CONSTRUCTION OF HOSTEL BUILDING IN WARD 25 ZONE 06 LIMITS

CONSTRUCTION OF HOSTEL BUILDING IN WARD 25 ZONE 06 LIMITS

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Vol-2, P-9, I.No-5.4, S.R-2023-24)

Providing and Filling in foundation with granite / trap broken metal 100mm. and

down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour w...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all

Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreadin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The g...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The g...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing & fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspens...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size compri...

Providing and fixing in position windows half paneled shutters at bottom

and half glazed at top for window shutters with Honne wood stiles and rails of 35mm. thick, 75mm wide in two halves with panel...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of require...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complet

Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete : 150mm (P.No. 175/I.No.20.26.1 of SR 2021-22 vol 2)

Providing and fixing chromium plated brass 100 mm mortice latch and

lock with 6 levers and a pair of lever handles of approved quality with

necessary screws etc. complete (P.No. 107/I.No.12.60 of S...

Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g ( Vol-2, P-120, I.No-13.17.1, S.R-2023-24)

Providing and fixing PTMT stop cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g ( Vol-2, P-120, I.No-13.18.1, S.R-2023-24)

Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 g ( Vol-2, P-120, I.No-13.19, S.R-2023-24)

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 g ( Vol-2, P-120, I.No-13.20.1, S.R-2023-24)

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 g ( Vol-2, P-120, I.No-13.21.1, S.R-2023-24)

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia ( Vol-2, P-120, I.No-13.22.1.1, S.R-2023-24)

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less th...

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms ( Vol-2, P-121, I.No-13.25, S.R-2023-24)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.( Vol-2, P-121, I.No-13.26, S.R-2023-...

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length ( Vol-2, P-121, I.No-13.27.2, S.R-2023-2...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20 mm nominal bore, weighing not less than 40 g( Vol-2, P-121, I.No-13.28.2, S.R-2023-24)

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. ( Vol-2, P-123, I.No-13.35, S.R-2023-24)

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks ( Vol-2, P-123, I.No-13.6, S.R-2023-24)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& w...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 600X850 mm internal d...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with stan...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with t...

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & all necessa...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Rewinding of submersible pumpset with copper winding wires of

appropriate guage, as per specifications and / or directions of the

departmental officials, including all materials, labour, equipment ...

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75x75x65mm ( P-2, I.No-1.4.1,...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm ( P-2, I.No-1.4.2...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm ( P-2, I.No-1.4.3...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 180x90x65mm ( P-2, I.No-1.4.4...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 1-...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 6 ...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 8w...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 10...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing ...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps one way( P-8, I.No-3.6.1, S.R-20...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps two way( P-9, I.No-3.6.2, S.R-20...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps 3 way socket( P-9, I.No-3.6.3, ...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone socket etc on existing modular switch plate. IS 3854 and IS 1293 32Amps DP switch( P-9, I.No-3.6.9, S.R...

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existing PVC conduit /Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insul...

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existing PVC conduit /Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insul...

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existing PVC conduit /Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insul...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified ...

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ….mm conduit using necessary machine screws. 80/90mm ( P-9, I.No-3.10 S.R-2023-24)

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...