Construction of camp office cum officers Rest House (G+3 Story) at Gomtinagar station and renovation of existing Construction offices/stores at Lucknow under Lucknow Division of North Eastern Railway.

A-CPWD-DSR-2021 Items

B-CPWD-Harticulture-2020

C-Non Schedule Items

Item Breakup - A-CPWD-DSR-2021 Items

nuts complete. ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) 9.104 Providing and fixing aluminium tee channels Metre 250 139.7 34925 22 (heavy duty) with rollers & stop end in pelmets as curtain rod. 9.105S GYPSUM BOARD PARTITIONS 9.121 Providing and fixing Fiber Glass Reinforced Metre 66 702.6 46371.6 plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated 23 polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 9.122 Providing and fixing to existing door frames. 9.122.2 30 mm thick Fiberglass Reinforced Plastic Sqm 19 3963.7 75310.3 (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required 24 places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. CAO-C-NER-ENGG/NORTH EASTERN RLY Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size 9.147D for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147D.2 Three track three panels sliding window Sqm 45 10030.3 451363.5 with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 25 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.147D.4 Three track three panels sliding window Sqm 145 9642.6 1398177 with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 26 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.172 Providing and fixing stainless steel soft Set 50 749.7 37485 closing heavy type telescopic drawer 27 channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. CAO-C-NER-ENGG/NORTH EASTERN RLY 9.173 Providing and fixing ready made 304 grade Kg 250 423.7 105925 stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with 28 necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 9.174 Providing and fixing 2mm thick 16 to 19mm Metre 500 38.45 19225 wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters 29 including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- charge. Total 5664911.10 All the item as per attached Annexure-A8 based on CPWD-DSR-2021 and any other items not Item- 8 included in this annexure but provided in Chapter-10 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 10.0 STEEL WORK 10.3 Providing and fixing in position collapsible Sqm 22 9397.35 206741.7 steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and 1 bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the 10.5 junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6 mm for diagonal Sqm 26 4781.15 124309.9 2 braces 10.28 Providing and fixing stainless steel ( Grade Kg 1650 612.25 1010212.5 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel 3 dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Providing & fixing glass panes with putty 10.30 and glazing clips in steel doors, windows, clerestory windows, all complete with : CAO-C-NER-ENGG/NORTH EASTERN RLY 10.30.2 5.5 mm thick glass panes (weight not less Sqm 135 1243.5 167872.5 4 than 12.50 kg/sqm) Total 1509136.60 All the item as per attached Annexure-A9 based on CPWD-DSR-2021 and any other items not Item- 9 included in this annexure but provided in Chapter-11 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 11.0 FLOORING 11.5 62 mm thick cement concrete flooring with Sqm 698 928.65 648197.7 concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 1 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 11.16S TILE FLOORING Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry 11.19 mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.19.2 Medium shade pigment using 50% white Sqm 154 1312.1 202063.4 2 cement, 50% ordinary cement 11.33S WOODEN FLOORING 25 mm wooden planking, tongued and 11.33 grooved in flooring, including fixing with iron screws complete with : 3 11.33.2 Second class deodar wood Sqm 433 2800.1 1212443.3 11.37S CERAMIC GLAZED TILES 11.40 Providing and laying rectified Glazed Sqm 253 1225.1 309950.3 Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume 4 Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of 11.47 steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 5 11.47.2 Size of Tile 600x600 mm Sqm 2253 1676.15 3776365.95 6 11.47.4 Size of Tile 1000x1000 mm Sqm 635 2814.4 1787144 CAO-C-NER-ENGG/NORTH EASTERN RLY Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired 11.48 shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 7 11.48.2 Size of Tile 600x600 mm Sqm 253 258.65 65438.45 8 11.48.4 Size of Tile 1000x1000 mm Sqm 635 146.6 93091 Total 8094694.10 All the item as per attached Annexure-A10 based on CPWD-DSR-2021 and any other items not Item- 10 included in this annexure but provided in Chapter-12 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING 12.1S SHEET ROOFING Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of 12.19 integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: 12.19.1 With common burnt clay F.P.S. (non Sqm 578 549.05 317350.9 1 modular) brick tiles of class designation 10 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), 12.21 including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 2 12.21.1 In 75x75 mm deep chase Metre 111 260.2 28882.2 12.22 Making khurras 45x45 cm with average Each 8 266.6 2132.8 minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal 3 size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Total 348365.90 All the item as per attached Annexure-A11 based on CPWD-DSR-2021 and any other items not Item- 11 included in this annexure but provided in Chapter-13 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 5041 294.35 1483818.35 13.44S EXTERIOR FINISHING Finishing walls with textured exterior paint 13.45 of required shade : 13.45.1 New work (Two or more coats applied @ Sqm 300 245 73500 3.28 ltr/10 sqm) over and including priming 2 coat of exterior primer applied @ 2.20kg/10 sqm Finishing walls with Premium Acrylic Smooth 13.47 exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ Sqm 3321 162.35 539164.35 1.43 ltr/10 sqm over and including priming 3 coat of exterior primer applied @ 2.20 kg/10 sqm) CAO-C-NER-ENGG/NORTH EASTERN RLY Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 4426 158.95 703512.7 4 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.3 Painting Steel work with Deluxe Multi Sqm 114.6 140.05 16049.73 Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over 5 an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Wall painting with acrylic emulsion paint of 13.60 approved brand and manufacture to give an even shade : 6 13.60.1 Two or more coats on new work Sqm 7000 137.85 964950 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal 13.73 of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 7 13.73.2 20 mm wide and 15 mm deep groove Metre 498 63.1 31423.8 13.80 Providing and applying white cement based Sqm 8047 123.85 996620.95 putty of average thickness 1 mm, of 8 approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Applying priming coats with primer of approved brand and manufacture, having 13.85 low VOC (Volatile Organic Compound ) content. 13.116 Polishing in high gloss/matt finish melamine Sqm 317 1156.55 366626.35 clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat 9 to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Total 5175666.23 CAO-C-NER-ENGG/NORTH EASTERN RLY All the item as per attached Annexure-A12 based on CPWD-DSR-2021 and any other items not Item- 12 included in this annexure but provided in Chapter-14 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 14.0 REPAIRS TO BUILDING 14.72S FINISHING 14.72 Providing and fixing double scaffolding Sqm 189 285 53865 system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there 1 after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 14.75AS ROUTINE MAINTENANCE WORK 14.87 Providing and laying in situ five course Sqm 483 454.8 219668.4 water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 2 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). Total 273533.40 All the item as per attached Annexure-A13 based on CPWD-DSR-2021 and any other items not Item- 13 included in this annexure but provided in Chapter-16 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.42S CONCRETE PAVEMENTS 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse cum 41 7399.2 303367.2 sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required 1 slope and camber in panels as required including consolidation finishing and tamping complete. CAO-C-NER-ENGG/NORTH EASTERN RLY Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to 16.43 required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.2 Cement concrete manufactured in cum 83 10006.65 830551.95 2 automatic batching plant (RMC plant) i/c transportation to site in transit mixer 16.44 Extra for providing and mixing hardening Litre 561 48.15 27012.15 compound of approved quality as per 3 manufacturer's specification in cement concrete. 16.45 Providing and fixing in pre-moulded joint per cm 690 4.7 3243 filler in expansion joints of RCC roads / CC depth pavements after making the joints dust free per cm with high pressure air jet cleaners, all width complete as per direction of the Engineer- per 4 in-Charge. (Pre-moulded joint fillers shall be metre made of bitumen hot sealing compound length impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 16.49S MISCELLANEOUS 16.69 Providing and laying at or near ground level cum 28 8613.55 241179.4 factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except 5 at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads 16.78 & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.2 With material conforming to Grade-II (size cum 83 2775.65 230378.95 6 range 53 mm to 0.075 mm ) having CBR Value-25 CAO-C-NER-ENGG/NORTH EASTERN RLY 16.89 Providing and laying matt finished vitrified Sqm 154 1250.75 192615.5 tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi 7 modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting 16.91 and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.2 80 mm thick C.C. paver block of M-30 grade Sqm 407 1011.2 411558.4 8 with approved color design and pattern. Total 2239906.55 All the item as per attached Annexure-A14 based on CPWD-DSR-2021 and any other items not Item- 14 included in this annexure but provided in Chapter-17 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and 17.5 clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. Each 4 10128.3 40513.2 1 automatic flushing cistern 17.7A Providing and fixing wash basin with C.I. Each 15 3459.05 51885.75 brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, 2 cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 17.10 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board CAO-C-NER-ENGG/NORTH EASTERN RLY 3 17.10.1.2 510x1040 mm bowl depth 225 mm Each 3 6677.4 20032.2 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 15 299.35 4490.25 with flexible tube upto 1 metre long with 4 S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 5 17.28.2.2 40 mm dia Each 18 104.35 1878.3 17.29 Providing and fixing 100 mm sand cast Iron Each 60 45.25 2715 6 grating for gully trap. Providing and fixing mirror of superior glass (of approved quality) and of required shape 17.32 and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 7 17.32.4 Rectangular shape 1500x450 mm Each 15 1817.2 27258 17.33 Providing and fixing 600x120x5 mm glass Each 15 942.15 14132.25 shelf with edges round off, supported on anodised aluminium angle frame with C.P. 8 brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.34 Providing and fixing toilet paper holder : 9 17.34.1 C.P. brass Each 15 680.8 10212 Providing and fixing soil, waste and vent 17.35 pipes : 17.35.1 100 mm dia 10 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 840 1018.05 855162 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 17.37 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 11 17.37.1 For 100 mm dia pipe Each 70 308.45 21591.5 Providing and fixing plain bend of required 17.39 degree. 17.39.1 100 mm dia 12 17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 160 439.75 70360 Providing and fixing double equal plain 17.42 junction of required degree. 17.42.1 100x100x100x100 mm 13 17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 60 881.25 52875 Providing and fixing shielded coupling for 17.57A Hubless centrifugally cast iron pipe Providing and fixing M.S. stays and clamps 17.59 for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 14 17.59.1 100 mm Each 80 128.65 10292 Providing and fixing trap of self cleansing design with screwed down or hinged grating 17.60 with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.1 100 mm inlet and 100 mm outlet 15 17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 48 1604.1 76996.8 CAO-C-NER-ENGG/NORTH EASTERN RLY Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel 17.65 paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 16 17.65.1 100 mm diameter pipe Metre 620 69.55 43121 17.78 Providing and fixing white vitreous china Each 15 13036.55 195548.25 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous 17 china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 17.80 Providing and fixing white vitreous china Each 4 7004.45 28017.8 battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 18 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Total 1527081.30 All the item as per attached Annexure-A15 based on CPWD-DSR-2021 and any other items not Item- 15 included in this annexure but provided in Chapter-18 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 1 18.7.3 25 mm nominal dia Pipes Metre 360 408.55 147078 2 18.7.5 40 mm nominal dia Pipes Metre 250 674.35 168587.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 3 18.8.1 15 mm nominal dia Pipes Metre 450 441.15 198517.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 4 18.17.3 40 mm nominal bore Each 20 707.3 14146 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : CAO-C-NER-ENGG/NORTH EASTERN RLY 5 18.18.3 25 mm nominal bore Each 30 399.15 11974.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 6000 9.7 58200 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 6 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib cock of approved quality conforming to 18.51 IS standards and weighing not less than 690 gms. 7 18.51.1 15 mm nominal bore Each 36 708.4 25502.4 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 8 18.52.1 15 mm nominal bore Each 36 594.75 21411 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 9 18.53.1 15mm nominal bore Each 36 500.35 18012.6 Total 663429.50 All the item as per attached Annexure-A16 based on CPWD-DSR-2021 and any other items not Item- 16 included in this annexure but provided in Chapter-19 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), 19.7 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non Each 8 11687.1 93496.8 1 modular) bricks of class designation 7.5 Providing and fixing in position pre-cast 19.19 R.C.C. manhole cover and frame of required shape and approved quality Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in 19.28 cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With common burnt clay F.P.S. (non Each 7 6258.2 43807.4 2 modular) bricks of class designation 7.5 CAO-C-NER-ENGG/NORTH EASTERN RLY Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 19.30 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 mix(1Cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm 19.30.1 deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non Each 10 6431.3 64313 3 modular) bricks of class designation 7.5 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non Each 5 28029.15 140145.75 4 modular) bricks of class designation 7.5 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement 19.34 mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 5 19.34.1 100 mm dia Each 46 378.45 17408.7 Total 359171.65 All the item as per attached Annexure-A17 based on CPWD-DSR-2021 and any other items not Item- 17 included in this annexure but provided in Chapter-21 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : CAO-C-NER-ENGG/NORTH EASTERN RLY Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, 21.4 including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum Each 4 2448.85 9795.4 1 1.25 mm thickness 21.18 Providing and fixing 12 mm thick frameless Sqm 23 4540.7 104436.1 toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing 2 arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc.to be paid separately). Total 114231.50 All the item as per attached Annexure-A18 based on CPWD-DSR-2021 and any other items not Item- 18 included in this annexure but provided in Chapter-22 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.5 Providing and laying water proofing Sqm 591 516.6 305310.6 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) 1 Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. CAO-C-NER-ENGG/NORTH EASTERN RLY 22.6 Providing and laying water proofing Sqm 240 585.55 140532 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of 2 slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. Total 445842.60 All the item as per attached Annexure-A19 based on CPWD-DSR-2021 and any other items not Item- 19 included in this annexure but provided in Chapter-25 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount STRUCTURAL GLAZING ALUMINIUM 25.0 COMPOSITE PANEL 25.8 Design supply & installation of suspended Sqm 56 8230.05 460882.8 Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and 1 approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. CAO-C-NER-ENGG/NORTH EASTERN RLY Total 460882.80 All the item as per attached Annexure-A20 based on CPWD-DSR-2021 and any other items not Item- 20 included in this annexure but provided in Chapter-26 of CPWD-DSR-2021 with up to date correction slips. S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in 26.6E cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 1 26.6E.1 9mm thickness Sqm 200 4459.7 891940 2 26.6E.2 12mm thickness Sqm 299 5095.05 1523419.95 26.10 Providing and fixing factory made Kitchen Sqm 89 4767.8 424334.2 Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed 3 edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. CAO-C-NER-ENGG/NORTH EASTERN RLY Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance greater than or equal to 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel 26.27 item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main T. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T- sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge 26.27.2 With 20 mm thick beveled tegular mineral Sqm 395 2362.1 933029.5 4 fibre false ceiling tile (NRC 0.7) 26.73S PREFAB/PRECAST TECHNOLOGY 26.91 Providing and fixing factory made 18 mm Sqm 177 3136.65 555187.05 thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive 5 strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. CAO-C-NER-ENGG/NORTH EASTERN RLY Total 4327910.70

Item Breakup - B-CPWD-Harticulture-2020

Item Breakup - C-Non Schedule Items

Supply of Manpower Carpenter 1st class

Carpenter 2nd class

Security guard without gun (8 hours shift Day duty per day)

Beldar (Unskilled) Total 3539400.00 Over all percentage Above/Below/At par over the basic rates of item under Annexure C-II of Item- 23 Schedule-C. S No. Item No Description of Item Unit Qty Rate Amount

Supply of Materials 12 mm thick fire Sqm retardant plywood conforming to IS: 5509

1.0 mm thick decorative laminated sheet

Brass tower bolt (barrel type) 250x10 mm

Brass flush bolt 250 mm

Brass handles 125 mm with plate 175x32 Each mm

Brass butt hinges (heavy type) :75x65x4.0 10 Nos. mm (weighing not less than 0.20 kg)

Brass door latch 300x16x5 mmweighing not Each less than 0.380 kg

Brass door latch 300x16x5 mmweighing not Each less than 0.380 kg

100 Brass screws 50 mm Nos.

Float glass panes of nominal thickness 5 Sqm mm (weight not less than 12.50 kg/sqm)

Factory made prelaminated PVC rigid foam Sqm sheet 5 mm thick

Fibre glass cloth Total 2930117.00 Over all percentage Above/Below/At par over the basic rates of item under Annexure C-III of Item- 24 Schedule-C. S No. Item No Description of Item Unit Qty Rate Amount CAO-C-NER-ENGG/NORTH EASTERN RLY

Supplying and fixing of following sizes of Metre medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm Total 58000.00 Over all percentage Above/Below/At par over the basic rates of item under Annexure C-IV of Item- 25 Schedule-C. S No. Item No Description of Item Unit Qty Rate Amount

Providing and fixing 3 MTM frosted film Sqm glass; Hift shalt. The film are permanent pressure-sensitive films have a transparent synthetic liner in a dusted crystal finish in translucent white (2 mil) or translucent frosted crvstal finish (3.8 mil) in five colors. all complete as-pre relevant architectural drawings and specification The rates include all Materials, necessary accessories, labor, tools and plants. Nothing shall be paid extra for this items.

Provinding and Fixing of Window Blind With Sqm Roller and Other accessories, The rates include all Materials, necessary accessories, labor, tools and plants. Nothing shall be paid extra for this items.

Providing and fixing of wall panelling on grid Sqm made of PVC profile section of size 21mm x 17mm x 1.5 mm filled with UPVC profile section of size 150mm x 10mm x 1.0mm. The edge and periphery covered by extruded PVC beeding of section 28mm x 12mm x 1.0mm complete job including fixing with screws, dash fasteners and other accessories as required

Providing and fixing bright /matt finished Each Stainless Steel handles of size 25mm x 450mm H Handle approved quality & make with necessary screws etc all complete. Total 2040529.80