MAINTENANCE AND REPAIRS TO STREET LIGHTS/FLOOD LIGHTS/JUNCTION BOXES AND CONNECTED ITEMS IN TB-2 AREA AND DUNKRIK LINES UNDER AGE E/M-I AT GE (CENTRAL) KHADKI.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cables,pole foundation,stays etc and getting out in soft loose soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cables,pole foundation,stays etc getting out in soft disintegrated rock, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m width and not exc 3m in depth getting out in soft/ disintegrated rockl all as specified and as directed for pole foundation.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and as directed.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and as directed.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed. NOTE :- Mass concrete will be measured and paid as saperate item.

Material and labour for sand cushion in trenches for cable protection complete all as specified and as directed.

Supply and lay PCC cable cover class LV type I flat size 250mm x150mmx40mm complete all as specified and as directed.

Dismantling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from OH conductors / MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core with required aluminium cable lugs, heat shrink joints, Colour code heat shrink sleeves at both cable ends complete all as specified and as directed.

Description all as per item No. 12 above but 10sqmm 2 core complete.

Description all as per item No. 12 above but 16sqmm 2 core complete.

Description all as per item No. 12 above but 10sqmm 4 core complete all as specified

Description all as per item No. 12 above but 16sqmm 4 core complete all as specified

Description all as per item No. 12 above but 25 sqmm 3.5 core complete all as specified

Description all as per item No. 12 above but 35 sqmm 3.5 core complete all as specified

Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and kepping aside for refixing or carrying to store for credit, complete all as specified and as directed.

Material and labour for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long) complete all as specified and as directed.

Supply and fixing cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complte all as specified and directed including taking out old and unsv items carrying to store or for credit schedule, complete all as specified and as directed.

Supply and fix earth continuity wire using GI wire not less than 4mm dia on pole incl dismentling taking out unsv GI wire complete all as specified and as directed.

Dismantling and taking down old/unsv ACSR conductor any size complete for reuse at site or carrying to store for sch of credit all as specified and as directed.

Supply and fix ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection complete all as specified and as directed.

Painting of steel pole any type up to 7.5 mtr height above ground level including cross arms, clamps, stay clamps, brackets, swan neck etc with two coats of aluminium paint after surface preparation complete all as specified and as directed.

Numbering of LT poles serially with letter/number size width and height up to 40 mm in situ with black paint on white back ground complete all as specified and as directed.

Supply and fix GI tubing light grade 25 mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, complete all as specified and as directed.

Supply and fix GI tubing light grade 40mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, complete all as specified and as directed.

Supply only GI tubing light grade 50mm bore on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, ISI marked, for cable protection complete all as specified and as directed.

Supply and fixing GI pipe bracket with suitable clamps on existing pole made of MS flat 40x5mm and 40mm GI pipe (light grade) bend to 1.5 mtr in length& in any shape with all fixing arrangement, nuts, bolts and washers etc and incl 4 RM copper conductor cable multistranded size of 1.5Sqmm PVC wire from SMC Box to Street light fitting etc complete and all as directed by Engr-in-Charge and including dismantling the rusted/ broken U/S old one.

Supply and fix LED security fitting 45 watt with LEDs to shine evene brighter. the light also has an inbuilt surge protection IP 66 all as specified and directed incl dismentling taking down unsv fitting any type complete all as specified and as directed.

Supply and fix LED security fitting 60 watt with LEDs to shine evene brighter. the light also has an inbuilt surge protection IP 66 all as specified and directed incl dismentling taking down unsv fitting any type complete . NOTE :- The contractor must produce the IK10 and LM79 - LM80 test report of the batch of fittings before installation.

Supply and fix LED security fitting 90 watt with LED street light with aluminium PDC housing and toughened glass cover with IP 66 protection, secondary lenes for individual LED for roadways application including dismentling taking down unsv fitting any type complete all as specified and as directed.

Supply and fix LED security fitting 120 watt with LED street light with aluminium PDC housing and toughened glass cover with IP 66 protection, secondary lenes for individual LED for roadways application including dismentling taking down unsv fitting any type complete all as specified and as directed.

Supply and fix LED flood light fitting 80 watt with LED driver and lens complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and as directed.

Supply and fix LED flood light fitting 100 watt with LED driver and lens complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and as directed. NOTE :- The contractor must produce the IK10 and LM79 - LM80 test report of the batch of fittings before installation

Supply and fix LED flood light fitting 120 watt with LED driver and lens complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. NOTE :- The contractor must produce the IK10 and LM79 - LM80 test report of the batch of fittings before installation.

Supply and fix LED Highbay light fitting 100 watt,230 V with lens complete with all accessories and including connecting upto ceiling rose with 0.5 sqmm three core copper flexible conductor cable,One GI medium grade 20 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamp and fastener etc all as specified and as directed.

Supply and fix LED Highbay light fitting 120 watt,230 V with lens complete with all accessories and including connecting upto ceiling rose with 0.5 sqmm three core copper flexible conductor cable,One GI medium grade 20 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener etc complete all as specified and as directed.

Supply and fix LED post top suspended lantern 60 watt made up of die cast aluminium housing, polycarbonate diffuser, power coated IP-65 complete with all fittings, incl three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Jaguar Cat No: LGTP08X060XW or techno commercial Equivalent in Philips/Surya.

Supply and fix LED post top lantern 40 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. NOTE :- The contractor must produce the LM79 - LM80 test report of the batch of fittings before installation. MAKE :- CG Cat no: LPTC-40-WW or techno commercial Equivalent in Philips/Wipro

Supply and fix LED Bollard light with optically design reflactor and indirect-direct, downward directional, high performance, smartly designed asymmetric lighting landscapes of 10 watt ,230 Volt AC with all fittings complete on PCC foundation all fittings complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat no: LB13-131-XXX-65-08 or techno commercial Equivalent in Philips/Jaguar .

Supply and fix LED Bollard light, Tripod type made of extruded aluminium housing to redefine landscape with better light quality and enhance architectural design, rated IP-65 of 10 watt ,230 Volt AC with all fittings complete on PCC foundation complete all as specified and directed by Engr-in-Charge. MAKE :- CG Cat no: LBLSN-10-CDL/WW or techno commercial Equivalent in Philips/Jaguar.

Supply and fix LED Bollard light with robust design and efficient light distribution of 10 watt ,230 Volt AC with all fittings complete on PCC foundation all as specified and directed by Engr-in-charge.NOTE: The contractor must produce the LM79 - LM80 test report of the batch of fittings before installation complete all as specified and as directed. MAKE :- CG Cat part no- LBLSR-10-CDL/WW or techno commercial equivalent in Philips/Wipro/Jaguar.

Supply and fix sheet moulding compound junction (SMC) suitable for terminating 2 Nos 2 x 6/10 Sqmm UG cable including cable glandes- 2 Nos, and two way connector 1 No, size 6" x6" including MCB SP 10 Amps10 KA complete all as specified and as directed.

Supply and fix LED driver suitable for 45 & 60 watt LED security light including taking out defective driver any type, complete all as specified and as directed.

Supply and fix LED driver suitable for 70 t0 90 watt LED security light including taking out defective driver any type, complete all as specified and as directed.

Supply and fix LED driver suitable for 120 watt LED security light including taking out defective driver any type, complete all as specified and as directed.

Material and labour for timer dial type suitable for pannel mounting including taking out old and unservicable time switch any type any size complete all as specified and as directed.

Material and labour for 3 pole contactor, 240 volts,50 HZ up to 415 volt 50 Hz, complete all as specified and as directed.

Supply and fix surge protector suitable for 25, 35,45/60 watt LED security light including taking out defective driver any type. complete all as specified and as directed.

Material and labour for three core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through PVC Conduit incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces complete all as specified and as directed.

Material and labour for rigid non-mettalic PVC conduit of size 20mm inclusive of all fittings i.e. tees, bends, elbows, well mount tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Material and labour for restraining of overhead ACSR conductor of any size of 4 wire 35-40 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P complete all as specified and as directed.

Material and labour for restraining of ACSR conductor of any size of 2 wire 35-40 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P complete all as specified and as directed.

Material and labour for restraining of GI Cradle guard hexagonal/rectangular of any size on 35-40 met span pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P complete all as specified and as directed.

Material and labour for restraining of GI earth wire of any size 35-40 met span on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P complete all as specified and as directed.

Cutting/Trimming of tree branches arround 3.00 met distance from conductors of LT over head line of span up to 45 meters including removing of creepers / vegitation etc from poles complete all as specified and as directed.

Dismantling and taking down old/unsv insulator of any type any size from pole/stay for reuse at site or carrying to store for sch of credit complete all as specified and as directed.

Supply and fix pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade complete all as specified and as directed.

Supply and fix shackle type,porcelian vitreous white, brown or green insulator including galvanised mild steel straps , washers, insulators bolts ,washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and as directed.

Supply and fix heat shrink straight through joint LT 1100 volts grade 6 sqmm, 2 core, make-Raychem, Cat No-EPKJ0081 or techno commercial equivalent of M-Seal/MS Seal/3M complete all as specified and as directed.

Supply and fix heat shrink straight through joint LT 1100 volts grade 10-16 sqmm, 2 core, make-Raychem, Cat No-EPKJ0081 or techno commercial equivalent of M-Seal/MS Seal/3M complete all as specified and as directed.

Supply and fix heat shrink straight through joint LT 1100 volts grade 10-16 sqmm, 4 core, make-Raychem, Cat No-EPKJ0123 or techno commercial equivelant of M-Seal/MS Seal/3M complete all as specified and as directed.

Supply and fix heat shrink straight through joint LT 1100 volts grade 25-50 sqmm, 4 core, make-Raychem, Cat No-EPKJ0130 or techno commercial equivalent of M-Seal/MS Seal/3M complete all as specified and as directed.

Labour only for disconnecting LT cable of any size from pole (height 7.5 to 9 mtr) /panel and re-connecting of cable at both end after removing carbon /burnt insulation part of cable by cutting refixing cable with new cable lugs. The entire repair work to be completed with in 06 hours of instruction from Engr-in-charge as specified. NOTE :- complaint will be notified to contractor on mobile phone at any time between 0800 to 2200 Hrs and has to be rectified with in 06 hours after notification, failing to which Rs500/- per day complaint will be recoverd complete all as specified and as directed.

Material and labour for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr belo ground level connected to galvanized iron strip of size 32x6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earh work GI pipe 20 mm dia medium grade for watering PCC chamber with PCC cover in cement concreate 1:2:4 Type B1 (20 mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc connected to panel board/ Gen set as indicated including testing complete all as specified and as directed. NOTE :- Earth protection pipe & earthing strip upto and including 7.5 m lenth is deemed included in unit rate quoted by the contractor.

Supply and fix MCB, Double Pole 5 to 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand cat part No 4086-09 to 4086-17 or equivalent Schneider / ABB

Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand cat part No 4085-87 to 4085-95 or equivalent Schneider / ABB .

Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA, complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand cat part No 4086-59 to 4086-61 or equivalent Schneider / ABB

Supply and fix Automatic street light switch using NATURE SWITCH for automatic switching of stret lights based on LUX level of natural light. Th sensor (Nature Switch) along with suitable Power contactor, MCB and support Terminals should be enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 8 kW single phase load, Contactor rating :40Amps (2-pole), MCB (Single pole) Rating 63 Amps (2 Nos) complete all as specified and directed by Engr-in-Charge. Nature Switch :- Kakatiya Energy System Ltd, Hyderabad, Model : SWADEEP -02C8KW1P

Supply and fix automatic street light switch using NATURE SWITCH for automatic switching of stret lights based on LUX level of natural light. Th sensor (Nature Switch) along with suitable Power contactor, MCB and support Terminals should be enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 12 kW load equally distributed over three phase load, Contactor rating :40Amps (4-pole), MCB (Single pole) Rating 63 Amps (3 Nos) complete all as specified and directed by Engr-in-Charge. Nature Switch :- Kakatiya Energy System Ltd, Hyderabad, Model : SWADEEP -02C12KW3P

Material and labour for PVC insulated, PVC sheathed twin core 1100 volts grade, 10 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and as directed.

Description all as per item No. 74 above but size of cable 6 sqmm.

Description all as per item No. 74 above but size of cable 4 sqmm size.