Annual Maintenance Contract of Various Electrical / Mechanical Services at FSD Manmad, FSD Ankai and FSD Ahmednagar

AT FSD Manmad, FSD Ankai Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. fans,E.I.,street light/compound lighting 3. water supply 4.LT panel maint. Further to provide insulation tape and Tools and Plant as per the site requirement. (Staff Required) Wireman Gr I - 04 Nos on all working Days & 03 Nos on all S / Saturday, Sunday & Holidays Khallasi - 04 Nos on all working Days & 02 Nos on all S / Saturday, Sunday & Holidays

AT FSD Ahmednagar Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. fans,E.I.,street light/compound lighting 3. water supply 4.LT panel maint. Further to provide insulation tape and Tools and Plant as per the site requirement. (Staff Required) Wireman Gr I - 01 Nos On Two Days Per Week Khallasi - 01 Nos On Two Days Per Week

Supply of 40W LED Lamp. Input voltage range 140-310 V AC alongwith holder etc. as required. Power consumption: 40W, Cool Daylight (6500-7500K) Light Colour: White, Lumen Output>=100 Lumens/Watt with 2 years manufacturing warranty.

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Rewinding of open well submersible pump motor of all types and make upto and including 5 HP with coated copper wires and overhauling with minor repairs,etc., testing for the original speed H.P. and no load consumption & guarantee for one year.

Replacement the existing Impellar of approved make for pump 5 HP of all types with due alignment of the shaft and tested.

Replacement the existing Bush and Bearing of approved make for pump 5 HP of all types with due alignment of the shaft and tested.

Rewinding of mono block pump motor of all types and make upto and including 3 HP with coated copper wires and overhauling with minor repairs etc., testing for the original speed H.P. and no load consumption & guarantee for one year.

Replacement the existing Impellar of approved make for pump 3 HP of all types with due alignment of the shaft and tested

Replacement the existing Bush / Bearing of approved make for pump 3 HP of all types with due alignment of the shaft and tested.

Rewinding the motor of the table / pedstal / ceiling / exhaust fan of all type and make and over hauling including minor repairs and testing of original speed and consumption with gaurantee for one year along with Replacing the existing Ball Bearing & Bushing of complete with alignment of shaft and testing with replacement of Capacitor.

Supply of 1200 mm sweep ceiling fan capacitor type with double ball bearing suitable for single phase AC, 230V 50HZ Confirming to IS 374 / 1979 with upto date amendment.

Supplying of 5 A to 32 A rating 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles etc.as required.(As per IS/IEC 60898-1)

Single pole (32 A)

Double pole (32 A)

Triple pole and neutral or FP (32 A)

Supplying of following size of FRLS PVC insulated copper conductor, single core cable as required (ISI Certified)

Supplying of following piano type switch / socket as required.

3 / 5 pin 5 / 6 amp socket outlet ISI Marked

5/6 A one way Switch ISI Marked

6 pin 15/16 amp socket outlet ISI Marked

15/16 amps one way Switch ISI Marked

Supply of Stepped type Modular Fan regulator (2 module)

Supplying of following Modular type switch / socket as required.

3 / 5 pin 5 / 6 amp Modular socket outlet ISI Marked

5/6 A one way Modular Switch ISI Marked

Repairing of 250 kVA transformer and oil leakage arresting including replacement of gaskets, rubber packing, silica gel, HT/LT bushing repairing, oil filtration and BDV testing with report

Servicing and testing of 3 Nos of 11 kV HT VCB including cleaning, tightening, lubrication, inspection of vacuum interrupters, functional and operational testing, along with supplying and fixing of spare parts: 11 kV PT Fuse (9 Nos.), 3 OC + 1 EF Relay (3 Nos.), Multifunction Meter (2 Nos.), Power Pack (1 No.), Space Heater (6 Nos.), and Thermostat (3 Nos.)

Please Enable Macros to View BoQ information