Seetarampur Loniyanpurva Mandir ke pass Sarvajanik Sthan par 01 Adad 16 Mtr Pole par Highmast Light Ki Sthapana Karya

Civil Work:

Supply & fixing of 16 mtr High mast shaft or approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 4mm.Top dia minium 150mm,Bottom dia 360mm base plate 32mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufacture drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.Schedule 2024SI No, 21.3.1

Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect SI.No. 23.26

Supply and wiring of submains with 2 nos. 2.5sqm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, inclduing supply of all material, labour and T&P etc required for proper completion of the work as directed by Engineer in charge.Same as in item 291 but with 3 nos 4sqmm and 2 nos 2.5 sqmm FRLSH PVC insulated copper conductor cable Schedule 2018 SI No 291B

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top On surface the cable run shat be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-in-charge, complete in all respect. The ammouring of the cable shall be properly connected with the earth conductor by clamps etc for 16sq.mm. 4 core.Schedule 2024 SI No.20 a 1.9

Supoply & fixing capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactor, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. 40 A TPN capacity complete in all respect as per SI.No. 807F(ii.

Supply and burring of safe Earthing ElectrodeT19 (How Dip Galvanized),Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixure (CCM)having anti corrosive&conductive property with 50 kgs activated soil (BFC)capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mmX3mm G.I.strip,upto switch board (from apron to switch board,the cost of G.I.strip will be extra)along with 30cm square C.I.frame with hinged cover&masonry housing.Make:As approved in U.P.P.W.D.,C.P.R.I. Certified.As per SI No.725B

Supply & fixing of 60x45 cm Radium Signboard lettering numbering etc. As per MoRTH-801

Please Enable Macros to View BoQ information