REPAIRS TO FLOOR JOINERY WALL PLASTER WS SANITARY FITTINGS OH TANKS PLUMBING WORK ETC FOR MD ACCN IN NAVY NAGAR AREA, AYUDH VIHAR II OTM ACCN UNDER AGE BR I AT KARANJA

Amount

S & F in repairs 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore bib taps, fancy type chromium plated cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15mm bore stop valves, fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repair water closet squatt pattern complete vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest excluding flushing cistern & flush pipe complete all as specified and directed.

S & F in repairs PVC symphonic action type , flushing cistern low level , white , with inlet , ball valve , float and handle including brackets 10 litre capacity and including flush pipe PVC of necessary height complete all as directed.

S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&f in repairs of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L in repair Cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L in repair Cast iron Nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

BLANK

S & F in repairs 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F in repairs 75 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers or any other minor accesories etc complete all as specified and directed

Petty repairs to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush all as directed

Supply only jumper brass with rubber or leather washer complete for 20 mm dia stop cockbrass complete all as specified and directed.

Supply only jumper brass with rubber or leather washer complete for 15 mm dia bib cock/stop cockbrass complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm each complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from the frames)n exc 1.5.Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description but exc 1 Sqm each and not exc 2 Sqm each complete all as specified and directed.

M&L for second class hard wood plain, solid, straight chowkats & frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints.

M&L Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type C1 (1:3:6) using 20 mm graded aggregate complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick Plain, framed, panelled shutters of factory made (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F 2nd class hard wood 35mm thick glazed and skelton shutters ( factory made)of open rebated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rounded fitted with cut and beads for sccuring glass, gauge etc size of shutters as specified in SSR Part-I section & clause 8.20(a)..complete all as specified and directed

S & F opening solid PVC door frame of size 50mm X 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed shet all as specified & shown on drawing SSR Part II 2010 complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheet for top tail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing the frame at site as in repairs all as per specification & drawings given in SSR 2010 Part II all as specified and directed.

S&F 100 mm long stainless steel butt hings medium weight complete all as specified and directed.

S & F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge

S/F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs grating fixed in repair 150mm dia complete all as specified and directed

S & F 30 mm thick Glazed and skelton shutters,in window, ventilators open rebeted and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for scuring glass etc; Sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (b) complete all as specified and directed.

M&L preparation of new wooden surfaces of any description and apply two coat of synthetic enamel paint over a coat of pink primer not other wise described over 10 cm width or girth complete all as specified and directed

S & F 75mm long butt hings medium weight cold rolled mild steel & fixed to chowkats all as specified.

S & F aluminium bow handles, cast type, anodised size 100 mm complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed complete all as specified and directed.

S&F in repairs 150 mm long, gate and shutter, hooks and eyes aluminium plate type-II complete all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete all as specified and directed.

M&L preparation of new surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth over steel surfaces surfaces.

S & F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluninium wire stables complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joint, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 20mm thick plaster in cement mortar (1:4) in two coats (15mm thick backing coat and 5 mm thick finishing coat) on fair faces of brick work or concrete surfaces mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed.for buildings upto and including 4 storeys :- NOTE: WPC shall be measured and paid separately

M & L for rendering 15mm thick plaster in CM (1:6), on fair faces of brick work or concrete surfaces, finished the surfaces smooth, with using extra cement complete all as specified and directed.

M & L for rendering 5mm thick plaster in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even and smooth (without using extra cement), complete all as specified and directed.

M & L for rendering 10mm thick plaster in CM (1:3), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufactures instructions but not less than 3% by weight of cement complete all as specified and directed

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

M & L preperation of newly plastered or previously untreated surfaces of wall and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algea (Antifungal) paint over one coat of primer all as specified and directed

M & L preparing old decorated surfaces of ceilings and applying two coats of white wash complete all as specified and directed.

M & L for preparing surfaces, plastered or unplastered old surfaces of walls applying one coat of oil bound distemper (OBD) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubish off the premised out side M.D. land all as specified.

M & L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed (light shade).

M & L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick rendering in CM 1:4 to recieve tiles complete all as specified and directed (light shade).

S & F Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed.

S&F White Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:6) on fair face of brick or concrete surface complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat of plaster in CM(1:4) complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

S&F in repairs12mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on one face; fixed with screws to timber frame work complete all as specified and directed.

S&F in repair magic eye as per existing design. Complete all as specified and as directed

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

M&L IInd class hardwood exc 6 and nexc 13 sqcm plain fillets square, rectangular in section, clean sawn & wrought , secured with nails or brads etc complete all as specified and directed.

Taking up or down steel tubing & connections of 15mm bore complete all as specified and directed.

Taking up or down steel tubing & connections of 20mm bore complete all as specified and directed.

Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as specified and directed.

Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore complete all as specified and directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore all as specified.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore all as specified.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed

S & F in repairs Curtain rails alumnium alloy with fixing backets, stops, rollers etc., all as specified and directed.

S&F in repair wash basin, vitreous china, white flat back, size 580 x 450 mm including brakets, pillar tap, cast copper alloy, 15 mm bore capstain heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts, PVC waste pipe and 32 mm dia chromium plated cast copper alloy waste coupling all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors.complete all as specified and directed

M & L PCC 1 :2 :4 type B1 (using 20 mm graded store aggregate), 40 mm thick in flooring finishing cement concrete surfaces finished even and smooth without using extra cement all as specified.

Glass dividing strips inserting in cement mortar 3 mm thick and 38 mm width complete all as specified and directed

S & F in repairs 110 mm dia, PVC bend complete all as specified and directed

S & F in repairs 110 mm dia PVC (SWR) shoe complete all as specified and directed

S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia complete all as specified and directed

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia complete all as specified and directed

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

S&F Polish kota stone/machine cut slab thick 20 mm thick machine cut in skirting, window cills & jambs, steps etc jointing and pointing with white cement slurry including cutting and polishing and 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

S & F in repairs of aluminium window/ventilator/door in lieu of wooden made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, Star lock, hooks & eyes peg stays, rubber beading and handles including connected items with and including, complete all as specified and directed. NOTE :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

S&F in repairs star lock for window incl all necessary fittings complete all as specified and direced.

S&F in repairs 4mm thick plain sheet glass of ordinary quality for aluminium windows including rubber beading etc all as directed and specified.

S&F in repairs aluminium anodised grill and frame of approved make and pattern of 10mm thick fixed including F frame for aluminium windows all as directed and all as specified.

S & F Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and directed.

S&F in repairs door closer hydraulically regulated designation no-3 universal type aluminium extruded section suitable for door 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete as specified and directed.

S&F in repairs of waste coupling with waste pipe of PTMT (half or Full threaded) minimum weight 40mm-60 gms complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Refixing shutter in same opeining of any description n exc 1 sqm each complete all as specified and directed.

Refixing shutter in same opeining of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S & F Framed work such as grills, gratings, open dran cover etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer

M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

M&L for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit(2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

Replacement of Steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.

M&L for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

M&L for Providing and applying water tight jacketing around columns with M20 grade micro concrete including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Make or brand Micro concrete of Dr. Fixit, Shalicrete URP of STP Ltd. , Epibond-21-LP, EPCO -KP-HP-250 of Krishna Conchem Note: Reinforcement shall be measured and paid separately.

VARDHAMAN CONSTRUCTION COMPANY

Mahadev Enterprises

Everest Construction

M/s S.D Construction Co

Sagar Electricals

M/s C S Construction Company

INDIA ENGINEERS AND CONTRACTORS