Upgradation Fortification, Modernization and Up gradation of Filtration Plant Complex, Sitlee under UT Capex Budget

(Construction of new guest house building along with tresspath to new guest house at Filteration Plant sitlee)Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge (All kinds of soil)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Dumping of stones on level including supply of stone

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form fo rEdges of slabs and breaks in floors and wall Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Cold twisted bars

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

20mm cement plaster finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand)

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand)

10cm thick (average) mud phaska of damped brick earth on roofs laid toslope consolidated and plastered with 25 mm thick mud mortar mixedwith bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1clay: 1 cow dung) and covered with specified tile bricks grouted withcement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finishing neat With common burnt clay (non modular) brick tiles of classdesignation 10.0

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete..complete.40 mm thick with 20mm nominal size stone aggregate.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 2 mm thick

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and manufacture, including applying additionalcoats wherever required to achieve even shade and colour.Two coats

Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).Second class deodar wood Rate for thickness of shutters in mm per sqm 30mm

Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Commercial ply on both sides

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge Second class deodar wood Rate for thickness of shutters in mm per sqm 30mm

Painting with synthetic enamel paint of approved brand and manufactureto give an even shade Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished withnecessary screws etc. complete :100x58x1.90 mm

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :100 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :75 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 110mm diameter

Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. Layers not exceeding 20 cm in depth, lead upto 50 mtr. and lift upto 1.5mtr..

Carrige of sand and stone aggregate below 40mm lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Carrige of soilig stone lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Carrige of brick lead upto 40km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Carrige of brick tiles lead upto 40km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Flexible pipe 32 mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms

Providing and fixing PTMT urinal cock of approved quality and colour : 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 15 mm dia nominal bore( medium grade)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 20 mm dia nominal bore ( medium grade)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 25 mm dia nominal bore( medium grade)

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing brass bib cock of approved quality.20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing soil, waste and vent pipes : 100 mm dia.Sand cast iron S and S pipe as per IS:1729

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipe 100 mm dia. Pipe

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 225mm

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cables in surface/ recessed medium class PVC conduit withmodular switch, modular plate, suitable G.I box and earthing the point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cables etc. as required(ISI marked)(LMR)

Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 no.4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required(ISI marked)(LMR)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x2.5 sq.mm and 1x2.5 sq.mm earth wire(ISI marked)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cables in the existing surface/ recessed steel/ PVC conduit as required. 1x1.5 sq.mm(ISI marked)

Supply and fixing of following sizes of PVC conduit along with accessories in surface/recess including cuttingthe wall and making good the same in case of Recessed conduit as required. 25 mm(ISI marked)(LMR)

Supply and fixing on existing GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 &5/6 amps modular socket outlet and 15/16 amps modular switch connection, painting etc as required(ISI marked)(LMR)

Supply and fixing of suitable size GI Box with modular plate and cover in front on surface or in recess,including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modularswitch, connections etc. as required. (For light plugs to be used in non residential buildings)(ISI marked)(LMR)

Supplying and fixing of suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 25 Amp modular socket outlet and 25 Amp modular with MCB,’c’ curve including connections, painting etc. as required(ISI marked)

Supplying and fixing of 5/6 amp Switch(ISI marked)(LMR)

Supplying and fixing of 3 pin 5/6 Amp socket outlet(ISI marked)(LMR)

Supplying and fixing of 15/16 A switch(ISI marked)(LMR)

Supplying and fixing of 6 pin 15/16 A socket outlet(ISI marked)(LMR)

Supplying and fixing of Bell Push(ISI marked)(LMR)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required(ISI marked)(LMR)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required((ISI marked)(LMR)

Supplying and fixing following way, horizontal type three pole and neutral. Sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ isolator) 8way (4+24), Double door(ISI marked)(LMR)

Supplying and fixing single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ isolator), 6way Double door(ISI marked)(LMR)

Supplying and fixing of 5 amps to 32 amps rating, 240 Volts,”C” series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as require.(Single pole) (ISI marked)(LMR)

Supplying and fixing of following Electrical items complete with connections as required. SPN 40 Amp)(ISI marked)(LMR)

Supplying and fixing of following following Electrical items complete with connections as required. SPN 63 Amp(ISI marked)(LMR)

Supplying and fixing of following Electrical items complete with connections as required. M.S.Deep Box(ISI marked)(LMR)

Supplying and fixing of following Electrical items complete with connections as required. Fan Box(ISI marked)(LMR)

Supplying and fixing of Phenolic laminated round sheet 4’’ dia average(ISI marked)(LMR)

Supplying and fixing of 16 sq.mm twin core almunium cable(ISI marked)(LMR)

Supplying and fixing of 10 sq.mm twin core almunium cable(ISI marked)(LMR)

Supplying and fixing of Angle button holder(ISI marked)(LMR)

Supplying, installation, testing & commissioning of 20 Watt 4 ft long batten type LED tube lights with all accessories incl. connection as required (Panasonic/Havell/crompton/Wipro/Bajaj)(ISI marked)(LMR)

Supplying, installation, testing & commissioning of following electrical items suitable for operating on 240/230 Volts AC, 50 Hz supply.Exhaust fan 300 mm sweep (Panasonic/Havell/crompton/Wipro/Bajaj)(ISI marked)(LMR)

Supplying, installation, testing & commissioning of following electrical items suitable for operating on 240/230 Volts AC, 50 Hz supply.Exhaust fan 300 mm sweep (Panasonic/Havell/crompton/Wipro/Bajaj)(ISI marked)(LMR)

Supplying, installation, testing and commissioning of inverter type window AC’s (copper) Cold type of minimum capacity following Specifications as detailed below:(ISI marked)(LMR) 1. Should be of inverter type 2. BEE Star rating:5 3. Maximum local temperature 52* C 4. Rated cooling capacity (BTU/hr). 1900 or above 5. Condensing coil: 100% Copper with grooved copper tubes 6. Electrical input, 220 V+_ 30/50Hz/Single Phase 7. Compressor warrant: 10 years 8. PCB Warranty: 5 years 9. Total System Warranty:1 years 10. Make Voltas

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing soil, waste and vent pipes : 100 mm dia.Sand cast iron S and S pipe as per IS:1729

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipe 100 mm dia. Pipe

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 225mm

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

(.Construction of R.C.C Road including drains for main gate to staff quarter at sitlee complex. Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge (All kinds of soil)

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)

Dismantling manualy /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead as per the direction of Engineer-in -charge. i) Bituminous road

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Cold twisted bars

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Welded

Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.

Carrige of sand and stone aggregate below 40mm lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

(Repair/Renovation of old guest house including tiling in front of guest house at sitlee complex)Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown

Flooring with marble stone of specified thickness as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thickbase of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed withgrey cement slurry including rubbing, polishing and curing complete with:Makrana White Second qualitys Rate per sqm 18mm

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Flexible pipe 32 mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms

Providing and fixing PTMT urinal cock of approved quality and colour : 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 15 mm dia nominal bore( medium grade)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 20 mm dia nominal bore ( medium grade)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall (a) 25 mm dia nominal bore( medium grade)

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing brass bib cock of approved quality.20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing soil, waste and vent pipes : 100 mm dia.Sand cast iron S and S pipe as per IS:1729

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipe 100 mm dia. Pipe

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510 x 1040mm bowl depth 225mm

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

(.Construction of R.C.C Road from C.P.Station to towards tanker filling point at sitlee complex).Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil)

Dismantling manualy /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead as per the direction of Engineer-in -charge. i) Bituminous road

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Cold twisted bars

Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.

Carrige of sand and stone aggregate below 40mm lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

(Electrification,Restoration/Revitilization of allied works at sitlee complex) Providing and fitting 3 core copper and aluminiun cables for Filtration Plants 1, 2,3 & 4 at Sitlee. 70 mm sqm 4 core aluminium armoured cable (ISI marked)(LMR)

Providing and fitting 3 core copper and aluminiun cables for Filtration Plants 1, 2,3 & 4 at Sitlee. 25 mm sqm 3 core copper cable (ISI marked)(LMR)

Providing and fitting 3 core copper and aluminiun cables for Filtration Plants 1, 2,3 & 4 at Sitlee 10 mm sqm 4 core copper cable (ISI marked)(LMR)

Providing and fixing inva tubular 200ah inverter batteries of make:- Exide(ISI marked)(LMR)

Providing and fixing of 24 volt inverter setup with 1650VA/24V square wave with voltage range from 100-270VAC frequency 50hz of make :-Luminous with stand.(ISI marked)(LMR)

Providing, fitting, installation, testing and commissioning of 16000 GPH X 25 mtr head 3 phase horizontal mono submersible clear water pumpset conforming to IS code.(ISI marked)(LMR)

Providing, fitting, installation, testing and commissioning of 16000 GPH X 24 mtr head 3 phase horizontal mono bloc clear water pumpset conforming to IS code alongwith fabrication of bends, flanges.Providing and fitting of star delta LT control panel along with 4 sq mm 3 core copper cables 10 mtr in length(ISI marked)(LMR).

Providing and fitting of star delta LT control panel along with 4 sq mm 3 core submersible copper cables 30 mtr in length(ISI marked)(LMR).

Providing and laying of delivery pipes of mild steel 100 mm dia. having thickness 4.50 mm 20 mtrs each in length including fabrication of 05 no. bends, 03 no. 100 mm dia. flanges, 01 no. expander/reducer and 01no. 100 mm dia. C.I non return valve by way of welding(ISI marked)(LMR)

Earthwork in execavation by manual means in trenches for foundations, drains, pipes , cables etc. (Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 m² on plan, depth upto 1.5 mtr including disposal of execavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in (All kinds of soil)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Dumping of stones on level including supply of stone

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge In cement mortar

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Carrige of sand and stone aggregate below 40mm lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Carrige of soilig stone lead upto 20km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Carrige of brick lead upto 40km by Mechanical transport and 100 metre head load including loading,unloading and stacking

Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 75 mm

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 75 mm bend

Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with synthetic enamel paint of approved brand and manufactureto give an even shadeTwo or more coats on new work

(Construction of steel structure view point to the tawi river at the centre of intake 3 and 1 at sitlee complex)Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form Columns, pillars, piers, abutments, posts and struts

Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form Edges of slabs and breaks in floors and walls Under 20 cm wide

Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

15mm cement plaster on the rough side of single or half brick wallfinished with a floating coat of neat cement of mix :1 : 6 ( 1 cement : 6 coarse sand)

Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections

Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Welded

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shapewherever required

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Electrical Fitting,including all accessories Flood light,Fas,Plug Points,Wiring,Led Bulbs as per requirement(Payment as per bill verified by the concerned engineer-in-incharge)(ISI marked)(LMR).

Steel 3seaters bench and table(Payment as per bill verified by the concerned engineer-in-incharge)(ISI marked)(LMR).

Please Enable Macros to View BoQ information