SDI of sub PM and other elec_mech equipments etc including allied works for Bara Mallikpur Mini Piped WS Scheme Block Dhaniakhali Dist Hooghly under JJM Program under ED PHED

Amount

PART-A Supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump. Duty Condition : 7.5 cu. mtr. Head : 53 mtr. Motor : Submersible type 3 Ph. 50 Hz. 400V + 10%, DOL Impeller : GM/ SS/ Cromesteel/Noryal Motor winding : Wet Type. Pump outlet - 50/65/75/ mm. Make : KSB / Texmo / PLUGA / BG. (Test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.)

50 mm dia uPVC (Standard type) Column pipe with both side threaded and one side socketed, Make – Ashirbad / Aroma / Approved make 3.0 Mtr. Long .

1.5 Mtr. long .

50 mm diaTop and bottom adopter (CI)

Supply and delivery at site Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (H.Guru)

M.S. fabricated split type suitable tube well cover as per tube well housing with a necessary clamping arrangement with including holes for column pipe, air pipe and cable entry etc.

Safety device for the above pump set by suitable M.S. cage with clamping arrangement and nylon rope as per required length including supplying nuts, bolts and other necessary materials as per direction of E.I.C.

MS suspension clamp with necessary nuts, bolts & washer etc suitable for 50 mm dia column pipe (Size-300 mm x 50 mm x 6 mm each)

4 sq.mm. 3 core, 1.1KV grade PVC insulated & sheathed copper flat submersible cable as per IS. Make : Finolex / Havells / PolyCab / Currency

50 mm dia CIDF Non Return Valve conforming to I.S. : 5312, Part-I (P.N. 1.0),

50 mm dia CIDF sluice valve (PN-1.0) As per I.S 14846

50 mm dia heavy type MS black Pipes (For Common Delivery header Pump under Sl No-1, along with necessary bends, specials, fittings, viz. flanges, bolts, nuts, gaskets, MS Dismenteling joint, for connecting main pipe line etc. including providing MS/Brick/PCC support for laying of pipes & valves as reqd. to make the installation complete in all respect and as per NIT.

Supply & delivery of 415 V MCC cum PDB. with minimum 2mm thickness and degree of protection IP - 54, conforming to IS-8623 withsuitable Bus bar, Digital Voltmeter Ammeter, Contactor, delay timer, MCB, Valve Actuator starter etc. with PLC Logic & UPS as detailed in Annexure - I 5-7.5 HP with DOL (Star delta starter) Panel make : DIGITEK / RNR Industries / PCE Projects / OPG Power System / ECS. [TC / GC to be submitted along with panel after approval of detail power and control circuit drawing by EIC].

Supply & delivery at site of 10 KVA, 3 phase Oil cooled type servo motor operated wound line voltage corrector conforming to IS-9815 [Pt-I] 1994 suitable for unbalanced input voltage. Input voltage: 3 phase main supply phase to phase 250V-500V 3 servo motor in 3 phase with all protection by MCB (Make- ABB / Siemens/ L&T) Output voltage: 3 phase balanced output phase to phase 415V + 1% [Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / ECS/ Any approved make]. (Test certificate & warranty certificate should be submitted at the time of delivery)

Chlorination system with all equipment and accessories as per following specification :-i. 1no. Plunger type dosing pump of capacity 0-100 lit/hr. max. discharge and 10 Kg/cm². pressure max with Motor 0.5 HP, 1 Ph, 50Hz 220 Volt, 1440rpm TEFC cooling motor, base plate rate adjustment device etc.ii. 100lit HDPE dosing tank for storing of chlorine solution .iii. Necessary GI pipe fittings and HDPE / PVC pipe line for dosing the solution with all accessories as per requirment. Pump Make: Swelore/Positive Pump I/Any Approved make Motor Make- CGL/KEC/ABB/Any approved make

Supply & delivery of 16 sq. mm. 3 core PVC insulated Al. armoured cable (1.1 KV grade), IS 1554 (Part - I) / IS 7098 (Part-I) Make : INCAB / Gloster / NICCO / Polycab / Crystal.

Supply & delivery of 63 amp. 440 V, 50 Hz. TPN Main switch with rewireable type fuse link (Make: Havells / Standard)

Supply & delivery of 63 Amp. Industrial copper Busbar (Make Havells/Siemens)

Supply & delivery of 4 pole 63 Amp changeover unit (Make- Havells / Standard / ABB)

Supply & fitting fixing of 63 Amp. Kit kat (3 nos.) & 1no. Nutral link (Make : Havells) with required size wooden board mounted on wall.

Supply, delivery & fitting fixing of 48'' sweep 230 volt, 50 Hz, AC ceiling fan (Make : Havells/ CG/ Approved make) including fitting fixing on ceiling and making electrical connection complete.

Supply & delivery at site 2 nos. Plastic Chair & 1 no. Plastic Table (Make: Cello / Supreme / Nilkamal)

Installation and commissioning of Chlorinater and drawing of power line by supply of wire,earthing including brick foundation including net cement finish as per direction of EIC.

PART-B Installation of above Supplyed items in part-A (excluding Sl No.- 13) including cost of construction of foundation of chlorine machine, Valve support, out door light by the 40 mm dia G.I Arm, fabrication of M.S Structure, grouting, cost of welding, fitting fixing of new valves, and connecting to main delivery line througth underground pipe laying etc including supplying of all necessary metarials viz rubber gasket, nut & bolts, rubber mat of suitaible size & thikness including painting by synthetic enamel paint at part of rising main,valves etc after removing of old paint by scrapping & cleaning to complete the jobs in all respect as per tecnical specification and as per direction of E.I.C

Trial operation and guarding of whole installation as per departmental requirement and guideline 1 no. operator @ 404/- per day with 8.33% bonus. [As per existing Departmental Terms & Conditions]

Add: 18% GST

Add: 1% CESS

M.D.ENTERPRISE

PAYEL ENTERPRISE