8121/SAR-29/E8 REPAIR/REPLACEMENT/MAINT OF INTERNAL ELECTRIC WIRING, LIGHT FITTINGS AND FIXTURES IN TECHNICAL AREA AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down carefully point wiring any type of copper / aluminium light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push, bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc. as existing complete all as specified and as directed.

Taking down tube light fittings / bulk head fittings / light fittings /any type light/LED fitting retrieved from Srl item No 1 here-in-before and kept in safe custody for re-use the serviceable fittings complete all as specifed and directed.

M & L for Point wiring with 1.5 Sqmm copper conductor cables (multistranded) FRLS PVC insulated and unsheathed in and including concealed PVC conduit of (ISI marked) 25mm dia including continuous earth wire with 1.5 Sqmm copper conductor (multistranded) FRLS PVC insulated and unsheathed cable connected to earth dolly complete all as specified conforming to IS-694 including 2 mm thick Ms sheet Metal box with earth dolly including 3 mm thick ISI marked, plastic laminated sheet for mounting switches and socket etc all concealed including finishing the disturb plaster surface for one light/fan point controlled by one way switch complete all as specified and as directed.

All as per item No. 3 here in before but for one 3 pin socket outlet 5/6 Amps on the same board with other switches.

All as per item No. 3 here in before but for one 3 pin socket outlet 5/6 Amps on independent board.

All as per item No. 3 here in before but for one call bell point controlled by one switch.

M & L Point wiring with 2.5 Sqmm copper conductor cables (multistranded) FRLS PVC insulated and unsheathed in and including concealed PVC conduit of (ISI marked) 25mm dia for one 5 pin socket outlet 15 Amps on independent board controlled by one, one way switch including continuous 2.5 Sqmm copper conductor (multistranded) FRLS PVC insulated and unsheathed cable connected to earth dolly including finishing the disturb surface complete all as specified and as directed complete all as specified conforming to IS-694.

All as per item No. 7 here in beforebut for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) FRLS PVC insulated and unsheathed cable and 4 sqmm copper (multistrand) FRLS PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm including finishing the disturb surface to meet the existing surface complete all as specified and as directed complete all as specified.

S&F switch piano flush button type, 5/6 Amp, single pole one way complete all as specifed and directed.

S&F Modular switch 1 way 6A, 1 module, complete all as specifed and as directed.

S&F socket outlet 2 in 1 , 5 pin , 5/6 A complete all as specifed and as directed.

S&F Modular socket 6A -2/3 pin combined 2 module, complete all as specifed and directed.

S&F switch piano flush type single pole 15/16 Amp complete all as specifed and directed.

S&F Modular switch 1 way 16A, 1 module, complete all as specifed and as directed.

S&F Socket outlet 2 in 1, 6 pin, 5/6 & 15/16 Amps flush type complete all as specifed and as directed.

S&F Modular socket 6A /16A-2 / 3 pin combined 2 module complete all as specifed and directed.

S&F Electronic fan regulator flush mounting 300-400 Watts switch size having 4 step to regulate/ control speed of ceiling fan complete all as specifed and as directed.

S&F White cover plate with frame,3 module complete all as specified and directed.

S&F White cover plate with frame,4 module complete all as specified and directed.

S&F White cover plate with frame,6 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F Metal flush box 4 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

S&F batten holder pin type, brass ring with PVC body ISI marked complete all as specified and as directed. Make : Anchor/Havells/SSK/Indoasian

S&F LED Lamp 9 watt, Syska SSK,SRL BASE B22 Complete all as specifed & directed

S&F modular bell push flush type 6 Amp 1 module, complete all as specifed and directed. Make:- Make:- Model Arteor Legrand,Chiron ABB,Ulti Schneider /indoasian/havells

S&F bell push flush type 5 Amp, complete all as specifed and directed. Make:- Model Penta PC Anchor, Havells Rio, SSK Topline/Indo asian

S&F call bell ding-dong, AC, 230 volts, single pole complete all as specifed and directed. Make:- Anchor, Havells, SSK

S&F 9/10 Watt LED Bulk head fittings complete IP 66 with IK 09 protection, High Presure die cast aluminium housing and milky diffuser single phase 230V with 3 year warranty all as specified and directed. Make : Philips, Wipro, Osram

S&F Ceiling rose, PVC / Polycarbonate 65mm x 50 mm size three terminals, ISI Marked complete all as specifed and directed. Make:- Acnhor,Havells,SSK Indo asian

S&F Recess mounting 36/40 watt LED light of size 2x2 feet slim ceiling light with extruded aluminium housing powder coated, milky diffuser, operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100lm/W,CRI>80, integrated constant current electronic driver with3 year warranty complete all as specified and directed.

S&F LED batten light fitting of 20 WATT MAKE-SURYA-VISCO-CAT NO-SLE BT 20IL complete all as specifed& directed

S&F LED batten light fitting of 10 WATT MAKE-SURYA-ARROW-CAT NO-SLE BT 9W ARROW complete all as specifed & directed

S&F Surface mounting 18/20 watt LED light of size 1x1 feet slim ceiling light with extruded aluminium housing powder coated, milky diffuser, operating voltage 140V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100lm/W,CRI>80, integrated constant current electronic driver with 2 year warranty complete all as specified and directed.

S&F Downlight 05 watt make SYSKA LED -cat no-SSK-PAD-0502 or equivelent all complete all as specifed and directed

S&F single pole and neutral enclosure with a two pin and earth plug and socket with MCB 20 AMB CAPACITY 'C' CURV, 10KA 240 VOLT SUITABLY fixed in a weather proof metal enclosure complete all as specified and directed by the Engr-in-charge. Make : - Anchor, Havells, SSK/Indo asian

S&F Double door three phase Vertical distribution board 4 way made out of CRCA sheets 1.6 mm thick, phosphatised powder coated with copper Bus Bar 200 Amps, 415 V, Earth Stud, Din Rail, Polymide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box ,ground terminal blocks ,duly prewired with thimbled flame retardant copper conductors and poly layer for protection including taking down old existing complete all as specified and directed. Make - Legrand, Schinder,ABB and Seimens/Indo asian Note :- Cost of incomer MCCB 4 pole 100 Amp 16KA rating is inclusive in quoted rate and MCB in outgoing to be measured separetly under respective itmes.

S&F MCB single pole of 6 to 40 Amp capacity, 'C' curve,10KA, 240 volt complete all as specified and directed. Make:- Legrand, Schinder,ABB and Seimens.

S&F MCB single pole & neutral, up to 63 Amp capacity,'C' curve,10KA, 240 volt complete all as specified. Make:- Legrand, Schinder,ABB and Seimens.

S&F isolator 4 pole 63 Amps complete all as specified and directed. Make:- Legrand, Schinder,ABB and Seimens.

S&F Sheet metal enclosure factory made shutter type double door distribution board 12 way (when MCBs are to be used) single pole and neutral, 240 Volts, with 200 Amp rated busbar, IP 43/IK09 (MCBs are to be measured & paid separately) complete all as specified and directed. Make:- Legrand, Schinder and Seimens.

S & F in repair submain wiring with two single core 6 sq mm FRLS PVC insulated, unsheathed, cable 1100V grade heavy duty, copper conductor multistranded, drawn in PVC conduit, medium grade, 25 mm bore having 2mm wall thickness including one single core FRLS PVC insulated copper cable multistranded of size 6 sq mm as earth wire fix to wall etc including finishing the disturb complete all as specified and as directed. Make of conduit :- AKG,Finolex,Polycab and Make of wire:- Havells, RR kable, Grandlay,KEI Note:- Connection of wire with switch, socket and DBs should be done through thimble (lugs) only.

S & F in replacement of Sheet metal enclosure factory made shutter type for souble door distribution board 08 WAY (when MCBs are to be used) single pole and neutral, 240 Volts, with 200 Amp rated busbar, IP 43/IK09 (MCBs are to be measured & paid separately) complete all as specified and directed.

S&F Three pin and earth plug with socket 32 amp 415 volt with metal encloser as complete specifed and directed

M&L for flame proof sub main wiring with 4 x 6.00 Sqmm FRLS PVC insulated copper cable in ERW steel conduit with earthwire of 6 Sqmm of FRLS PVC insulated copper cable unsheathed(multistrand) conductor including taking down old existing wiring cable complete all as specified and directed.

S&F RCCB/ELCB 63 Amp 415 volt,30-300mA 04 pole sensitivity,10kA complete all as specifed and directed

S&F RCCB /ELCB40 Amp 415 volt,30-300mA 04 pole sensitivity,10kA complete all as specifed and directed

S&F Sheet metal enclosure suitable for fixing of RCCB 63 amp 415 volt four pole at Exiciting fedder piller complete all as specified and directed.

Supply only 25 mt long 2.5 cm wide and at least 0.125mm wall thickness PVC insulated tape of good quality all as specified and directed. Make:- Steelgrip, Havells, Kalinga, Kinjal

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade FRLS electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduit fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light /fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire FRLS PVC insulated unsheathed 1100v grade cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly includig taking down old existing wiring and make good the disturbed surface complete all as specified and directed by Engrs-in-Charge.

Supply and fixing flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 10 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc all as specified and directed. Make : Flexpr/Sudhir/Baliga/Shyam.

Supply and fix in replacement with Flame proof LED light fitting. 2x16/20W flameproof type CMRI Certifed ,Recommended for Gas/Vapour Group ofIIA & IIB and Zone 1& IP 65 Protection. made of aluminium alloy LM6, cat part no-EXTN2LTB-16/20 make-Crompton or Equiltent etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Note (For item No 50 to 51) :- (a) All fittings shall be ISI marked and shall have approval of CIMFR Dhanbad. (b) Original Test certificate of Manufacturer as well as copy of Excise duty Gate pass shall be produced by Contractor without which payment shall not be allowed. (c) For Ser. NO. 51- (1) Lumens efficiency of fitting shall be minimum 90 lumens/watt. (2) PF shall be minimum 0.9. (3) LED luminaries & Driver shall be of same make. (4) THD shall be maximum 20%.

M&L for earthing with galvanised steel earth plate electrode 60cmx60cmx6mm thick surrounded by charcoal & salt buried directly in ground (earth pit not less than 2.25m below ground level) with top edge of the earth plate not less than 1.5m below normal ground level, connected to and including GI wire of size 4mm as earthing lead upto 7.5m length by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I, 2009 connected to earthing test point/ transformer/ panel and testing on completion including necessary excavation, returning filling, disposal of surplus soil upto 50m lead in any type of soil, funnel, PCC chamber (1:3:6) type C-1, RCC pit cover, charcoal, salt including provision of earth lead protected by 15 mm dia medium grade GI pipe (ISI marked), upto 7.5m length and 120mm dia medium grade GI pipe (ISI marked) for watering inluding dismantling and taking out old existing earthing materials complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to pole or any other indicated situation for loop earthing etc as required with 4mm galvanised iron wire inclung taking out old existing complete all as specified and directed.

Ish Engineers and Contractors

Baliyan Electrical Works

NAQLI LAL SHARMA AND ARUN SHARMA

MAHADEV ELECTRICALS

S C BUILDERS