REPAIR MAINT OF INTERNAL ELECTRIC SERVICES AND REPAIR MAINT OF EXTERNAL ELECTRIC AND WATER SUPPLY AT TECH AREA AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down unserviceable main switches, DBs, bus bars chambers, VTPN etc any capacity including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.

Taking down unserviceable sub-main wiring (any numbers of cable) with rigid PVC/steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.

M & L for Point wiring for one light/exhaust fan/fan point/call bell controlled by one way switch with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC casing capping (ISI marked) (aprox size 20/25/40mm width) surface type with all fittings/fixtures such as Tee, Bend, elbow, socketr, shaddle etc including 1.5mm thick MS sunken/terminal box including 3mm thick backelite sheet cover for fixing flush type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface.)

All as per item No. 04 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto

All as per item No. 04 above but for One 3/5 pin socket outlet 6 amps point on same board complete ditto

All as per item No. 04 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLS (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS (ISI marked) as earth lead complete ditto

S & F switch piano Flush type, single pole one way 6 Amp 240 volts, complete all as specified and as directed.

S & F in repairs switch piano Flush type, single pole one way 6 Amp 240 volts, complete all as specified and as directed.

S & F Socket outlet 2 in 1, 3 pin, 6 Amps, flush type complete all as specified and as directed.

S & F in repair Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 6 Amp, flush type complete all as specified and as directed.

S & F in repairs Switch socket combination 2 in 1, 6 Amp, flush type complete all as specified and as directed

S & F Switch socket combination 3 pin 16A, flush type complete all as specified and as directed.

S & F in repair Switch socket combination 3 pin 16A, flush type complete all as specified and as directed.

S & F bell push flush type, 6 amp 240 volts, complete all as specified and as directed.

S & F Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.

S & F in repairs ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.

S & F Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed.

S & F in repairs Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed.

S & F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S & F in repairs Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

M & L Sub main wiring with two runs of 2.5 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through including PVC Casing capping of suitable size with all accesories and fittings, fixed to wall/ceiling etc including 2.5 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point complete all as specified and as directed by Engineer-in-charge. (Note : Two run cables and one run of earth wire and one run of casing capping will be measured as one length.)

M & L for Sub main wiring with 2 runs of Single core 4 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface PVC casing capping of suitable size with all accesories and fittings along with 1 run of single core 4 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth wire and one run of casin capping shall be measured as one length)

M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface PVC casing capping of suitable size with all accesories and fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of casin capping shall be measured as one length)

S & F in repair Rigid non-metalic PVC casing capping of size 32mm inclusive of all fittings and fixing accessories complete all as specified and directed.

S & F in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

S & F in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.

S & F LED tube light fittings, surface mounting, general purpose, in extruded aluminium housing, 20 Watt and 2000 Lumens, 6500K with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Havell's Cat No. LUMILINENEOBS20WLED840SPCSSIND or equivelant of make as per list of manufacturer)

S & F in repair LED tube light fittings, surface mounting, general purpose, in extruded aluminium housing, 20 Watt and 2000 Lumens, 6500K with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Havell's Cat No. LUMILINENEOBS20WLED840SPCSSIND or equivelant of make as per list of manufacturer)

S & F LED lamp, 12 watts, 6500K, 1200 Lumens suitable for lamp holder complete all as specified and as directed. (Make: Havell's Cat No. LHLDEUECNL8R012 or equivalent of make as per list of manufacturer's)

S & F in repairs LED lamp, 12 watts, 6500K, 1200 Lumens suitable for lamp holder complete all as specified and as directed. (Make: Havell's Cat No. LHLDEUECNL8R012 or equivalent of make as per list of manufacturer's)

S & F LED tube light fittings, surface mounting, general purpose, in extruded aluminium housing, 10 Watt and 1000 Lumens, 6500K with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Havell's Cat No. LUMILINENEOBS10WLED865SPCSSIND or equivelant of make as per list of manufacturer)

S & F in repair LED tube light fittings, surface mounting, general purpose, in extruded aluminium housing, 10 Watt and 1000 Lumens, 6500K with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Havell's Cat No. LUMILINENEOBS10WLED865SPCSSIND or equivelant of make as per list of manufacturer)

S & F 36 Watt (100lm/w), 2ftx2ft, LED recessed full lit luminaire with glare free uniform illumination with loger life and less maintenance with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Crompton Cat No. LCTLRNE-36-FO-CDL or equivelant of make as per list of manufacturer)

S & F in repair 36 Watt (100lm/w), 2ftx2ft, LED recessed full lit luminaire with glare free uniform illumination with loger life and less maintenance with all accessories, internally prewired and connecting up including tube lamp complete all as specified and directed. (Make: Crompton Cat No. LCTLRNE-36-FO-CDL or equivelant of make as per list of manufacturer)

S & F in repairs LED panel Driver 24 to 36/40 watts as per site requirement complete all as specified and as directed.

S & F LED Bulk Head, 10 Watt, IP 65 rated, compact design, PC Co extruded with high energy saving with all accessories and connecting up including lamp complete all as specified and directed. (Make: Crompton Cat No. TIS-304-10-57-SL-DP-NWH or equivelant of make as per list of manufacturer)

S & F in repair LED Bulk Head, 10 Watt, IP 65 rated, compact design, PC Co extruded with high energy saving with all accessories and connecting up including lamp complete all as specified and directed. (Make: Crompton Cat No. TIS-304-10-57-SL-DP-NWH or equivelant of make as per list of manufacturer)

S & F in repair LED 70 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, IP66, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell's Cat No. JETAALBAFLOODLIGHT70W or equivelant of make as per list of manufacturer)

S & F in repair LED 120 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, IP66, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell's Cat No. JETAIRISFL120WLED757APWBLTG or equivelant of make as per list of manufacturer)

S & F in repair LED 120 Watt Higbay luminaire, Next generation, energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell's Cat No. SAUCERGENXHBP120WLED757P90DBOLTG or equivelant of make as per list of manufacturer)

S & F Distribution Board, SPN 4 Way, 240V, Double door with IP 43 protection complete all as specified and as directed. (Make: Havell's cat part No. DHDNSHODAW04 or equivalent make as per List of Manufacturer's)

S & F Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed. (Make: Havell's cat part No. DHDPSHODRW08 or equivalent make as per List of Manufacturer's)

S & F Vertical TPN DB double door suitable for MCB/MCCB etc, 4 way (4+12 IC + OG) complete all as specified and as directed. (Make :Havell's cat part No. DHDPTVODRW04 or equivelant of make as per List of manufacturer's)

S & F MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed (Make: Havell's cat part No. DHMGCSPF006-032 or equivalent make as per List of Manufacturer's)

S & F MCB SPN 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed Havell's cat part No. DHMGCSNF006-032 or equivalent make as per List of Manufacturer's)

S & F MCB, TPN 6-32 Amps, 415 Volts, 10KA, C Curve complete all as specified and as directed (Make : Havell's Cat part No. DHMGCTNF006-032 or equivelant of make as perList of manufacturer's)

S & F 1100 volts grade, heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cross sectional area 4 Sqmm 2 core solid conductor including taking down existing one complete all as specified and directed.

S & F 1100 volts grade, heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cross sectional area 6 Sqmm 2 core solid conductor including taking down existing one complete all as specified and directed.

M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

Taking down and dismantling the ceiling fan 1200 / 1400 mm sweep of any capacity from existing position and removing its allied spare parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers etc complete complete all as specified and directed. (Note : (i) Spare parts shall be measured and paid seperately as supply only and rewinding of fan shall be measured and paid seperatly under relevant item here-in-below. (ii) The cleaning, servicing, oiling and lubricating of fans has to be carried at site itself and to be completed withing one hour unless re-winding is required. (iii) The cost of transportation from site of work to workshop and back for rewinding is deemed to be included in the unit quoted rate, (iv) Rewinding shall be carried out in contractor's workshop and fan shall be re-fixed at site withing 10 days after taking down from site. Any delay after 10 days shall be panalised @ Rs. 100.00 per day for a maximum of 10 days).

All as per Serial item No. 53 above but exhaust fan of any sweep of any capacity complete ditto.

All as per Serial item No. 53 above but air circulators/ pedestal fan/ wall mounting fan of any sweep and any capacity complete ditto.

M & L for rewinding of Ceiling fan of any sweep after dismantling with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including necessary insulating materials, insulating varnishing, cleaning, packing and reassembling and testing etc complete all as specified and as directed. ( Note: Also refer Note No. (iv) under Serial item No. 53 above)

All as per serial item No. 56 above but exhaust fan of 250 to 300mm sweep complete ditto

All as per serial item No. 56 above but exhaust fan of 350/400mm sweep complete ditto

All as per serial item No. 56 above but aircirculator/ pedestal fan/ wall mounted fan of any sweep complete ditto

Supply only ball bearing suitable for Ceiling fan of any sweep complete all as per the existing specifications and as directed (Make :TATA/ SKF / NBC)

Supply only condenser of 1.5 Mfd suitable for PVC exhaust fan and wall mounted fan of any make and size complete all as specified and as directed. (Make : Havells/USHA/TIBCON)

Supply only condenser of 2.5 Mfd suitable for ceiling fan and wall mounted fan of any make and size complete all as specified and as directed. (Make : Havells/USHA/TIBCON)

Supply only condenser of 3.15 Mfd suitable for Exhuast fan and air circulator fan of any make and size complete all as specified and as directed. (Make : Havells/USHA/TIBCON)

Supply only Fan blades set, powder coated aluminium for ceiling fan of 1200mm sweep of any make/model, Aero dynamically balanced and screwed with suitable size of mild steel screws complete all as per existing specification and as directed.

Supply only Fan blades set, powder coated aluminium for ceiling fan of 1400mm sweep of any make/model, Aero dynamically balanced and screwed with suitable size of mild steel screws complete all as per existing specification and as directed.

Supply only brass bush suitable for ceiling fan of any sweep and capapcity complete all as per existing specification and as directed. (Make: FAG/NBC/SKF)

Supply only Oscilating machanism suitable for Wall mounted fan 300/350/400/450mm sweep complete all as per existing specification and as directed.

Supply only Rubber Bush (Reel Type) standard size and type including suitable size of nuts, bolts etc complete all as per existing specification and as directed.

M & L for preparation of old painted surfaces of ceiling fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker etc complete all as directed. (Note: The ceiling fan taken down under Serial item No. 53 above shall be painted and measured under this item.)

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 25 or 32 mm bore, Steel tubing/ PP-R pipe and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 40 or 50mm bore, Steel tubing/PP-R Pipe and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Refixing/Re-laying of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete laid in trenches complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 72 above)

Refixing/Re-laying of 25mm bore old serviceable steel tubing and connections in new or old position with new fittings complete laid in trenches complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 73 above)

Refixing/Re-laying of 40mm bore old serviceable steel tubing and connections in new or old position with new fittings complete laid in trenches complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 74 above)

Refixing/Re-laying of 50mm bore old serviceable steel tubing and connections in new or old position with new fittings complete laid in trenches complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 74 above).

Supply, laying, connection and testing 20mm bore, Steel water tubing, galvanised, medium grade with all fittings, laid in trenches, etc complete all as specified and directed. (Note: Excavation and earth work work shall be measured and paid seperately)

Supply, laying, connection and testing 25mm bore, Steel water tubing, galvanised, medium grade with all fittings, laid in trenches, etc complete all as specified and directed. (Note: Excavation and earth work work shall be measured and paid seperately)

Supply, laying, connection and testing 40mm bore, Steel water tubing, galvanised, medium grade with all fittings and jointing materials, laid in trenches, etc complete all as specified and directed. (Note: Excavation and earth work work shall be measured and paid seperately)

Supply, laying, connection and testing 50mm bore, Steel water tubing, galvanised, medium grade with all fittings and jointing materials, laid in trenches, etc complete all as specified and directed. (Note: Excavation and earth work work shall be measured and paid seperately)

S & F in repair Bib taps, medium, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and as directed.

S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs, 40 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs, 50 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

S & F 80mm bore, cast iron sluice valve, non-rising stem type, both end flanged, class PN 1.6 conforming to IS -14846-2000 with iron wheel head and stainless steel spindle including necessary jointing materials like nuts, bolt, washer & rubber/fiber board gasket including taking out/down existing one complete all as specified and directed

M & L for Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 500 & n.exc 1000 Ltrs and from mouths of circulating pipes, etc. "cleaning the tank by scrubbing the deposites with wire brush after draining out water from the tank and using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with white synthetic enamel paint as "CLEANDED ON : DD.MM.YY", letter height exc 50mm and n.exc 100mm complete all as specified and directed.

S & F in repair 25 Watt, 230 Volts AC Post Top Lantern, outdoor type New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. RUBYPT25WLED830SSYMTOPC or equivelant of make as per list of manufacturer)

S & F in repairs LED, 35 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with lamp and all accessories including mounting clamps, bolts, nuts and washers and connections complete all as specified and as directed. (Make: Havell's Cat No. ENDURASUNDOWNSL35WLED765PASYBOPC or equivelant of make as per list of manufacturer)

S & F in repair on load Change over switch, with sheet metal enclosure, current rating 63 Amps, 4 pole, 415 V, 50 Hz complete all as specified and directed. (Make:Havell's Cat No. IHCNFE0063 or equivelant approved make as per list of manufacturer)

S & F in repair on load Change over switch, front operated, open execution, general purpose with side handle, current rating 100 Amps, 4 pole, 415 V, 50 Hz complete all as specified and directed. (Make:Havell's Cat No. IHCNFO0100 or equivelant approved make as per list of manufacturer)

S & F in repair on load Change over switch, front operated, open execution, general purpose with side handle, current rating 160 Amps, 4 pole, 415 V, 50 Hz complete all as specified and directed. (Make:Havell's Cat No. IHCNFO0160 or equivelant approved make as per list of manufacturer)

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab of size 350x350x50mm (reinforced with 10 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

M/S A K BROTHERS (BID ID -3307164)

M/S P R SINGH AND SONS (BID ID -3306917)

M/s Pramillabh Construction (BID ID -3308252)

M/s Sashi Enterprise (BID ID -3308097)

M/S S. P. ENTERPRISE (BID ID -3309214)

MAA COMMUNICATION (BID ID -3308089)