PROVISION OF CERTAIN B/R AND E/M MAJOR REVENUE AND MINOR WORKS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Note : In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as spd..

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as spd.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft and loose soils.

M&L providing Cement Concrete in foundations, filling and mass concrete type D2 ,1:4:8 (using 40 mm graded aggregate) complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified.

Removing excavated soil exceeding 250m but not exceeding 500 m and depositing where directed

M&L precast cement concrete block masonary with solid blocks C1, 1:3:6 exc 10cm in width and setting in CM 1:4 complete all as specified.

M&L providing Cement Concrete in foundations, filling and mass concrete type C2 ,1:3:6 (using 40 mm graded aggregate) complete.

M&L for rendering 15mm thick on fair faces of brick works in cm 1:4 finished even and smooth without using extra cement using water proofing compound as per manufacturers instruction complete all as specified(WPC to be measured and paid separetely) .

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F rolled mild Steel work Fe-410-W(Gde- E-250) quality-A' in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as spd.

M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

M & L 150 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in hard standing finishing the surface even and smooth without using extra cement complete all as specified.

M&L Hardcore of Broken stone / boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified

M&L Glass dividing strips, 3 mm thick, 38mm width complete all as specified

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

M&L for 100mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings complete all as specified.

M&L for sand filling under floors or in foundations including watering and consolidation etc spread, levelled and rammed including watering complete all as specified and directed.

M&L machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type)in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-30 grade complete all as specified.

M&L Plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10cm long complete all as specified.

M&L for PCC (1:2:4) type B-1 using (20mm graded stone aggregate) for benching Coping etc incl necessary form work

Supply only integral water proofing compound.

M&L for concrete bed to drain pipes 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D-2 complete all as specified and directed.

M&L for 200 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specifed and directed by Engr-in-charge.

M&L for Precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary from vwork and set in CM (1:4) Note :- reinforcement will measured and paid seperately

S&F MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking. bending hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia comp ete all specified and as directed.

Cutting into existing manholes for connecting new drains pipe internal dia 150 mm ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and directed by Engineer-in-Charge. Note: Only punned thickness shall be measured for payment purpose.

Supply and lay common burnt clay building bricks sub class 'B' of designation 75 laid in trenches as protection to cables complete all as specified and as directed.

M & L for Road cutting / hard standing for taking up or laying of LT UG cable upto a depth of 15 cm, after laying of cable, well ramming to the excavated soil and repair the exvcavated portion of road as existing or by providing suitable mixture of PCC all as specified and as directed.

M&L for 40 mm bore new galvanized steel tubing, light grade, with all fittings for protection of cable including taking down unsv GI tubing complete all as specified and as directed.

Supply, laying, testing and commissioning LT UG Cables , XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, of size 10 Sqmm, 4 core cross-sectional area complete all as specified and as directed.

All as per Item No. 34 hereinbefore but 25 Sqmm 3½ core all as specified and directed

Supply and Fixing Pole mounting junction Box (Looping Box) for street light for 3 Phase 4 Wire system with internal mm comprising of PVC connection and one MCB 6 Amps including Mounting arrangment . Model no GSJB 2520 of Sintex or Make Sintex /Havells /Spelsbary

Supply and connect new PVC insulated twin core copper conductor flexible cable of 1.5 sqmm Including Taking down existing unsv cable and complete all as specified and directed by Engineer-in-Charge.

S&F New generation, IP 65 post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire 35W with high power LEDs as light source complete all as specified and as directed. Make: Havells, Model No:CORALPT35WLED757PSYMTOPC or equivalent in CG, Phillips. Note:- quoted rate shall be inclusive for all fixing arrangement on pole like GI pipe, nut, bolts etc.

Supply and laying GI tubing of size 50 MM dia, medium grade ISI marked with all fittings including fixing/grouting in PCC foundation for mounting of post-top land scape luminaire complete all as specified and as directed by the engr-in-charge.

M&L for painting the external exposed surfaces of steel tubular sewaged/ GI pole of any size alongwith cross arm, brackets and connected accessories with one coat of aluminium paint including preparation of old painted surfaces and pasting radium red stickers / paint with 3 line around the pole and numbering of pole with synthetic enamel white paint on black base complete all as specified and directed

Supply and installation on LT Electric Control Panel, cubical type, for Out door use Floor mounted made out of CRCA outer sheet of 3 mm thick and inner sheet of 2 mm thick and angle iron legs of size 40mm x 40mm x 5mm having front and rear open hinged doors with front openable shutter for each MCCB / Timer with spreader compartment withfully enclosed bus bar chamber, having insulated busbar made out of aluminium strips of rating 150 Amps for 3 Phase , 415 Volts,50 Hz , 4 Wire system, with cable entry provision with suitable lugs , gland, Voltmeter, Ammeter, CTs and Phase indicator complete , duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete and nut, bolts, washers for connection of cable, including necessary PCC work of height 45 cm from ground level and white washing to the platform including dismantling the old unsv panel board complete all as specified and equipped with the following items :-

M&L for pole earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, connected to & including 4.0mm galvanized iron lead as earth lead, extended upto 7.5 m 'or' upto test terminal point, drawn through 20mm dia light grade GI pipe for protection of galvanized iron strip in the ground, further connecting with suitable size of earth strip to pole including excavation, earth work, charcoal and salt in alternate layers on all sides sorrounding the earth plate, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, including breaking and removing the old unsv earth materials complete all as specified and as directed.incl taking out unserviceble Earthing complete all as specified and directed

Supply, installation, connect, test and commissioning of hi wall split units indoor / outdoor with suitable capacity complete with cordless remote control unit, with in built air ioniser, bio filter for better indoor air quality, leakage detector, LCD 7 Segment display, double drain, stabilizer free operation (work efficiently b/w 150-280v even at 48 degree C etc, with minimum 5 star rating with inverter technology and EER above 3.3 of capacity 1.5 TR (Copper condensor), operated using environment friendly refrigerant gas R410a/R32 inclusive of suction and discharge lines with suitable size of copper tubes, neccessary brazing, provision of nitrile tubing over gas circulating copper tubes up to 10 mtr, neatly tying the ends with PVC insulating tape, stand for outdoor unit, provision of suitable drain pipe for disposal of waste water upto ground level and testing complete all as specified and directed. Notes : (i) Quoted rate deemed to be included cost of making necessary hole into stone/brick wall for copper tube & power cord and making good to damage all as existing. (ii) Outdoor unit shall be mounted on MS bracket and quoted rate is inclusive.Make : Carrier / Daikin / Havells/ Voltas.

M&L for Sub main wiring with two runs of single core 2.5 Sqmm multi stranded copper conductor PVC insulated unsheathed, FRLS Cable, 1100 Volts grade and one run of 2.5 Sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non metalic ridig surface / recessed PVC conduit, 25 mm dia and conduit accessories complete all as specified and as directed. Note : Two runs of wire, one run of conduit and one run of earth conductor wire shall be measured as one unit length.

M&L for Sub main wiring with two runs of single core 4 Sqmm multi stranded copper conductor PVC insulated unsheathed, FRLS Cable, 1100 Volts grade and one run of 4 Sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non metalic ridig surface / recessed PVC conduit, 25 mm dia and conduit accessories complete all as specified and as directed. Note : Two runs of wire, one run of conduit and one run of earth conductor wire shall be measured as one unit length.

Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories on surface/recessed any type of wall including stone masonry if required, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6 sqmm cable conductor, one run of 6 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Supply & fix single pole and neutral enclosure with a two pin, earth plug and socket concealed in wall complete with one 20 Amps single pole MCB including necessary electrical connections and fixing arrangements all as specified and directed .(For AC)

S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc fixed to wall and making good disturbed surfaces of wall including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. Make : Schneider/ Havells/ Legrand

Supply & fix, MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge. Make : Havells / Schneider/ Legrand

Supply & fix MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge. Make : Havells / Schneider/ Legrand

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with built in thermal overload protection, initial time delay system, low & high voltage cut off protection and of capacity 4 KVA complete all as specified and directed. Model VG400 of Make:V-Guard /Vinitec/Sinetrac

Supply and fixing Wall light along with Red /Green 3/5 Watt Bulbs all as specified and directed.

Material and labour for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing PVC Box of size 4'' X 7'' suitsble for fixing holder on it all as specified and directed.

M&L for Modular switch 2 way 10A,1 module single pole, all as specified and as directed.

M&L for Modular White cover plate with frame,2 module, all as specified and as directed.

Supply and fixing of Modular 2 way pvc Box Suitable for mounting switches complete al as specified and directed.

Supply and Installation testing of portable type circular in shape fiber fountainof size 4 feetx 2 feet with foldable handle ,water proof UV RGB lights(IP68) with dimmer and color control ,outer base FRP, brushed aluminium,or marble finish plastic , stainless steel or food grade HDPE inner tank liner,pump system with on/off switch pressure controller fine mesh filter at pump inlet ,water fall /waterjet from outer ring edge to centreand detachable jet nozzle fog generation for mist effect complete all as specified and directed. Make : Sargam Polymer HSN/SAC 7019 or equivalent as approved by GE.

Supply and fix in modular Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal with box complete all as specified and directed.

Supply, laying, testing and commissioning cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core

S&F of street light pole box of size 200mm x 160mm x 98mm, made of high quality thermosetting plastic polyesterene, dust and jet water proof, chemical/acid corrosion resistantr impact and shock proof IP 65 with internally imbedded gasket (PUR) including 1 No SP MCB 6 Amps alongwith door arrangement and pre-moulded knock out all the sides including back of the base. The box must be fitted with 10 Sqmm stud type terminal 04 Nos including Elmex stud type TB 04 Nos (Make Hensal or equivalent)

Supply and Fixing Gong Bell size 8" , 220 Volt complete all as specified and directed.

Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body.

Supply and fix 80 mm DI sluice valve wheel head, rating PN 1.6, Steel spindle, bolts and nuts, rubber or fiber board gaskets, including taking out old unserviceable CI Sluice valve from existing position by opening the nuts, bolts, jointing rings etc., complete all as specified and as directed by for the following sizes:- Make: SIR / Kirloskar / BIR / Durga.

Supply and laying GI tubing medium grade ISI marked with all fittings fixed complete to walls and ceiling or laid in floors incl. making good of disturbed surfaces and complete all as specified and as directed for the following sizes :- Make:TATA / JINDAL / PRAKASH.

Supply & fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed and seating on iron pipe line and fixed properly of following sizes including taking out unserviceable gun metal gate / ball valve:- Make: Zoloto / Leader / Tiger / Cresent.

Cutting of DI/CI/GI pipes in position for insertion of new Tees, branches, Tail pieces and sluice valve for 100 mm dia pipe etc. complete all as specified and as directed.

Material and labour for cutting road/hard standing not exc. 0.60 mtr wide and not exc. 0.25 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing with cement mortar complete all as specified and as directed.

POWER CONSTRUCTION COMPANY (BID ID -3482047)

NEWS CONSTRUCTIONS (BID ID -3482303)

VACON INFRASTRUCTURES (BID ID -3481940)

KOGANTI CONSTRUCTION COMPANY (BID ID -3476697)