11 KV Narholi Feeder Bifurcation Work Under Semi Turnkey Besis

Amount

Part-A (Supply of Material) 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable

11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor

M.S. Top Channel 125x65mm, 3200 mm (10.7kg/mt) with clamp, bolts, nuts and washers

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

11 KV Pin Insulator with G.I. Pin, nuts & washers

11KV 45 KN Disc fitting T&C type complete

Stey Complete (G.I. Stay Rod 16x1800mm, Stey Wire, Stey Clamp, Insulator, N/B etc.)

11KV V-Type Cross-arm (Angle 65x65x6mm)

F-bracket with bolts & nuts

E-Brackets with nuts & bolts

Holding clamps for Top channel, MS Channel & MS Angle with bolts & nuts

Bolt, Nuts & Washer

Part -B (Labour Work) Carriage of 9/11 Mtr Long ST Pole from 132 KV Store Center Mathura to dump site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)

Carriage of 11 KV XLPE Cable size 3x185 sq.mm. from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)

Carriage of Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel and other required material from Store Center at 132 KV substation Mathura to the site of work including loading and unloading of material at both ends.

Erection of single pole structure 9/11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Double pole/Section Pole structure 11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms including grouting of pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material.

Erection of Tri Pole structure 11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms including grouting of pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material

Installation of stay set with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works.

Earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour T&P and required material for such work.

Removal of Old/Damaged Conductor from HT Line by opening of all jumphers and its binding.

Laying, sagging stringing and binding of ACSR Dog Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Chopping of Tree branches to Clear the route properly.

Straightening of 11 KV Line tilted pole structure on ST Pole at various places by straightening of pole including the cost of labour ,T&P charges required for proper completion of work (inside/outside village)

Re-sagging of loose H.T/L.T line as per direction of supervising engineer. It includes the cost of labour, T&P etc required for proper completion of work.(work will be done inside and outside of village)

Digging of trench for removal of damage 11 KV/ 33 KV cable from the trench for cutting of damaged portion of cable and increasing the length of cable from extra loop and Re-Dressing of trench after completion of work as per direction of supervising engineer. (Approximate depth 1.8/2.5 Mtr deep)

Laying, sagging stringing and binding of 11 KV XLPE Cable size 3x185 sq.mm. on the erected PCC pole/STP including jumphering as per RESPO manual.

Fixing of 11 KV Cable Jointing Kit 3x120/3x185 sq.mm outdoor/indoor including removal of insulation, semi-conductor of the cable end and filling of cable box complete work (including fixing of cable box in the cubical meter box) as per direction of supervising engineer.

Grouting of PCC/ST pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material.

Safe loading of 11KV V.C.B. in store center at 132 KV S/s Mathura with the help of Crain/Hydra machine including all accessories complete.

Carriage of the new 11KV V.C.B. from store center at 132KV S/s Mathura to 33/11 KV S/s Navada as per direction of supervising engineer. Approximate distance 30 Km.

Safe unloading of 11KV V.C.B. at 33/11 KV S/s Navada with the help of crain/hydra machine including all accessories complete as per direction of supervising engineer.

Very carefully shifting of 11KV V.C.B. panel from outside of control room into the control room as per direction of supervising engineer.

Installation of 11KV V.C.B. in control room at 33/11KV S/s Navada with grouting and making all connection ie. Bus bar etc. as per direction of supervising engineer.

Earthing of V.C.B. panel by the chemical earthing as per direction of supervising engineer.

M/S PRAVEEN ELECTRIC COMPANY SALES

M/s. Siddhi Vinayak Enterprises, Agra