8817/2021-22/E8

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 completeall as specified & directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified & directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) not exc1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work / stone work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the Govt.), complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc1.5 sqm but not exc 4 sqm each including cutting holes for taking out hold fasts or dismantling brick work / stone work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the Govt.), complete all as specified and directed.

Second class hard wood (Hollock), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

35mm thick 2nd class hard wood (Hollock) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S & F 40 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc all as specified & directed.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at siteall as specified & directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks,or galvanised wire steples all as specified & directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane all as specified & directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded aggregate as in hold fast.) all as specified & directed.

S & F M.S. Flat iron of size 25x3 mm as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe-290 Gde-E-165 complete all as specified & directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections cast aluminium alloy lenght of 250 mm all as specified & directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified & directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified & directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges all as specified & directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges all as specified & directed.

S & F aluminium handle 125 mm long anodised, cast type fixed complete all as specified & directed.

S & F aluminium handle 100 mm long anodised, cast type fixed complete all as specified & directed.

Fixing only 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete as specified and directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer all as specified & directed.

Dismantling timber scantlings 40sq.cm and over in section, in any position all as specified & directed.

Second class softwood (Kail) as in scantling, clean sawn fixed in any position with nails, unframed work, complete, all as specified and directed.

S & F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe all as specified & directed.

S & F vitreous china urinal, half stall type white with grating and union for discharge pipe down take pipe etc all as specified & directed.

S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket all as specified & directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe all as specified & directed.

S & F in repair stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified & directed.

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs all as specified & directed.

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC all as specified & directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F in repair 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified & directed.

Refixing to old steel tubing 15mm dia and connection in new or old position (wall ceiling floor etc.) all as specified & directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store all as specified & directed.

Refixing to old steel tubing 20mm dia and connection in new or old position (wall ceiling floor etc.) all as specified & directed.

S & F in repair 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in all as specified & directed.

Demolition and breaking up to 110m bore drain pipes (SGSW/AC/RCC/PVC) set in CM complete all as specified and directed

S&F vitreous china wash basin white of size 550x400mm incl waste coupling, bracket and PVC waste pipe incl taking down old and as specified and directed.

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe all as specified & directed.

S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats all as specified & directed.

S & F in repairs 110mm bore PVC Pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floor all as specified & directed.

S & F in repairs 110 mm bore PVC (SWR) bends any radius all as specified & directed.

S & F in repairs 110 mm bore PVC (SWR) vent cowl all as specified & directed.

S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gm all as specified & directed.

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 10mm thick in cm (1:4)as in ceiling , soffit of chajja etc.complete all as specified & directed.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint all as specified & directed.

M & L preparing new plastered surfaces of internal walls and applying two coats of distemper oil emulsion over a coat of primer all as specified & directed.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash all as specified & directed.

M & L preparing new plastered surfaces of walls as required and applying a coat of distemper oil emulsion all as specified & directed.

M & L preparing old plastered surfaces of walls as required and applying one coats of cement base paint all as specified & directed.

M & L preparing old plastered surfaces of ceiling as required and applying one coats of white washing all as specified & directed.

Demolition of ground floors and paving n exc 15 cm thickness(below or above ground floor) all as specified & directed.

M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement all as specified & directed.

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 40mm thick all as specified & directed.

M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified & directed.

M&L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes all as specified & directed.

M & L Rendering 10 mm thick in cement mortar (1:3) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed.

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.38sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

Cement concrete tiles in patches, area n.exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and p[ointing new or old tiles completed all as specified & directed.

M&L glazed, coloured, ceramic, tiles of size (300mm x 200 mm) x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor all as specified & directed.

Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr all as specified & directed.

Dismantling water tank and removing to stores exc250ltr n.exc 500ltr all as specified & directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified & directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified & directed.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified & directed.

M&L preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

m/S Varun Gupta

M/s Shakti Electric Works

Pathania Builders

DHANI BUILDERS

M/S Ajay Kumar Mahajan

M/s. Rishav Sood

Havish Construction