Renewal Work with general repair of Bhognipur Ghatampur Chaudgara road Km. 22, 23, 24, 35(620), 36, 37, 38(300), 38(700), 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54(340) (By Departmental Hot Mix Plant)

Providing and laying dense graded bituminous macadam with batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.(Bitumen-VG-30) (By Departmental Hot Mix Plant)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Bitument VG-10) (By Departmental Hot Mix Plant)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Bitumen VG-30) (By Departmental Hot Mix Plant)

Construction of Sub-Grade and Earthen Shoulders with approved material obtained from distance borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Providing and Laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. Rates to be inclusive of all T&P/machine, material and labour required for proper complition of work. In centre line, side line, stop line, Zebra line, etc.

Please Enable Macros to View BoQ information