023-24, Vol-6, 3.6.10,Page No: 09)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6, (PWD SR 2023-24, Vol-6, 3.6.11,Page No: 09)

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80 mm, (PWD SR 2023-...

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm, (PWD SR 2023...

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell, (PWD SR 2023-...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with ...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with ...

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE star rated and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 4...

Supplying wall mounting fan suitable to operate at single phase 230v AC. supply. 300 mm Sweep, (PWD SR 2023-24, Vol-6, 6.4.1, Page No: 30)

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of a...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

Extra length of GI pipe of class B 19mm dia for down rod., (PWD SR 2023-24, Vol-6, 13.11,Page No: 57)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm), (PWD SR 2023-24, Vol-6, 13.12,Page No: 57)

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per W, lifegreate...

Supplying & Fixing of 70-150 W lamp holder 2 Pin, (PWD SR 2023-24, Vol-6, 11.11.4,Page No: 47)

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / w...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires, (PWD SR 2023-24, Vol-6, 13.1.1,Page...

Fabricating, supplying and erection of ... ms long hot dip

Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Stand...

Automatic Switch for Street Light, (PWD SR 2023-24, Vol-6, 4.6.2, Page No: 13)

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair, (PWD SR 2023-24, Vol-6, 68.16,Page No: 32)

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair, (PWD SR 2023-24, Vol-6, 8.2.2,Page No: 36

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm GI strip, (PWD SR 2023-24, Vol-6, 12.57, Page No: 54)

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm Copper strip, (PWD SR 2023-24, Vol-6, 12.58.3,Page No: 54)

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 600 x 600 x 3 mm Copper plate, (PWD SR 2023-24, Vol-6, 12.58.8, Page No: 55)

RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as

per IS-785, (PWD SR 2023-24, Vol-6, 12.58.11, Page No: 55)

PSCC Pole - 8 Mtr Long, 140 Kg WL

(Dwg No. BESCOM/GM/QS&S/17 Dtd 24.11.2018) as

per REC Standards, (PWD SR 2023-24, Vol-6, 1.01,Page No: 03)

kV-11 , Special 3 Pin Cross Arm - GI, (PWD SR 2023-24, Vol-6, 1.04, Page No: 03)

HT ST Support 50x8 mm Flat - GI, (PWD SR 2023-24, Vol-6, 2.04, Page No: 03)

Spiral Earth Electrode , (PWD SR 2023-24, Vol-6, 2.12,Page No: 04)

Anticlimbing Device GI Barbed wire (12 Mtr/Kg), (PWD SR 2023-24, Vol-6, 2.16, Page No: 04)

Guarding for Road crossing, Telephone Line Crossing,

between HT & LT Line Crossing, (PWD SR 2023-24, Vol-6, 4.02, Page No: 04)

LT 4 Pin Cross Arm - GI , (PWD SR 2023-24, Vol-6, 4.03,Page No: 04)

No. 8 Strain Insulator, (PWD SR 2023-24, Vol-6, 2.06,Page No: 04)

RCC Pole Clamp - GI, (PWD SR 2023-24, Vol-6, 6.07,Page No: 05)

Guy Clamp - GI, (PWD SR 2023-24, Vol-6, 5.02,Page No: 04)

GI Pin 11 kV for 11 kV Ceramic Shell Insulator, (PWD SR 2023-24, Vol-6, 5.10,Page No: 05)

DISC Insulator 45 kN Porcelain, (PWD SR 2023-24, Vol-6, 6.02,Page No: 05)

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM, (PWD SR 2023-24, Vol-6, 6.09,Page No: 05)

SWG Guy Wire -7/10

(7/3.251 mm Dia), Std Wt: 680 Kg/KM, (PWD SR 2023-24, Vol-6, 7.02,Page No: 05)

PG Clamp Rabbit to Rabbit, (PWD SR 2023-24, Vol-6, 8.01,Page No: 05)

kV-9, 5 kA Lightning Arrester Metal Oxide Ceramic type

with GROUND DISCONNECTOR

(Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007), (PWD SR 2023-24, Vol-6, 9.02,Page No: 06)

kV-11, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018), (PWD SR 2023-24, Vol-6, 19.01,Page No: 09)

For 100/300 kVA 4/5 Star Rated Transformer on

RCC Pole - 9 Mtr Long, 145 Kg WL - GI , (PWD SR 2023-24, Vol-6, 20.01,Page No: 09)

Three H Frame with Transformer Seating and Seating

angle support cross arm for 11 Mtr Spun Pole up to and

including 250 kVA (UG Cable)) - GI, (PWD SR 2023-24, Vol-6, 21.08,Page No: 10)

kV-11, 200 Amps Single Break GOS

(Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018), (PWD SR 2023-24, Vol-6, 22.04,Page No: 10)

kV-11 , DOLO Cutout Conventional to Erstwhile KEB

Specification, (PWD SR 2023-24, Vol-6, 24.01,Page No: 11)

Transparent Alkathine tube 19 mm dia, 2 mm thick in

coils of 30 Mtr, (PWD SR 2023-24, Vol-6, 25.01, Page No: 12)

Caution/Danger Board, (PWD SR 2023-24, Vol-6, 52.01,Page No: 20)

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved

Drawing. Hard Soil, (PWD SR 2023-24, Vol-6, 68.17,Page No: 32)

Digging of Pit for GUY SET Hard Soil, (PWD SR 2023-24, Vol-6, 1.1.2,Page No: 43)

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth, (PWD SR 2023-24, Vol-6, 1.7.2,Page No: 44)

Providing Spiral Earth Electrode type earthing (without

charcoal, salt etc.,), (PWD SR 2023-24, Vol-6, 2.02,PAGE NO.44)

For Three H Frame without Transformer Seating and

Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable) (excluding erection of Pole), (PWD SR 2023-24, Vol-6, 2.0...

Fixing of 4 Pin cross arm with Insulator and Braces fixing, (PWD SR 2023-24, Vol-6, 4.04, Page No: 45)

Fixing of HT/LT Single Top Support, (PWD SR 2023-24, Vol-6, 5.02, Page No: 45)

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT, (PWD S...

Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc /strain insulator by means of clamps., (PWD SR 2023-24, Vol-6, 5.10, Page No: 45)

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring, (PWD SR 2023-24, Vol-6, 6.02, Page No: 46)

Fixing of GOS including wiring (11 kV Single Break 200

Amps) , (PWD SR 2023-24, Vol-6, 13.01, Page No: 48)

Numbering and Scheduling of Pole, (PWD SR 2023-24, Vol-6, 13.02, Page No: 48)

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYP 250 kVA, Aluminium Wdg, Star 1 (4 Star), (PWD SR 2023-24, Vol-6, 15.08,Pag...

LT Distribution Box for 100/250 kVA DTC with MCCB's

(SMC) , (PWD SR 2023-24, Vol-6, 12.17,Page No: 07)

three Phase CT/PT operated alternating current Smart

Meter of Accuracy Class 0.2s DLMS with GPRS

Communication Module, (PWD SR 2023-24, Vol-6, 18.03,Page No: 09)

kV-11 HT Metering cubicle of different CT Ratio, Both

side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar,

Modem & 2 No of Meters for 3 Phase 4 Wire Meter...

Erection of 200 - 250 kVA Transformer, (PWD SR 2023-24, Vol-6, 58.01,Page No: 26)

Erection of HT metering Cubicle on Platform, (PWD SR 2023-24, Vol-6, 8.03,Page No: 46)

kV-11, 3 Core, xPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia),...

Heat Shrinkable Indoor Type Cable Termination Kit

for xLPE Cable 3x95 Sqmm, (PWD SR 2023-24, Vol-6, 36.01,Page No: 15)

Heat Shrinkable Outdoor Type Cable Termination

Kit for xLPE Cable 3x95 Sqmm, (PWD SR 2023-24, Vol-6, 45.04,Page No: 20)

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm, (PWD SR 2023-24, Vol-6, 45.07,Page N...

Heat resistant PVC insulated or 1.1 kV, xLPE , PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 185 Sqm...

Heat resistant PVC insulated or 1.1 kV, xLPE, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 120 Sqmm...

Heat resistant PVC insulated or 1.1 kV, xLPE, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, ...

Heat resistant PVC insulated or 1.1 kV, xLPE, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, ...

Heavy Duty Copper Terminal Long Barrel

25 Sqmm Copper Terminal, Apprx Wt: 11 Gm, (PWD SR 2023-24, Vol-6, 32.11,Page No: 13)

Heavy Duty Copper Terminal Long Barrel

50 Sqmm Copper Terminal, Apprx Wt: 26 Gm, (PWD SR 2023-24, Vol-6, 59.01,Page No: 26)

Heavy Duty Copper Terminal Long Barrel

95 Sqmm Copper Terminal, Apprx Wt: 58 Gm, (PWD SR 2023-24, Vol-6, 59.03,Page No: 26)

Heavy Duty Copper Terminal Long Barrel

120 Sqmm Copper Terminal, Apprx Wt: 64 Gm, (PWD SR 2023-24, Vol-6, 59.05,Page No: 26)

Heavy Duty Copper Terminal Long Barrel

185 Sqmm Copper Terminal, Apprx Wt: 158 Gm, (PWD SR 2023-24, Vol-6, 59.06,Page No: 26)

Brass Cable Gland 25, (PWD SR 2023-24, Vol-6, 59.08,Page No: 26)

Brass Cable Gland 32, (PWD SR 2023-24, Vol-6, 63.01,Page No: 28)

Brass Cable Gland 40, (PWD SR 2023-24, Vol-6, 63.02,Page No: 28)

Route & Joint indicating slab with MS Anchor rod , (PWD SR 2023-24, Vol-6, 63.03,Page No: 28)

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm, (PWD SR 2023-24, Vol-6, 68.08,Page No:...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm, (PWD SR 2023-24, Vol-6, 21.05,Page No: ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm, (PWD SR 2023-24, Vol-6, 21.06,Page No...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. , (PWD SR 2023-24, Vol-6, 5.42.1,Page No: 20)

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired., (PWD ...

Supplying and fixing of Shunt trip suitable for MCCB.CBCT, (PWD SR 2023-24, Vol-6, 5.31,Page No: 19)

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C, (PWD SR 2023-24, Vol-6, 5.21, Page No: 18)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Rotary handle for MCCB, (PWD SR 2023-24, Vol-6, 5.15.09, Page No: 17)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplyingofonloadchangeoverswitches4poles,AC-23ADuty,415V,50Hz,ACSupply.Withallaccessories.(SMEnclosureSheet Metal Execution) 100 A, (PWD SR 2023-24, Vol-6, 5.18.9, Page No: 17)

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 2 pole , (PWD SR 2023-24, Vol-6, 5.19.9, Page No: 18)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole, (PWD SR 2023-24, Vol-6, 5.19.11, Page No: 18)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supply ,installation ,testing,&commissioning of Main Furnace:supply of fabricated main frame for houseing refractory bricks and other equipment,Furnace the main door,furnace supporting frame,main door...

Supply, Installation, Testing, & Commissioning of refractory items such as ceramic fiber blankets, insulation bricks, Hot Zone bricks (IS8), Cold Zone bricks (IS6), body resting bricks, arch- supporti...

Supply, Installation, Testing, & Commissioning of vertical Heating coil

Power of 42 KW. Heating coils are made out of 8 swg Kanthal APM wire / Nichrome 80/20 wire of 8 Gauge with terminal rods. Ver...

Supply, Installation, Testing, & Commissioning of Body Charging Trolley

Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipelines and control desk to o...

Supply, Installation, Testing, & Commissioning of Electric Remote Control panel.

The control panel is built with the following components housed in Panel made out of M S sheet duly powder coated, with...

Supply, Laying, Testing, & Commissioning of Control & Power Cables

Supply of power cables, bus bar laying, supporting tray, conduit pipes, from the control panel to various equipments, heating coils, ...

Supply, Installation, Testing, & Commissioning of Water pump

Supply of water pump for scrubber unit.

1 Hp motor, 3 Phase, 415V, for circulating the water in wet venture scrubber unit and necessary pip...

Supply,Installation,Testing,& Commissioing of Fresh air blower

Made out of M S Sheet, direct driven motor of 1 Hp, 3 Phase, 415V, of suitable capacities, mounted on a M S rigid angle fr...

Supply, Installation, Testing, & Commissioning of Scrubber unit Wet scrubber unit with venturi arrangements made out of S S 304G sheets. In unit-1 smoke will completely come in contact with water and ...

Supply, Installation, Testing, & Commissioning of online-Exhaust Blower

Fabricated with an S S 304G sheet, the impeller driving shaft is also made out of S S with bearing support mounted on a suitable...

Erection charges for

Erection, testing, commissioning, handing over the cremation furnace

(a) Fixing of Frame, Main Door, Counterweight, Mechanical and Electrical operating door system.

(b) Refractory...

Supply, Installation, Testing, & Commissioning of Self-supporting chimney.

The chimney is made out of M S Plates, angles, flats, grouting bolts & gusset plates, ladder, platform with a protection cage...

Construction of Electric Crematorium at Gauribidanur CMC under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights in...

Providing and injecting chemical emulsion for Preconstructional AntiTermite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surfa...

Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...

Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar 16 1 cement 6 coarse sand

Providing and laying in position Reinforced cement concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed w...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing ThermoMechanically Treated bars of grade Fe500D or more Steel reinforcement for RCC work including straightening cutting bending placing in position binding and anchoring to adjacent members...

Providing ThermoMechanically Treated bars of grade Fe500D or more Steel reinforcement for RCC work including straightening cutting bending placing in position binding and anchoring to adjacent members...

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming...

Filling approved earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and wateri...

Providing Brick work with common burnt clay Non Modular bricks of class designation 35 in superstructure above plinth level in all shapes and sizes in Cement mortar 16 1 cement 6 coarse sand includin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 35 in superstructure above plinth level in all shapes and sizes in Cement mortar 16 1 cement 6 coarse sand includin...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 1 cement 4 fine sand including rounding off corners wherever required smooth rendering providing and removing sc...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 1 cement 4 fine sand including rounding off corners wherever required smooth rendering providing and removing sc...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 14 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 14 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing ...

Providing skirting dadooing rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed tile...

Providing and laying vitrified floor tiles with thickness 910 mm in different sizes with water absorption less than 008 and conforming to IS 15622 of approved make in all colours and shades laid on 20...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in all colours shades except Wh...

Providing and laying in Cement Concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrap basalt crushed graded coarse aggregates and fine aggregates...

Providing and fixing MS grills of required pattern in frames of windows etc with MS flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows...

Providing fixing of 25 track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and l...

Providing MathiNandi wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side...

Providing and fixing flush door shutter made out of solid core block board type well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...

Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc complete 125x70x4 mm ordinary type

Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws nuts bolts and washers etc complete

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc complete...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI IS 3564 embossed on the body door weight upto 35 kg and door width upto 700 mm wi...

Providing and fixing aluminium tubular handle bar 32 mm outer dia30 mm thick 2100 mm long with SS screws etc complete as per direction of EngineerinCharge Anodized AC 15 aluminium tubular handle bar...

Providing and fixing bright finished brass tower bolts barrel type with necessary screws etc complete 250x10mm

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Applying priming coats with primer of approved brand and manufacture having low VOC Volatile Organic Compound content With water thinnable cement primer on wall surface having VOC content less than 50...

Applying priming coats with primer of approved brand and manufacture having low VOC Volatile Organic Compound content With water thinnable cement primer on wall surface having VOC content less than 50...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoro...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoro...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two coats applied 143 ltr10 m² over and including priming coat of exterior primer applie...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two coats applied 143 ltr10 m² over and including priming coat of exterior primer applie...

Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied 090L10 m² over an under coat of primer applied 075 L10 m² of approved brand and manufacture to give an even sha...

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component cold applied water based acrylic PU dispersion with highly elastic and UV resistant water proofing...

Supplying and fixing rolling shutters of approved make made of required size MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially...

Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 1680 m² in area including cost of materials labour usage charges of machinery complete as per ...

Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel...

Providing fixing corrugated GS sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpe...

Providing fixing ridges or hips of width 60 cm overall width plain GS sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia GI limpet and bitumen washers complete as per design drawing...

Providing and fixing 15 cm wide 45 cm overall semicircular plain GS sheet gutter with iron brackets 40x3mm size bolts nuts and washers etc including making necessary connections with rain water pipes ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of approv...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid 10 litre low level white vitreous china flushing cistern CP flush bend with fittings CI brackets ...

Providing and fixing wash basin with CI brackets 15 mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls where...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing solid plastic seat with lid for pedestal type WC pan complete White solid plastic seat with lid

Providing and fixing 100 mm sand cast Iron grating for gully trap

Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete

Providing and fixing brass stop cock of approved quality 20 mm nominal bore

Providing and fixing Brass full way valve gate with CI wheel of approved quality screwed end 25 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings ic fixing the pipe with clamps at ...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings ic fixing the pipe with clamps at ...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings ic fixing the pipe with clamps at ...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal sibility for hot cold water supply including all CPVC plain brass threaded fittings This includes jointing of pipes fi...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal sibility for hot cold water supply including all CPVC plain brass threaded fittings This includes jointing of pipes fi...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal sibility for hot cold water supply including all CPVC plain brass threaded fittings This includes jointing of pipes fi...

Providing and placing on terrace at all floor levels polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and ove...

Providing and fixing squaremouth SW gully trap class SP1 complete with Cl grating brick masonry chamber l00mm x l00mm size P type with Non Modular common burnt clay bricks of designation 3S water ti...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expan...

Providing supplying to work siteSingle Phase Submersible Pump Sets of 100mm dia 4 inch suitable for bore well confirming to IS 80342000 specificationswith testing of as per instructions of engineer in...

Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes for cold water supply including all uPVC plain brass threaded fittings This includes jointing of pipes fittings with one step uPVC so...

Constructing brick masonry chamber for underground CI inspection chamber and bends with bricks in cement mortar 14 1 cement 4 coarse sand CI cover with frame light duty 600X850 mm internal dimensions...

Providing and fixing PVC SWR Nahani Trap 10cms x 10cms with all fitting arrangements all necessary accessories complete

Earth work in surface excavation by mechanical means for lowering leveling the ground for all works other than foundation in all kinds of soils upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Reinforced cement concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed w...

Water proofing systems Retaining wall Inside oHT UG sump Tanks

Providing Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall Underground tank The material having chemi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma...

Providing 12 mm cement plaster with cement mortar 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materia...

Providing Flush Ruled pointing Pointing on stone work with cement mortar 13 1 cement 3 fine sand after raking joints to depth nicely lining including cost of materials labour curing as per specificat...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgm3 and minimum compressive strength of 400 Nmm2 conforming to IS 2185...

Providing and fixing Steel work welded in built up sections framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as...

Providing and laying in position Reinforced cement concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed w...

Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works other parallel works from 050m to 350 m h...

Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terraceChajjasSunken portion of WCBathroom cold applied PU w...

Construction of subgrade and earthen shoulders with approved material CBR min 10 obtained from borrow pits with all lifts leads transporting to site spreading grading to require...

Providing laying spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...

Providing and laying 60mm thick factory made precast M 30 grade Cement Concrete Paver Block as per IRC SP 632018 IS 15658 for Cycle Tracks Pedestrian Footpaths of approved shape and colour laid in r...

Providing and laying 80mm thick factory made precast M 30grade Cement Concrete Paver Block as per IRC SP 632018 IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA for Residential Stree...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway Sidewalls and gutters fixed with CM 13 fixed and finsihed in line as per direction of Engineer in charge The cost of PCC ...

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bin...

Providing and laying in position Cement Concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super p...

Providing and laying in position Cement Concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super p...

Providing and laying 100mm thick precast cover slabs over Road side drains utility ducts Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 ...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or PWSS by vertical electrical sounding by adopting Venner or Sc...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap ...

Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 42702001 and latest ammendments electrical resistance welded steel tubes mater...

Providing and fixing MS casing collars as per IS 1239 partII 1982 with all latest amendments if any for any dia The thickness of plate used for covering one end shall be 3mm minimum The dimensions of ...

Providing and laying at site of work MS casing caps as per IS 1239 part II 1982 with all latest amendments if any for any dia The thickness of plate used for covering one end shall be 3mm minimum The ...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 803420003Phase SS Bowl Impeller with Low volt Motor as per specifications to work site as per necessary ammendm...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty C Class as per IS 1239 PartI 1990 with latest amendments with ISI Mark one end fitted with Heavy Duty collar and o...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 6941990 with ISI Mark and as per its latest amendments 1x3x4 m2

Supply and delivery at site of brand new best make nonreturn valve as per IS 7781984 with ISI Mark and as per its latest amendmentsSize 50 mm

Providing and fixing GI union in existing GI pipe line cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same comple...

Supply and delivery at site wrought middle steel galvanized GI elbow confirming to IS 1239II 1991 with latest amendments if any forFor 50 mm dia GI elbow

Supply and delivery at site wrought middle steel galvanized GI hexagonal nipple confirming to IS 1239II 1991 with latest amendments if anyFor 50 mm dia GI hexagonal nipple

Providing wrought mild steel galvanized GI collar dia GI collar confirming to IS 1239II 1991 with latest amendments if any For 50 mm dia

Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltm...

Supply and laying insulated cable on messenger wire using 2 single core wire for a single phase and stringing PVC insulated and PVC sheathed 650 1100 V class aluminium conductor of sizes supported by...

Supply and delivery at site best indigenous brand new power capacitor as per IS 28341986 with latest amendments with KPTCL authorities and erection electrification and commissioning of the same at the...

Earthing Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of salt...

Providing and fixing suitable for 11 KV class UG cable filled with necessary bitumeninsulating compound complete with terminals clampsboltsnuts and washers etc with necessary materials and labour tool...

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

Providing 4 Kg Fire Extinguisher Clean Agent HCFC 123 Supply and installation of 2Kg Pressure type Pressure Guage Gross Weight 37Kg empty weight 17 Kg Can Height 344MM Diameter 108MM Discharge Time le...

Providing 6 Kg Fire Extinguisher Clean Agent HCFC 123 Supply and installation of 4Kg Stored Pressure Type Pressure Gauge Gross Weight 69 kg empty weight 29 kg Can Height 440MM Diameter 140 M M Dischar...

Supplying of four bucket stand alongwith buckets Complete

Supplying of Hand gloves Complete

Supplying of first aid box Complete

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kgm3 and minimum compressive strength of 400 Nmm2 conforming to IS 2185...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering providing and removing sc...

Painting on Steel SurfacesProviding and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shade

Supplying and providing 2025mm jelly in the station yard of uniform thickness of 100 mm including the cost of materials labour charges required tools and plants etc complete Work shall be carried out ...

Providing MSand Supplying and filling in plinth foundations UG cable work with approved Msand including watering ramming consolidating and dressing The rate includes the cost of material labour char...

Spiral Earth Electrode Item no 216 Page no 4

Labour charges for Providing Spiral Earth Electrode type earthing without charcoal salt etcItem no 208 Page no 44

11 kV 5 kN CompositePolymeric Pin Insulator 24 mm dia FRP Rod Item no 606 Page no 5

11 kV 400 Amps Double Break GOSItem no 2404 Page no 11

Labour charges for fixing of 11 kV 400 Amps Double Break GOS including wiringItem no 1303 Page no 48

H Frame Set for fixing 11 kV 200 Amps Single Break GOS For DP structure for providing New GOS for sectionalisation GIItem no 2407 Page no 11

Labour charges for Erection of HFrameItem no 209 Page no 44

Insulated GOS Operating RodsItem no 2410 Page no 12

CautionDanger BoardItem no 6817 Page no 32

Labour charges for Fixing Danger BoardItem no 515 Page no 45

10 kV 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTORItem no 1902 Page no 9

Fixing of 3 Nos Lightning Arrestor including wiringItem no 1306 Page no 48

11 kV HG Fuse Unit with Solid Core InsulatorItem no 2001 Page no 9

Labour charges for Fixing HG Fuse unit including fixing of cross arm and wiringItem no 1301 Page no 48

GSM modem with connecting cable for remote communicating capabilitiesItem no 3705 Page no 16

Distribution Transformer 3 Phase 11kV433V Stacked CRGO Core with Oil as per IS1180 Part1 2014 CABLE ENTRY TYPE 250 kVA Aluminium Wdg Star 2 5 StarItem no 1218 Page no 7

Labour charges for Erection of 200 250 kVA TransformerItem no 803 Page no 46

LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification design as per the prototype approval Excluding Meter Cost Modem CostItem no 5802 Page no 26

Labour charges for Erection of LT metering Cubicle on PlatformItem no 902 Page no 47

LT Distribution Box for 250 kVA DTC with MCCBs Sheet MetalItem no 1802 Page no 9

Labour charges for Erection of LT Distribution Box for 250 kVA DTC Excluding wiring Item no 907 Page no 47

Smart Meters IS 16444 Complaint LT AC 3 Phase 4 Wire CT Operated 5 Amps Smart Energy Meter Class 05s Accuracy with GPRS Communication ModuleItem no 5318 Page no 24

For Distribution Transformer Centre DTC MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps with associated LT CT 05 Accuracy Class ring type with wiring Clamps BN and all other accessories require...

Labour charges for Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CTs Meter wiring for DTC 250 kVA TC Item no 1103 Page no 47

Compact RMU VCBSF6 Type with Copper Busbar 350 MVA 630 Amps as per IEC62271IS3427 3 Way RMU 2 OD 1VL One Incomer One Breaker One Outgoing 630 Amps with Copper Busbar Item no 4001 Page no 17

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed assembly of units connecting Bus Bars from panel to panel initial filling of oil etc co...

Lettering the RMU with enamel paint and also writing single line diagram of each panel caution Board Danger Board etc including cost of Paint Brush etcItem no 2307 Page no 53

MS Pipe 200 mm Dia with collarItem no 6805 Page no 32

11 kV Jointing Cable Termination Kit as per IS13573 Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug Al Ferrule 3x240 Sqmm Item no 4517 Page no 21

Labour charges for Heat shrinkable Straight Through Joint for HT UG Cable 3x185 to 3x240 Sqmm Item no 2202 Page no 52

11 kV Cable Termination Kit as per IS13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x240 SqmmItem no 4505 Page no 20

11 kV Cable Termination Kit as per IS13573 Heat Shrinkable Outoor Type Cable Termination Kit for XLPE Cable 3x240 SqmmItem no 4508 Page no 20

Labour charges for Heat shrinkable Type Terminations for HT UG Cable 3x185 to 3x240 SqmmItem no 2205 Page no 52

11 kV Cable Termination Kit as per IS13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 SqmmItem no 4504 Page no 20

Labour charges for Heat shrinkable Type Terminations for HT UG Cable 3x95 to 3x150 SqmmItem no 2204 Page no 52

11 kV 3 Core XPLE HT UG Cable with pressure extruded inner sheeth ROUND WIRE ARMOURED as per IS7098 Part2 Armouring wires dia and Resistivity as per IS3975 95 Sqmm 54 GI Wires 25 mm Dia Item no 3601...

Laying of HT UG cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm Item no 2101 Page no 52

11 kV 3 Core XPLE HT UG Cable with pressure extruded inner sheeth ROUND WIRE ARMOURED as per IS7098 Part2 Armouring wires dia and Resistivity as per IS3975 240 Sqmm 55 GI Wires 315 mm Dia Item no 36...

Laying of HT UG cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 3x185 to 240 Sqmm Item no 2102 Page no 52

11 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LT UG Cable as per IS1554 Part1 or IS7098 Part1 Armouring strip thickness and resistivity as per IS3975 10 Sqmm 4 Core 10...

Laying of LT UG cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 25 to 25 Sqmm Item no 2105 Page no 52

11 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LT UG Cable as per IS1554 Part1 or IS7098 Part1 Armouring strip thickness and resistivity as per IS3975 95 Sqmm 35 Core 2...

Laying of LT UG cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 35 to 95 Sqmm Item no 2106 Page no 52

11 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LT UG Cable as per IS1554 Part1 or IS7098 Part1 Armouring strip thickness and resistivity as per IS3975 185 Sqmm 35 Core ...

Laying of LT UG cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 120 to 240 Sqmm Item no 2107 Page no 52

Aluminium End Terminal Lug 10 Sqmm Item no 6001 Page no 27

Aluminium End Terminal Lug 95 Sqmm Item no 6007 Page no 27

Aluminium End Terminal Lug 185 Sqmm Item no 6010 Page no 27

Brass Cable Gland 25 mm Item no 6301 Page no 28

Brass Cable Gland 45 mm Item no 6304 Page no 28

Optical Fibre Cable OFC and its Accessories HDPEPLB Pipe 4033 mm Item no 6605 Page no 30

Route Joint indicating slab with MS Anchor rod Item no 6808 Page no 32

Labour charges for Fixing of Route Joint Indicating Slab Item no 2702 Page no 56

Acoustic enclosure The acoustic enclosure shall be made of 16 mm thick CRCA sheets in suitable approved shade and a structural sheet metal base frame painted in black The walls of the enclosure are in...

Supply Erection testing and commissioning of AMF panel suitable for 180 KVA DG set The panel is of cubical type basefloor mounting control panel with hinged doors undrilled bottom gland plate aluminiu...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Fixing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps bolts nuts and wiring using suitable capacity wiresItem no 135

Supplying fixing wiring earth electrode for grounding conduits IC cutouts and other equipments on the meter board using 40mm dia 290mm thick GI pipe 25 mtr long buried in a pit The pit should be fille...

Supplying fixing and wiring earth electrode for grounding of lifts transformers DG sets etc using 40mm dia 29mm thick 25 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on th...

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required

25x3mm GI stripItem no 12581

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required

25x3mm Copper stripItem no 12587

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI boltsnuts and washer or welding as required 450x50mmItem no 12593

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

Supplying fixing of Porcelain fuse channel with cut out on existing woodenpanel using necessary nuts bolts and washers

16AmpsItem no 571

Supply and fixing of 4pole power contactor with NONC contacts on existing woodpanel board using necessary bolts nuts washers and wiring etc complete with AC3 Rating and as per IS13947 2225 AmpsItem n...

Supplying and fixing Microprocessor based Electronic timer without contactor Din Mounting using necessary bolts nuts and washers etc 3120sec settingItem no 547

Supplying 100 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolicFRPDMC insulator which ar...

Supplying 250 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolicFRPDMC insulator which ar...

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mmItem...

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 50 x 6 m...

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equipped wit...

Fabricating supplying and erection of 7 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements including...

Supplying and fixing of Hot dip Galvanized MSBracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc complete

Double Arm Bracket with 1000mm Standard 4050...

Open Conduit System Supplying heavy gauge PVC conduit pipe 1920 mm dia 2 mm thick confirming to IS 2509 with suitable size bends junction boxes adhesive paste etc and fixing using inverted wood plugs...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends metalPVC Junction boxes adhesive paste etc and running before conc...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick with suitable size bends metal junction boxes adhesive paste etcby groove cutting in the wall and fixing by braci...

Supplying And Fixing Metal Fan Box with Round HookItem no 113

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x15Sqmm Phase Neutral 1x10 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirmi...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x15Sqmm Phase Neutral 1x10 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirmi...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x15Sqmm Phase Neutral 1x10 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirmi...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS69...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS69...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS69...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS69...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in BrickStoneCC wall 1012W...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way SwitchItem no 361

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps Three way socketItem no 363

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two moduleItem no 364

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way SwitchItem no 367

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 616Amps universal socketItem no 3610

Supplying and fixingreplacing of 61632A electrical accessories on existing switch board 6A Bakelite Ceiling RoseItem no 3145

Supplying and fixingreplacing of 61632A electrical accessories on existing switch board 6A Batten Holder Item no 3147

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit breaking capacity...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit breaking capacity...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCBs single phase 3 phas...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCBs single phase 3 phas...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete 15 Sweep 450mmItem no 622

Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc for operation on 230 volts 50 cycles Single phase AC supply conforming to ISS374 1979 and with double ball beari...

Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose necessary len...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A ceiling rose with sufficient length of 2300076inch PVC insulated twin core wireItem no 1314

Supplying of 4 feet PVC Batten with integrated LED tube 2022W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input 220240V 5060Hz Power factor ...

Supplying of 4 feet PVC Batten with integrated LED tube 3640W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input 220240V 5060Hz Power factor ...

Supplying of recess mounting non integral type LED luminaire comprising of pressure decastextruded aluminium housing with spring loaded false ceiling clamps Power LEDs with CCT 6500 degree K CRI70 eff...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 2300076 twin twisted PVC insulated wires required N...

Supplying fixing and wiring Automatic Power Factor controller circuit unit fully static units controlled by 14 stage microprocessor operation relays LED display self programming function for power sta...

Supplying and fixing Moulded Case Circuit BreakerMCCB over the existing woodpanel board using necessary screws bolts nuts necessary phase separators handle and wiring complete Protection of Overload a...

Supplying and fixing Moulded Case Circuit BreakerMCCB over the existing woodpanel board using necessary screws bolts nuts necessary phase separators handle and wiring complete Protection of Overload a...

Supplying and fixing of Shunt trip suitable for MCCBCBCTItem no 516

Supply and fixing of fully Enclosed Automatic Transfer Switch ATS Prewired with Flexible Settings and seamless transfer between two power sources The enclosure made of MS Power coated of necessary siz...

Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based digital readout of percentage leakage curren...

Supplying fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panelwood boardItem no 522

Supplying fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter without CTItem no 526

Supplying fixing and wiring rotary selector switch suitable for AmmeterItem no 527

Supplying fixing and wiring rotary selector switch suitable for VoltmeterItem no 528

Supplying of multi function digital meter with three line back light LCD type display for voltage Current frequency Power power factor KVA KWH KVAR suitable for 3 phase 4 wire LT network with IP 54 de...

Supplying fixing and wiring 505 to 4005Amps 5VA burden Current Transformer Class 05 accuracy with Tape WoundItem no 534

Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834 3 phase 400440 volts grade for power factor improvement of rotating machineries like induction motorItem no 537

Supply and fixing of 3pole power contactor with NONC contacts on existing woodpanel board using necessary bolts nuts washers and wiring etc complete with AC3 Rating and as per IS13947 60 AmpsItem no ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit breaking capacity...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440v AC 50 Hz 1224v DCItem no 538

Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction...

Providing laying and jointing HDPE pipes of specified grade and

conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ro...

Providing Laying and Fixing of GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including tes...

A Main Furnace Frame Supply Installation Testing Commissioning of Main Furnace Supply of Fabricated main frame for housing refractory bricks and other equipment Furnace the main door Furnace supporti...

B Refractory Materials Supply Installation Testing Commissioning of refractory items such as ceramic fiber blankets insulation bricks Hot Zone bricks IS8 Cold Zone bricks IS6 body resting bricks arch...

C Electrical Vertical Heating coil Supply Installation Testing Commissioning of vertical Heating coil Power of 42 KW Heating coils are made out of 8 swg Kanthal APM wire Nichrome 8020 wire of 8 Gaug...

D Body Charging Trolley Supply Installation Testing Commissioning of Body Charging Trolley Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipelines a...

EElectric Remote Control Panel Supply Installation Testing Commissioning of Electric Remote Control panel The control panel is built with the following components housed in Panel made out of M S shee...

F Control Power cables Supply Laying Testing Commissioning of Control Power Cables Supply of power cables bus bar laying supporting tray conduit pipes from the control panel to various equipments h...

GWater Pump Supply Installation Testing Commissioning of Water pump Supply of water pump for scrubber unit 1 Hp motor 3 Phase 415V for circulating the water in wet venture scrubber unit and necessary...

H Fresh air blower Supply Installation Testing Commissioning of Fresh air blower Made out of M S Sheet direct driven motor of 1 Hp 3 Phase 415V of suitable capacities mounted on a M S rigid angle fra...

IWet venturi Scrubber Unit Supply Installation Testing Commissioning of Scrubber unit

Wet scrubber unit with venturi arrangements made out of S S 304G sheets In unit1 smoke will completely come in co...

JOnlineExhaust Blower Supply Installation Testing Commissioning of onlineExhaust Blower Fabricated with an S S 304G sheet the impeller driving shaft is also made out of S S with bearing support mount...

KErection Charge Erection charges for

Erection testing commissioning handing over the cremation furnace

a Fixing of Frame Main Door Counterweight Mechanical and

Electrical operating door system

L Transportation Charges Packing forwarding Loading and Unloading charges from our factory in Bangalore to the crematorium site in complete manner including all lead lift as per the direction of Eng...

M Selfsupporting chimney Supply Installation Testing Commissioning of

Selfsupporting chimney

The chimney is made out of M S Plates angles flats grouting bolts gusset plates ladder platform with a pr...