Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC 496665 | RAIGARH | CHHATTISGARH | 496665 | L1 | Accepted-AOC L1 and all documents as per NIT | |
| 2 | Rejected-Technical | - | Rejected-Technical documents not evaluated | |
| 3 | Rejected-Technical AT JARIDIH BAZAR DIST BOKARO JHARKHAND | JARIDIH BAZAR | BOKARO | JHARKHAND | 829114 | - | Rejected-Technical documents not evaluated |
Tender Value
₹2.2 L
EMD Value
₹2,800
Closing Date
25 Jun 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PE ENM
KGOCP
Repair maintenance of 220V 2 wire overhead line for lighting along the public road near 3 no rath mandir from 1 no quarry and Reorganization of 220 V OH line near mahila mandal in respect to Kargali OCP.
2024_CCL_310566_3
CCL/BnK/Kargali/EnM/24-25/04
Open Tender
Electrical and Maintenance Works
Item Rate
10 days
KGOCP
AS PER NIT
2 documents required · 2 mandatory
₹2,800
21 Jun 2025
15 Jun 2024
26 Jun 2024
15 Jun 2024
25 Jun 2024
15 Jun 2024
15 Jun 2024 - 19 Jun 2024
Amount
Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamp, bolts, nuts etc. as required.
Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required
Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required
Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Transportation of pole to site
Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required
Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required
Supply and providing of 6 SWG GI wire
Erection of GI wire no 8 SWG including binding etc as required
Erection of cradle guard as required.
Clearing jungle including uprooting of rank vegetation, grass, Brush wood, trees and saplings of girth upto 30cm measured at a height of 1M above ground level and removal of rubbish upto a distance of 50M outside the periphery of the area cleared.
Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required - 2x1.5 sq mm
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work
Painting with aluminium paint of approved brand and manufacture to give an even shade
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade
Lettering with black Japan paint of approved brand and manufacture (8 cm height)
Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand • 6 graded stone aggregate 20 mm nominal size) of specified size and shape including form work, plastering if specified size and shape including form work, plastering if required, curing etc as required.
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
Erection of light fitting on pole
Total impact of GST for the purpose of CTC
NATIONAL ELECTRICAL WORKS
CITY ELECTRICALS
techsummary_321802.pdf
PDF • 0.60 MB
finsummary_321802.pdf
PDF • 0.60 MB
wu4.pdf
PDF • 0.60 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .