WBPWDTE/AE/BESD-II/e-NIQ 01 of 2025-26

Amount

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 4Core 120 Sq. mm [7(c)/F4 & 8(b) /F5]

4Core 185 Sq. mm [7(c)/F4 & 8(b) /F5]

4Core 240 Sq. mm [7(c)/F4 & 8(b) /F5]

4Core 35 Sq. mm [7(c)/F4 & 8(b) /F5]

Supplying & fixing medium gauge GI Pipe 80 mm dia ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [11/F-6 ]

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In the ground floor, including the roof. (a) upto 150 mm. thick. [SOR Page 99 of 315 (1/I)]

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in the ground floor as per relevant IS codes. a) Pakur Variety. Ref. SOR Page 24 of 315, Item No. 4(a)

SITC of cubical type L.T. Distribution panel board of size required, Floor mounted compartmentalized with maple arrangement having rigid & self supporting structure fabricated from 3 mm thick CRCA sheet steel with M/S angle frame. The panel board consisting of the following switches. ( ALL THE INCOMING AND OUT GOING SWITCHES WILL BE (Make-- LK(L&T)/Schneider/SIEMENS) (A) Incoming Arrangement:) I) On load front operated Changeover switch open execution type ( panel mounting cubical type) conform to IS 13947 three pole & Neutral AC 50HZ, 415V 415 Amp . II) 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts, etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 415Amp - 01 Nos. B) Bus Section: PVC sleeved TPN electrolytic grade copper bus bar: 500V, 630A ( 400 SQ.MM CU. BAR ) capacity 4 Bar copper bar -1 Set. A bus bar shall be fixed with FRP chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C C) Outgoing arrangement: i) 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts, etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 200 Amp - 01 Nos. ii) 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts, etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160 Amp -------4 Nos. iii) 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts, etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 125 Amp -------2 Nos. iv) 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts, etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63 Amp. -------3 Nos. (D) Inter connection :- 1) Connection between 200A TPN SFUwith Busbar and SFU outgoing with cable alley terminal block by approx. 125 Sq.mm size Tinned Copper Busbar. 2) Connection between 160A TPN SFU with Busbar and SFU outgoing with cable alley terminal block by by approx. 100 Sq.mm size Tinned Copper Busbar. 3) Connection between 125A TPN SFU with Busbar and SFU outgoing with cable alley terminal block by Single Core multi strand Copper 35 Sq. mm UA Cable. 3) Connection between 63A TPN SFU with Busbar and SFU outgoing with cable alley terminal block by Single Core multi strand Copper 16 Sq. mm UA Cable. (E) READING ARRANGEMENT A. Digital 3Ph LED Ammeter Cl 1 with built-in switch.96X96 (Make:- L&T WL131010OOOO) / or equivalent make -1 set. B. Digital 3Ph LED Voltmeter Cl 1 with built-in switch.96X96 (Make:- L&T WL132010OOOO ) -1 set. C. Slide Lock Fuse - 3 Set D .R-Y-B LED Indicator Lamp [L&T/AE/Secure] - 3 Set E. 600/5A INDOOR TAPE INSULATED RING TYPE CT ,A.class- 1 (Kappa/AE)- 04 Nos.

Dismantaling of old panel as per direction of E.I.C

M.S. structural works in columns, beams, etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work, including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m nce charges etc. (For Setting up the panel in trench [SOR Page 99 of 315 (1/I)]

Swarnendu Sarkar (BID ID -6540225)

M/S KUNDU CONSTRUCTION (BID ID -6540315)