Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.7 LAccepted-AOC OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | L1 | Accepted-AOC AOC | |
| 2 | L2₹50.7 L+₹1.1 L (2.31%)Rejected-Finance MAHALAKPUR NIZAMPUR AGHWANPUR ROAD AGHWANPUR MORADABAD UTTAR PRADESH 244001 | MORADABAD | UTTAR PRADESH | 244001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹51.1 L+₹1.5 L (3.12%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹53.3 L+₹3.7 L (7.56%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹54.0 L+₹4.5 L (8.99%)Rejected-Finance ANANDAPALLY WARD NO VII P O P S MAL DIST JALPAIGURI PIN 735221 WB | MAL | JALPAIGURI | WB | 735221 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO BLDG NO LA 05 AND CERTAIN REVENUE WORK AND MINOR WORK AT BAGRAKOTE UNDER GE SEVOKE ROAD
2022_MES_544106_2
GE/SEV/24 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹80,000
Yes
22 Oct 2022
28 Sept 2022
19 Oct 2022
28 Sept 2022
17 Oct 2022
10 Oct 2022
29 Sept 2022 - 6 Oct 2022
Amount
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded. complete all as specified and as directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles Fe-290 Gde-E-165 complete all as specified and directed.
S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified and as directed.
S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified
S&F 605X605mm anodised aluminium snap grid frame work for decorative type false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.
M&L for Brickwork with subclass B brick straight and curved on plan to exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
M&L mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L 25mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base to flooring etc complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint (1st quality) complete all as specified and as directed.
M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (Reinforced) complete all as specified and as directed.
M&L RCC 1:1.5:3, type A1, 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.34 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.
M&L for preparation of new or previously untreated surfaces of walls and applying two coats weather proof exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed
M&L for preparation of new plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed
Surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed.
M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone agg) as in sub base complete all as specified.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and as directed
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
Excavation in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc. and getting out in hard/dense soil complete all as specified and directed.
M&L PCC 1:4:8, Type D-2 (using 40mm graded stone agg) as in foundation, filing and mass concrete complete all as specified and as directed.
M&L for brick work with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for shingle filling in floor or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
M&L for 40mm thick cement concrete 1:2:4, Type B-1 (using 20mm graded crushed stone agg) as in floors finished even and smooth without using extra cement complete all as specified and as directed.
M&L for glass dividing strips 38mm wide and 3 mm thick and inserted in position to conform to design complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumn in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for precast RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in cover slab set in CM 1:6 including necessary formwork complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
M&L for Formwork for rough finished surfaces to edges of concrete flats, treads, break in floors window cills, concret railling openings in concrete wall floors and roofs n exc 20 cm wide and sides RCC/PCC bands in walls horizontal or sloping and similar works etc complete all as specified and as directed.
M&L rendering 5mm thick in CM 1: 3 on fair faces of ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F mild steel screw bolts,11 to 15mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.
Supply only liquid water proofing compound complete all as specified and as directed.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
M&L for 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Cutting & screwing existing water pipe line mains and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
Preparation of old surfaces and applying one coat of white wash on walls complete all as specified and as directed
Taking down shutters of area exc 1 sqm and n exc 2 sqm each and refixing in the same opening after minor adjustments complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
Cutting chases in brickwalls pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,step, cills complete all as specified.
M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required area not exc 150 sqcm including making good to existing finishes complete all as specified.
M&L 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in paving/floors finished even & smooth without using extra cement laid in alternate bays complete all as specified and as directed.
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) including removing debris outside MD land complete all as specified and directed.
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 84 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 84 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 84 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.
S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.
S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type LED fitting 20 watt 4 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.
S&F decorative full glow square pattens type recess mounted linear 40 watt panel LED fitting 2'x'2 size with LED driver with high transmittenance luminaire for 230 volt AC, complete all as spcified and as directed.
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Taking down old serviceable/unserviceable ceiling/exhuast fan connecting wire etc and keeping at site for reuse at site after carying out repair woks to building/rewiring complete and refixing the same complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 08 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as directed.
S&F MCB, DP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe light grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, including salt & charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
Supply & install test point terminal made out of GI strips 32mm x 6mmx 30cm with GI Nuts & bolts mounted on busbar insulators (02 nos) fixed on wall as directed.
M&L for air termination single pointed aluminium rod 12mm dia and 300 mm long all as specified and as directed.
M&L aluminium strip 25x3 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified and directed.
M&L for porceiline insulator suitable for fixing earthing strip to the wall/floor etc complete all as specified and directed.
S&F galvanised iron strip 32 x 6 mm burried in ground for interconnection of earthing complete all as specified and directed.
M&L for earthing with copper earth plate electrode 600 x 600 x 3.15 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected copper strip 20 x 3 mm earth lead by means of bolts, nuts, check nuts, and washer earth strip protected by and including GI pipe 40 mm bore (light grade ) and connected to main test point as directed and including concrete pit using PCC (1:3:6 ) type C-1, precast RCC (1:1:5:3) type A-1 cover slab of size 40x40x5 cm reinforced with 8 mm dia TMT bars @ 100mm c/c both ways with one handle for lifting made out of 8 mm dia TMT bars @ 100mm c/c both ways with one handle for lifting made out of 8 mm dia MS bar embeded in precast cove slab funel with wire mesh 20mm bore galvanised or steel pipe (light grade) for watering in including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No 3 of SSR part -1 complete all as specified and directed. Note:- result of earth resistant should be less than 3 ohm.
Supply, installation, testing & commissioning of AC single phase two wire, tamper proof static meter of class 1.0, 240V, 50 Hz, 05A-60A conforming to IS-16444 and relavant IEC standards with inbuilt GPRS communication facility with default and on demand display , billing data generation facility, anti-tamper features, microprocessor and LED/LCD based circuitry complete all as directed. Make: L&T- Electrical/secured. Note: (i) Meter should support the following data : 30 min instantaneous data for voltage, current, power factor, cumulative energy, cumulative apparent energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. (ii) Meter should have connect/disconnect functionality operable from prepaid billing software. "Contractor will submit MOU signed from meter manufacturer declaring on site warranty for all meters with Ser No for atleast 10 years".
Supply, installation, testing & commissioning of AC three phase two wire , tamper proof static meter of class 1.0, 240V, 50 Hz, 05A-60A conforming to IS-16444 and relavant IEC standards with inbuilt GPRS communication facility with default and on demand display , billing data generation facility, anti-tamper features, microprocessor and LED/LCD based circuitry complete all as directed. Make: L&T- Electrical/secured. Note: (i) Meter should support the following data : 30 min instantaneous data for voltage, current, power factor, cumulative energy, cumulative apparent energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. (ii) Meter should have connect/disconnect functionality operable from prepaid billing softward. "Contractor will submit MOU signed from meter manufacturer declaring on site warranty for all meters with Ser No for atleast 10 years".
Supply and installation for mobile network charges per meter per year complete all as specified and directed. (01 year)
M S BHARAT CONSTRUCTION CO.
M/S Bikash Saha
SRI SURAJIT SENGUPTA
BIJOY DEY
The Associated Construction And Co
NARESH GUPTA
M/s. STRUCTURES INDIA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .