Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-Finance 31 1 6 SEBADAL ROAD UDAYPUR NIMTA KOLKATA 49 | 24 PARAGANAS NORTH | WEST BENGAL | 700049 | ₹1.7 L | L1 | Accepted-Finance Accepted as L1 |
| 2 | L2₹1.8 LRejected-Finance | ₹1.8 L | L2 | Rejected-Finance Rejected as L2 |
| 3 | L3₹1.9 LRejected-Finance NARAYANGARH DOLTALA GHOLA CANNING PIN 743376 | CANNING | SOUTH 24 PARGANAS | WEST BENGAL | 743376 | ₹1.9 L | L3 | Rejected-Finance Rejected as L3 |
Tender Value
₹2.0 L
EMD Value
₹4,095
Closing Date
6 Mar 2026, 12:00 pmClosed
AE,SKHESD I
O/o The Assistant Engineer South Kolkata Health Electrical Sub Division-I, P.W.Dte. K.S.Ray T.B. Hospital, Jadavpur, Kolkata - 700 032
Electrical Installation work in the pump room for setting up of section office for PWD electrical Dept. at Bijoygarh SGH ,South 24 Pgs
2026_WBPWD_1011063_1
WBPWD/AE/SKHESD-I/NIT-20/25-26
Open Tender
ELECTRICAL WORKS ORG
15 days
Bijogarh State GEneral hospital
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,095
8 Jun 2026
19 Feb 2026
9 Mar 2026
19 Feb 2026
6 Mar 2026
24 Feb 2026
Supplying and fixing 2 + 10 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incl. Supplying and fixing 240 V MCB Isolator/MCB on din rail of it and necessary connection as required. Incoming - 40 A DP MCB Isolator --1 no's outgoing--6-16A SP MCB of Breaking capacity 10kA & C characteristics--10 no's (Make-Legrand/ABB/LK)
Supplying and fixing 240V 32 A DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall. (Make -Legrand/ABB/LK)
Supply & fixing 240 V 25A Timer controller in SS double door (2+10) way DB enclosure with IP-43 ( Make-LK ) or equivalent with S&F following electrical accessories & front door key locking arrangement with all connection by finishing the ends of 2 x 4 & 1 x 2.5 copper wire dowels solder less socket by crimping method as to GS earthing attachment on wall with suitable size MS Flat Inc. Necessary connections as per direction of EIC:- i) 10kA C-curve,240V 25A DP MCB (LK/Schindler/ABB)---1 no. ii) 24 Hr programmable digital time switch(LK/Schindler/ABB)---1 no.
iii) 2 pole power contractor (LK make cat no MNX22/230) ----1 set iv) LED indicator( Red/Green) ---- 1 Set v) 3 Module plate with cover-----1 no. vi) 20A auto-off-bypass SPDT toggle switch(Approved make/reputed make)-----1 no. vii) 10 A Modular type switch-----1 no. viii) Outgoing connection make ELMAX(Approved make)-----1 no ix) Modular starter 25A --- 1 No
Supplying and Drawing 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed single core stranded copper wire (Make: Havells/ Polycab/ KEI/ Gloster) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Distribution wiring in 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make: Havells/ Polycab/ KEI/ Gloster) in 20/25/40 mm size PVC rigid conduit 'FR' (Precision/Polycab make, MMS/HMS type) incl. necy. fittings as required.
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
3 x 22/0.3 (1.5 sqmm)
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Supplying and fixing 20 mm dia corrugated flexible PP Conduit [Precision/Polycab make, MMS/HMS type] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.
Supply and fixing corrugated flexible conduit gland at the end of 20 mm flexible corrugated conduit after making necessary holes etc incl all necy items as required.
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make: Havells/ Polycab/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision/Polycab make, MMS/HMS type), with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch (Black or white as directed by EIC) fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching colour) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish
Average run 6 mtr
On Board
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Havells/ Polycab/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision/Polycab make, MMS/HMS type), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching colour) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box making earthing attachment, painting the MS box and mending good the damages to original finish Average run 9 mtr
Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Anchor) (Black or white as directed by EIC)on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch(Black or white as directed by EIC), indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/Perspex cover and making necessary connections as required. (Make: Anchor)
Supply & Fixing Socket type fan regulator (Step type) (Make: Anchor) on existing sheet metal switch board with bakelite/Perspex top cover by screw after making housing for regulator knob by cutting bakelite/Perspex top cover incl. making necy. connections etc.
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
175 mm x 100 mm x 65 mm
200 mm x 150 mm x 65 mm
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
175 mm x 100 mm x 65 mm
200 mm x 150 mm x 65 mm
Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]
Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling with MS "Z" Clamps and suitable size MS fastener, etc. as required
Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]
5W LED Bulb B22 Base
12 W LED Bulb B22 Base
Fixing only lamp
Supply & Delivery of minimum10-12 Watt LED Bulkhead light fittings complete with all accessories having die cast aluminium housing finished in premium white powder coating with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]
Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.
Supply & Delivery of 240V,45 W LED street lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]
Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated]
Sweep Size- 900 mm (36"), Wattage ≤ 45 Watt, R.PM ≤ 450, Air Delivery ≥ 130 C.M.M
Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 380, Air Delivery ≥ 210 C.M.M
Supply & Delivery of 230V, 50Hz, 450 mm sweep heavy duty full metal body wall bracket fan having wattage ≤ 90 Watt, RPM ≤ 1350, Air Displacement (In CMM) ≥ 100 complete with all accessories. (Make - Orient/Crompton/ EPC) [BEE star rated]
Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient CROMTON) [ISI mark, IP55 rated] 225 mm (9"), 4 Blade, RPM ≤ 1400 , Wattage ≤ 45 Watt, Sound level ≤ 49 dB, Air Displacement (In CMH) ≥ 440
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F safety wire , connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:23 cm Exhaust fan (9")
Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23 cm Exhaust fan (9")
Supplying & fixing 25 mm medium gauge of the following dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing materials as required.
Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint: 2 Coats of synthetic enamel paint after applying one coat of red lead /Zinc chromate priming.
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on wall with bolts, nuts etc. including painting with anticorrosive paint.
Fixing only TPN switch fuse units in Sheet Steel enclosure with HRC fuses on angle iron frame on wall for 32A to 400A.
Re fixing 50 mm dia corrugated flexible PP Conduit [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.
Cost of Dismantling of all the electrical equipment's like fans, tube lights, power sockets ,distribution boards ,panels etc with one's own tools' and tackle and shifting them properly from site to designated store as per direction of EIC incl mending good damages to original finish
S&F of 1 nos ---- 6’(W )X 2'(H) X6”(D) glow signboard with matter as written ,letter(white colour) ) as given by concerned dept. made with GI sheet metal 0.45 mm thick boxing (all sides except front) arrangement with 3 nos of 20 W LED tube light inside with 2.5 mm thick superior quality poly carbonate base vinyl pasted facia(Blue colour) of required size including 0 .5” aluminum strip corner covering at all front corner sides including required internal wiring, painting the four sides with primer and two coats of synthetic enamel paint. Total glowsign board should be fabricated with hollow square shape MS pipe (each side 0.5 inch and thickness 1.5 mm) Matter- PWD ELECTRICAL CALL CENTRE Letter Size - 1st Row - 6"x4" -14 Characters 2nd Row - 6" x 4 " -11 Characters Space between letters - 0.5 "
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe
Excavation of soil for installation of Earth Electrode and filling & ramming (For Soft soil)
Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 6 SWG
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.
[Make and model no. of each and every item to be approved by EIC]
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2482636.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid