REPAIR TO JOINERY SUNKEN FLOOR PLUMBING SANITARY FITTINGS FIXTURES AND MISC EM REPAIRS ETC IN THIMMAIYA MARG KASTURBA ROAD MGSF RAK SF USMAN ROAD RLB MARG CARIAPPA ENCLAVE AND OTHER OFFRS MD ACCN UNDER GE WEST LUCKNOW

Amount

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.

M&L for with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick wall or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement ridge complete all as specified and directed. complete all as specified and directed.

S&F mild steel plates, plain or chequered, cut to size and shape as required and conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of framed work of timber scantlings 40 sq cm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B complete all as specified and directed.

M&L structural Steel work in tubular trusses including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.

M&L mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolts n. exc. 5cm long complete all as specified and directed.

S&F 5mm thick Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling of wall and ceiling board(fiber, pulp and insulation etc.) complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick wall or concrete surface including finishing the surface even and fair including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed.

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, dark shade double charged, superior quality 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not excceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, dark shade double charged, superior quality 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges including dismantling of existing stone slabs complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, including rubbing, grinding, polishing including dismantling of existing stone slabs complete all as specified and directed.

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and directed.

M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes including dismantling of existing stone slabs complete all as specified and directed

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone including dismantling of existing stone slabs complete all as specified and directed.

S&F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Ditto all as above Item No 30 but excluding snap grid complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35037PM/ Parryware (ZEN X) Cat part No. G4104A1/Plumber (AURA) Cat part No. ARA2103

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed.

S&F in repair angle valves 15mm bore, half/quarter turn, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair stop/angle valves 15mm bore, fancy type, cast copper alloy, chromium plated quarter turn with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35053PM/ Parryware (ZEN X) Cat part No. G4107A1/Plumber (AURA) Cat part No. ARA2105

S&F in repair two way angle valves 15mm bore, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Jaquar/ Parryware/Hindware

S&F in repair central hole basin mixer, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair 15 mm bore single lever basin mixture central hole for WHB system without popup waste system with 450 mm long braided hoses complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35011BPM/ Plumber (Aura) Cat part No. ARA-3104/Hindware (CORA) Cat part No. F440009

S&F in repair wall mixer provision for overhead shower with 115 mm long bend pipe, connectings legs and wall flanges, fancy type, brass chromium plated, with costed swinging spout including plugging and securing to walls suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35117PM/ Plumber (AURA) Cat part No. ARA-3101LB, (ORNAMIX PRIME) Cat part No. ORP-10117PM

S&F in repair stop valves concealed type 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing complete all as specified and directed.

S&F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S & F in repair Brass spindle for fancy type Bib cock/stop cock 15mm bore complete all as specified and directed.

S & F in repair Brass spindle for concealed stop cock 15mm bore complete all as specified and directed.

S & F in repair Brass spindle for fancy type Bib cock/stop cock of Make:- Jaquar / Parryware / Plumber complete all as specified and directed.

S&F in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and directed.

S&F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed.

S&F in repair bib tap 15 mm bore fancy type high presure of PTMT, any colour, screwed, for iron pipe and fixed (minimum weight not less than 105 grams) complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose with arms, 100mm dia, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.

S&F in repair fancy type brass chromium plated towel rack 600 mm long with lower hangers complete all as specified and directed. Make :- Jaquar Cat part No. AQN 7781/ Plumber Cat part No. U-9090/ Hindware Cat part No. F890012

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F in repair fancy type brass chromium plated towel ring with round flange complete all as specified and directed. Make :- Jaquar Cat part No. AQN 7721/ Parryware Cat part No. T6002A1/Hindware Cat part No. F880007

S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and directed. Make :- Jaquar Cat part No. AKP-35753P/ Parryware Cat part No. T6514A1/Hindware Cat part No. F840009

S&F in repair overhead shower rose with arms 450 mm long, 200mm x 200 mm size, square shape, single flow, ABS body chrome plated with grey face plate with rubit cleaning system, suitable for 15mm bore pipe and fixed complete all as specified and directed. Make :- Jaquar(Shower) Cat part No. OHS-35497, Jaquar (Shower Arm) Cat part No. SHA-455L400/ Hindware(Shower) Cat part No. F160103, Hindware(Shower Arm) Cat part No. 160099/ Plumber(Shower) Cat part No. RS-8008, Plumber (Showr Arm) Cat part No. ARMS008

S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed. Make :- Jaquar Cat part No. ALD-565/ Parryware Cat part No. T9962A1/Hindware Cat part No. F160068

S&F in repair 5.5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed. Make :- Prayag/Jaquar/Marc

S&F in repair 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed. Make :- Prayag/Jaquar/Marc

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repair vitreous china under counter type Wash basin, white, oval shape of size 555x425mmx195mm including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed. Make :- Jaquar(Florentine) Cat part No. FLS-WHT-5701/ Parryware (CASCADE NXT) Cat part No. C0407/Plumber(Arena) Cat part No. PBW-UCB-061B

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and plastic water closet seat cover, white, complete all as specified and directed. Make :- Jaquar(LYRIC) Cat part No. LYS-WHT-38851S(S-300)/ Parryware (Qube plus) Cat part No. C849F(S-305)/ Plumber (Prive) Cat Part No. PBW-OWC-3008 (S-300)/ Hindware (SPLENDER) Starwhite Cat part No. 92519 S-30

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 750x600x250mm, made out of 0.8mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F in repair PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag

S&F in repair waste pipe 32mm dia for WHB & sink complete all as specified and directed.

S & F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair 600x450x5mm thick looking mirror with fancy type PVC frame, mounted on 6mm thick AC building board or commercial plywood or PVC sheet and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repair ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair ball valve 15 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair peg set of 6, brass chromium plated, fancy type, with 40mm wide brass CP strip, fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

M&L for cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required; depth of cutting exceeding half brick but not exceeding one brick complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L mild steel work as in bands, straps, supports or clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 125x63mm factory made, double rebated, solid WPC (Wood polymer composite), paintable door frame, made from 100% lead free (single extruded process) homogeneous fine material with density not less than 780 Kg/Cum and fixed complete all as specified and as shown on drawing. NOTE: (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes fixing of frame using 06 Nos. of holdfast/dash through bolts of suitable size as directed.

S&F 100x63mm factory made, single rebated, solid WPC (Wood polymer composite), paintable door frame, made from 100% lead free (single extruded process) homogeneous fine material with density not less than 780 Kg/Cum and fixed complete all as specified and as shown on drawing. NOTE: (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes fixing of frame using 06 Nos. of holdfast/dash through bolts of suitable size as directed.

S&F 28mm thick factory made solid PVC flush door shutter, made from co-extruded three layer rigid foam sheet (single extruded process) with 0.8 to 1mm thick outer face layer having density not less than 1400 Kg/Cum and density of central core material not less than 600 Kg/Cum, manufactured by an ISO 9001:2015 certified company and fixing in frame at site as per specifications and drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F casement windows with net and grill single or multi shutter, made out of uPVC multi cavity frame section of size 60x60x2.5mm, suitably reinforced and double multi shutters divisions made by using sash mullions 50x64x2.5mm multi avity UPVC sections suitably reinforced and shutter made out of uPVC section of size 50x85x2.5mm, reinforced and welded in corners with EPDM gasket for provn of glass and air tight, outer side of shutter glazed with 5mm thick sheet glass and glass beads with hardware such as hinges, handles, stay etc and mosquito shutter made out of uPVC extruded section of size 61x27x2mm with 1.2mm thick GI channel, welded in corners and fixed as per manufacturer's instructions, MS grill of 12 mm round pipe inserted in main frame and screwed by hidden screwing system with powder coating complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.

S&F 75mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.

S&F rubber beading of size 65x5mm, superior quality and fixed to bottom of door with nails and washer etc. complete all as specified and directed.

S&F in repair 18/19mm thick block boards, grade 2 quality, interior grade, commercial type fixed with screw/nails to timber frame work as in pelmet boxes/ cup boards and cabinets etc including 6mm thick teak wood lipping alround complete all as specified and directed.

S&F in repair 18 mm thick factory made solid WPC flush shutter made from co-extruded three layer rigid foam sheet (single extruded process) with 0.8 to 1mm thick outer face layer having density not less than 1400 Kg/Cum and density of central core material not less than 600 Kg/Cum manufactured by an ISO 9001:2015 certified company and fixing in frame at site as per specifications and drawing complete all as specified and directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

M&L 0.90mm thick Decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F in repair PVC tank cover with locking arrangement for 500/1000 ltrs water tank complete all as specified and directed.

S&F in repair Flush Handle for any respective pattern of low level flushing cistern any description complete all as specified and directed.

S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin/urinal etc. with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair 20mm dia mild steel PVC coated curtain rod, superior quality, any colour, with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S & F in repair fancy type chromium plated Soap dish 100mm size complete all as specified and directed.

S&F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.

S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints laid in trenches or in floor complete all as specified

S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints laid in trenches or in floor complete all as specified

S&F 100 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

S&F 100 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) with oval access doors complete all as specified and directed.

S&F 75 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

S&F 75 mm bore CI bend(any radius), diminishing pieces or tapers (large bore measured) with oval access doors complete all as specified and directed.

S&F CI cowl 75 mm bore fixed with cement joint complete all as specified and directed.

S&F in repair 75 mm dia cast iron nahani/floor trap, with CP grating including jointing to waste pipe and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

S&F in repair alumunium handle, fabricated type, anodised 100 mm long complete all as specified and directed.

S&F in repair alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S&F in repair 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S&F in repair 150mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S&F in repair 0.56 mm thick plain aluminium sheeting as in door shutters fixed with nails complete all as specified and directed.

S&F in repair 0.47 mm dia stainless steel wire cloth with average width of aperature 1.18 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed..

S&F in repair Gypsum Board 12mm thick (textured finish), white prelaminated sett embossed reinforced designer ceiling boards of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to the structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm C/C to form 1200x 600 mm modules cross tee longer than 600mm to be supported independently 1200x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be made of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturers instructions complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surface of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment of wall and M&L for two coats of oil bound distemper on previously treated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and directed.

S&F anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles including glazed with 5mm thick tinted glass complete all as specified and directed.

S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

M&L for taking down existing sunken treatment (excluding PCC) and cleaning sunken floor surface by washing rubbing etc. and removing the material retrived to a distance n. exc. 500 m and providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm stone aggregate) as in sub base complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 159 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 159 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 159 above but for One bell/ buzzer point controlled by one bell push

All as per Item No 159 above but for One light point controlled by two, two way 5 Amp switch

All as per Item No 159 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

S&F call bell, ding dong type, AC single pole, 230 volt complete all as specified and directed.

S&F ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in repair wall mounted 18/20 W LED integrated tube light fitting of size 1200mm long batten with aluminium housing and decorative end cap and one no 18/20 W LED 6000 K, 230V, with integrated electronic driver complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with 3 core flexible copper wire complete all as specified and directed. Make: Havells cat no. LUMILINEPLUSBS20WLED865SPCSS or Surya Visco cat no. 18W LED SLEBT 20 IL or C&S cat no. LTT4F20WLED/W/ Philips Cat part No. 021LED22S6500/400 PSU GR/SI.

S&F in replacement bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED 6000K including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vistaglow ordering code : WT140WLED7SCWPSUS1PC/ Havells hexa 10 W- IP 66 ordering code: HEXAFT10WLED857SSYMBOPC/C&S (Sirius Series) ordering code: LTB10WLED

S&F in replacement wall/surface mounting luminaries (Mirror Light) integrated LED Batten (2 feet) 9/10 W, 6000 K, 230V with extruded aluminium housing & integrated electronic driver complete including necessary electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as per specified and directed. Make: HAVELLS cat Part No. Lumiline plus BS 10WLED865SPCSS/ Surya Visco cat Part No. SLE BT 10/C&S cat Part No.LTTB2F10WLED/W

S&F in replacement LED lamp 7/9 watt, complete all as specified and as directed. Make: HAVELLS cat Part No. LHLDEUEEML8R007/Surya cat Part No.9 W NEO MAX LED LAMP/C&S cat Part No. LTHPLEDLAMP7WB22BULB

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sheet metal enclosure for MCB DB double door type, tripple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 415 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 415 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, tripple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

S&F in repair security light fitting of 25 W LED 6000 K, with high power LED source (more than 100 lumens per watt), PDC housing, IP65 with 4KV inbuilt surge protection driver and one no. 25W LED tube, with all accessories, prewired with and fixed to bldg/pole including GI bracket 1.20m long bent to shape, made out of 40mm dia GI light grade pipe with nuts, bolts and washers and provn of connection from ceiling rose to luminaries with suitable size copper wire complete all as specified and directed. Make: Havells Endura Pearl cat no. ENDURAPEARLSL25WLED757SASYTOPCMP or Surya Lexon Cat Part No. SLE UL 25W IP 66(LXN)/ C&S (Indus E Series) with cat Part No.LTESS25WLED/LS/ Philips Cat Part No. BRP042LED25CWR1S1PSU GR

S&F in repair integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution, spun aluminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed.Make C&S Cetus cat Part No. LTGLC30W HPLED/W/Havells Model Rubyclear cat Part No.RUBYPT25 WLED 757PSYMTOPC/ Surya ETOPP SLE PT 30 W-ETPP

S&F in repair wall light with Decorative wall light fixture made up of Polycarbonate, (Spiral B-22 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connections arrangements complete all as specified and as directed. Make Havells code : CITY 1 LHDL02160099 or equivalent in Bajaj/Philips(Grace) Cat part No. 919215850005 (Note: Rates incl 01X 9 W LED Bulb with each fitting)

S&F in repair wall light with Decorative wall light fixture made up of metal synthetic white colour and square base with bend pipe and glass globe with nickel finish (Lamp base B-22 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connections arrangements complete all as specified and as directed. Make: Philips model Grace/ Jaquar cat part No. JNL-NKL-WLBPGG001E27/ Mepro Cat No. MBBS-803 (Note: Rates incl 01X 9 W LED Bulb with each fitting)

S&F in repair of surface type round LED 12W downlighter of dia 160 mm as required all as per specified and directed. Make: Havells cat part No. EDGEPRORDDLR12WLED840S/ Surya (Stellar) cat part No SLE DLS 12W XX Stellar RD/ C&S (CORONA) LTCRSUR12HPLEDRND/W

S&F in repair of surface type square LED 12W downlighter of size160 mm x 160 mm as required all as per specified and directed. Make: Havells cat part No. EDGEPROSQDLR12WLED840S/ Surya (Stellar) Cat part No. SLE DLS 12W XX Stellar SQ/C&S (CORONA) LTCRSUR12HPLEDSQ/W

S&F in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size 1200 mm complete standard fittings and fixtures including fixing on walls/roofs with fitting arrangement including neccessary electric connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed. Make: Havells cat Part No. REGALBATTEN8UPTO1X22WDSBSWH/ Surya Batten cat Part No. SUB118 T8 LED/ C&S (CRUX) cat Part No. LTICIX161820W LED/ Philips Cat Part No. TMC 100 1xT LED 13-20W WH

S&F in repair FTL with ultra bright crystal LED tube rod, 18/20 W, 6000 K with high efficency including neccessary electrical connection by disconnecting old elecronic ballast connection if required complete all as directed. Make HAVELLS cat Part No. CRYSTAL1213T8DSTL20WLED 865SGLASS/ Surya LED TUBE cat Part No. SLE TL DS 18 GL/ C&S (CRUX) cat Part No.LT4F20WLEDT-8/WD/ Philips cat part No. 20W 865 T8 IND

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 m deep below normal ground level, connected to galvanised earth lead wire 4.0 mm dia 7.5 m connected to main switch board by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

kaushalya construction

M/S Chandra Mohan and Sons

M/S Reliance Construction

rajan construction