REPAIR AND POLISHING OF WOODEN FURNITURE AT BSO FURNITURE YARD UNDER GE 865 EWS

Amount

REPAIR TO CHAIR WRITING (FD-280, FD-202 & FD-20) Opening of joints of damaged/broken member of chair writing where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc.

S&F front leg (left or right ) made out of Ist class seasoned teak wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engr-in-Charge.

All as per item No 1.01 above but rear leg (left or right) all as directed by Engr-in-Charge.

All as per item No 1.01 above but of front/rear/side members of seat bottom

All as per item No 1.01 above but back Stiffener

All as per item No 1.01 above but bottom stiffener

S&F front Arms rest made out with Ist class HW seasoned teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.

S&F in replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Re canning of chair writing with polythene white cane half round as per IS-5378 -1968, 0.3mm thick for seat and 3 to 3.2mm wide including supply of new cane complete all as directed by EIC. Make of cane : Shah/Primier/Ajay

M&L for preparation of wooden surface of Chair writing by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO CHAIR DINNING (FD-279 & FD-228) Opening of joints of damaged/broken member of Chair Dinning where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc.

S&F front leg (left or right ) made out with Ist class seasoned seesham wood of size and shape as per existing chair or as per Drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engr-in-Charge.

All as per item No 2.01 above but rear leg (left or right)

All as per item No 2.01 above but S&F of Front/Rear/Side rail of Chair Dinning all as directed by Engr-in-Charge.

All as per itm No. 2.01 above but back members of Chair Dinning

All as per item 2.01 above but bottom stiffener

S&F in replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Re-canning of chair dining with polythene white cane half round as per IS-5378 -1968, 0.3mm thick for seat and 3 to 3.2mm wide including supply of new cane complete all as directed by EIC. Make of cane : Shah/Primier/Ajay

M&L for preparation of wooden surface of Chair dining by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIRING TO CHAIR EASY (FD-229) Opening of joints of damaged/broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc

Re-canning of chair easy with polythene white cane half round as per IS-5378 -1968, 0.3mm thick for seat and back and 3 to 3.2mm wide including supply of new cane complete all as directed by EIC. Make of cane : Shah/Primier/Ajay

S&F front leg (left or right ) made out with Ist class seasoned teak wood of size and shape as per existing Drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engr-in-Charge.

All as per item No 3.02 above but Rear leg (left and right)

All as per item No 3.02 above but Arms rest

All as per item No 3.02 above but bottom stiffner

S&F in replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

M&L for preparation of wooden surface of chair easy by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engineer-in-charge.

TABLE 900 X 600 WITH / WITHOUT DRAWER (FD-283/284)

Repair of table with or w/o drawer for replacement of unserviceable top with commercial particle board BWR type Gde-I 19mm thick as per Drg of ISI Marked with Ist class seasoned teak wood beading 6mm thick all around including polishing to beading (two or more coats over a coat of wood filler etc).

S&F in replacement of table frames long rail with new table frames long rail made out of Ist class Teak Wood including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

S&F in replacement of new drawer made out of Ist class teak wood with aluminium anodized 35mm/40mm dia knob including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

S&F in replacement of table frames short rail with new table frames short rail made out of Ist class teak wood including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

S&F in replacement of bottom centre stiffener with new bottom centre stiffener of 1st class teak wood including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

S&F in replacement of new aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

S&F in replacement of rubber shoes with new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

S&F in replacement new legs made out of Ist class teak wood as per existing or as per Drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

M&L for preparation of wooden surface of table 900 x600 with/without drawer by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

TABLE WRITING (FD-275)

Removing old unserviceable top and S&F new tops made of particle board 19mm thick commercial BWR Gde I of the size and shape a per Drg ISI Marked with Ist class seasoned teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc. Make : Greenply/Century/Bhutan Board/ Durian

Removing of old unserviceable back ply of table writing and S&F new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing . Make : Greenply/Century/Bhutan Board/ Durian

Removing of old unserviceable bottom stiffner of table writing and S&F new bottom stiffner of size 50 x 25 mm thick made out of Ist class seasoned teak wood as per existing shape and size including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

Opening joints removing old unserviceable legs of tables & S&F new legs made out with Ist class teak wood seasoned all as per Drg or of exsiting pattern etc including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

M&L for preparation of wooden surface of table writing by scrubbing with grit paper to smoothen the surface and apply two or more coat of French polish of required shade complete all as directed by the Engineer-in-charge.

REPAIR TO TEAPOY WOODEN (FD-278)

Removing unserviceable top of teapoys/Teapoy FD and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg ISI Marked and with Ist class seasoned teak wood beading 6mm thick all around including polishing to beading (two or more coats over a coat of wood filler etc). Make : Greenply/Century/Bhutan Board/ Durian

Removing unserviceable/broken stiffener/long rail /side rails of teapoys & S&F new stiffener/long rail /side rails made of Ist class teak wood all as per Drg or existing pattern including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

Removing unserviceable legs of teapoys and S&F new legs made of Ist class teak wood all as per Drg or existing pattern including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as shown on drawing and as directed by Engr-in-Charge.

M&L for preparation of wooden surface of teapoy wooden by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engineer-in-charge.

REPAIR TO PEG TABLE (FD-227)

Removing unserviceable top of Peg table and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg ISI Marked and with Ist class seasoned teak wood beading 6mm thick all around including polishing to beading (two coats over a coat of wood filler etc). Make : Greenply/Century/Bhutan Board/ Durian

Removing unserviceable/broken legs of peg table and S&F new legs made of Ist class HW Seasoned teak wood all as per drg or existing pattern and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc).

Taking out old unserviceable/broken long rail of frame any size and S&F new rail of Ist class Teak wood planned & finishing smooth of existing shape and size and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

All as per Item No 7.03 above but short rail

M&L for preparation of wooden surface of table peg by scrubbing with grit paper to smoothen the surface and apply two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO SIDE BOARD (FD-241)

Removal of old unserviceable/broken existing back of side board and S&F new back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing. Make : Greenply/Century/Bhutan Board/ Durian

Removal of old unserviceable/broken existing legs and S&F new legs of Ist class H.W (Sheesham) of existing shape and size and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

Removal of old unserviceable/broken existing long rail and S&F new long rails of Ist class teak wood existing shape and size duly planned and smooth and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

All as per item No 8.03 here- in-before but short rail

Removal of old unserviceable/broken side of side board and S&F new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified and shown in drawing. Make : Greenply/Century/Bhutan Board/ Durian

Removal of old unserviceable/broken existing partition and S&F new partition of Ist class (teak wood) existing shape and size duly planned and smooth and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

Removal of old unserviceable/broken shelf of side board and S&F new shelf of Ist class (teak wood) existing shape and size duly planned and smooth and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

Removal of old unserviceable/broken top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle board with Ist class seasoned teak wood beading 6mm thick all around including polishing to beading (two or more coats over a coat of wood filler etc) Make : Greenply/Century/Bhutan Board/ Durian

Removal of old unserviceable/broken existing drawer of side board and S&F new drawer of Ist class hard wood (Teak wood ) of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shown in drawing.

M&L for preparation of wooden surface of side board by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO TABLE 900 X 900 X 760MM (FD-291)

Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade ISI Marked including with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading (two coats over a coat of wood filler etc). Make : Greenply/Century/Bhutan Board/ Durian

Removing of old unserviceable leg and S&F new leg of existing shape and size Ist class Teak wood and fixing as shown in drawing and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

Removing of old unserviceable rail and S&F new rail of existing shape and size Ist class Teak wood and fixing as shown in drawing and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

S & F Ist class Teak wood bracket 75mm x 75mm x 25mm triangular( 08 Nos in a table) fixed with suitable size with screws and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

M&L for preparation of wooden surface of table 900mm x900mm x760mm by scrubbing with grit paper to smoothen the surface and and polishing with french polish (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified.

REPAIR TO TABLE DRESSING GENTS

Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with S&F new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and with Ist class seasoned teak wood beading 6mm thick all around including polishing to beading (two or more coats over a coat of wood filler etc) made to shape fixed in position pasted with 01mm thick laminated sheet on top all as shown on drawing. Specified and directed by the Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

S&F in replacement of side with new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6mm thick teak wood beading all-round , made to shape fixed in position all as shown on drg, and polishing with french polish to beading (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified. Make : Greenply/Century/Bhutan Board/ Durian

All as per item No 10.01 but replacement of bottom with S&F new 12 mm thick ply, teak veneered on one side and commercial on other side BWR grade made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge complete material & labour. Make : Greenply/Century/Bhutan Board/ Durian

All as per item No 10.01 but replacement of mirror of size 380 x 760 x 5.5mm thick with teak wood frame complete all as shown on drawing and polishing with french polish to frame (Two coats over a coat of wood filler after preparation of surface etc) complete all as specified. Make : Saint Gobain/Modiguard/Atul

S&F in replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge.

M&L for preparation of wooden surface of table dressing gents by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO TABLE BED SIDE (FD-276)

Taking down old U/S side of table bed side and S&F new sides of 18/19 mm thick pre-laminated particle board exterior grade SI marked as per existing shape and size all as specified and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

All as per item No. 11.01 here-in-above but shelf.

Taking down old U/S back of table bed side and S&F new back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

All as per item No. 11.01 here-in-above but Top of Table Bed Side Make : Greenply/Century/Bhutan Board/ Durian

M&L for preparation of wooden surface of table bed side by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engineer-in-charge.

REPAIR TO TABLE CENTRE WITH SUNMICA TOP/ TABLE CENTRE 2 TIER (FD-235/274/ 375)

Taking down old U/S top of table centre with sunmica top and S&F new top of table centre with sunmica top made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading (two coats over a coat of wood filler etc). Make : Greenply/Century/Bhutan Board/ Durian

Removing of old unserviceable long rail of Table Centre & S&F of long rail made as per existing size and shape or as per Drg Ist class seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable side rail of Table Centre & S&F of new side rail made as per existing size and shape or as per Drg Ist class seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable leg of Table Centre & S&F of new leg made as per existing size and shape or as per Drg Ist class seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

M&L for preparation of wooden surface of table centre with sunmica top/ table centre 2 tier by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

BED PLYWOOD TOP (FD-246)

Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of Ist class seasoned teak wood incl polishing (two coats) over a coat of wood filler after preparation of surface.

Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg Ist class seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make : Greenply/Century/Bhutan Board/ Durian

Removal of old wooden stiffeners and S&F Ist class Hard wood stiffeners of size 50x60mm suitable for bed all as shown in Drg incl polishing two coats over a coat of wood filler after preparation of surface etc.

Taking out old unsv long rail of bed plywood and providing of new long rail of Ist class HW (sheesham) of existing shape and size all as specified and Drg incl polishing two coats over a coat of wood filler after preparation of surface etc.

M&L for preparation of wooden surface of bed ply top by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO TABLE DINING 6/8 PERS (FD-273, FD-1115)

Taking out old unsv top from table dining 6 pers and supply new top of 18/19 mm thick veneered particle board solid core type (1 phase teak veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick around fixed with suitable size of steel screw and applying two coat of French polishing to beading with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed. Make : Greenply/Century/Bhutan Board/ Durian

All as per item No 14.01 here in before but Tabel Dining 8 Pers.

Taking out old unsv legs from table dining 6/8 pers and S&F new legs of teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Taking out old unsv long rail from table dining 6/8 pers and S&F new long rail of teak wood all as shown on drg incl polishing two coats of over a coat of wood filler after preparation of surface.

Taking out old unsv short rail from table dining 6/8 pers and S&F new short rail of teak wood all as shown on drg incl polishing two coats of over a coat of wood filler after preparation of surface.

M&L for preparation of wooden surface table dining 6/8 pers by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engineer-in-charge.

CHAIR DINNING LONG BACK (FD-357)

Removing of old unservicebale rear legs with back and S&F of new rear legs with back of seasoned teak wood all as per drg incl polishing two coats of over a coat of wood filler after preparation of surface.

All as per srl item No 15.01 above but front leg

All as per srl item No 15.01 above but rails

Removing of old tapestry cloth and foam of cushion for both seat and back of chair and S&F (upholstery) of new tapestry cloth & foam of cushion 50mm thick 40 density as per drg and as directed by Engr-in-Charge . Make : Godrej/Sleepwell/Kurlon

M&L for preparation of wooden surface of chair dining long back by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

REPAIR TO CHAIR EASY CUSHIONED (FD-358)

Removing of old unserviceable front/ side/ back rails and S&F new front// side / back rails seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable legs and S&F new legs seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable arms and S&F new arms of seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable foam cushion from chair easy cushioned and S&F new foam cushion of 75mm thick & 50 thick of 40 density for seat and back respectively fixed over wooden frame covered with tapestry cloth not less than Rs 300/- per mtr as approvedby Engr-in-charge and rest all as per drg. Make : Godrej/Sleepwell/Kurlon

M&L for preparation of wooden surface of chair eay cushioned by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engineer-in-charge.

REPAIR TO TABLE 600 x600 x760MM

Taking down old U/S top of table 600 x600 x760mm and S&F new top of table 600 x600x 760mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading two coats over a coat of wood filler etc of the top as specified, shown on Drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Removing of old unserviceable side rail of Table 600x 600 x760mm & S&F of side rail made as per existing size and shape or as per Drg Ist class seasoned teak wood incl polishing two coats of over a coat of wood filler after preparation of surface.

Taking out old unsv legs from table 600 x600 x760mm and S&F new legs of teak wood all as shown on drg incl polishing two coats of over a coat of wood filler after preparation of surface.

M&L for preparation of wooden surface by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

TABLE COMPUTER (FD/E6/MAP/ 03)

Taking down old U/S top of table computer and S&F new top of table computer made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading (two or more coats over a coat of wood filler etc) of the top as specified, shown on Drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Taking down old U/S telescopic channel of pull out tray, drawer and key board tray of table computer and S&F new telescopic channel for pull out tray, drawer and key board tray of table computer as specified, shown in drg and directed by Engr-in-Charge

Taking down old U/S pull out tray of table computer and S &F new pull out tray made of 18/19 mm thick pre-laminated particle board of existing size as specified, shown in drg and directed. Make : Greenply/Century/Bhutan Board/ Durian

Taking down old U/S drawer 75mm deep of table computer and S &F new drawer 75mm deep of existing size as specified, shown in drg and directed.

Taking down old U/S key board tray of table computer and S &F new key board tray of existing size as specified, shown in drg and directed.

Taking down old U/S middle shelf of table computer and S &F new middle shelf of existing size as specified, shown in drg and directed.

Taking down old U/S bottom shelf of table computer and S &F new bottom shelf of existing size as specified, shown in drg and directed.

Taking down old U/S side pannel of table computer and S &F new side pannel of existing size as specified, shown in drg and directed.

M&L for scrubbing and derusting and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) for table computer frame incl preparation of surface all as directed

Taking down old U/S rect PVC cover of table computer and S &F new 25 x50mm rect PVC cover of existing size made to shape as specified, shown in drg and directed.

Taking down old U/S nylon buffer from the leg of table computer and S &F new nylon buffer of existing size as specified, shown in drg and directed.

TABLE CENTRE 16'' X 30'' X 21'' WITH GLASS TOP

Taking down old U/S top of table centre with glass top and S&F new top of table centre with glass top of 10mm thick plate tinted glass ( white colour) 0f 1200mm x900mm with cornor rounded, the edges of top of table should be rounded off as specified, including 04 nos of vacuum rubber for fixiing with frame and as directed by Engr-in-Charge.

M&L for preparation of wooden surface by scrubbing with grit paper to smoothen the surface and applying two coats of French polish of required shade complete all as directed by the Engr-in-Charge.

MIRROR WITH SHELF

Taking out old U/S looking Mirror of mirror with shelf and S &F new mirror of existing size ( 355 x455 x5.5mm ) with teak wood frame of 25mm x19mm and 6mm thick ply wood back incl key plate of 40mm x 25mm x3mm rest all as specified and directed. Make : Saint Gobain/Modiguard/Atul

Taking out old U/S shelf and S & F new shelf made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading (two coats over a coat of wood filler etc) as specified, shown on Drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

M&L preparation of old wooden surfaces and applying two coats of French polish of required shade complete all as directed for the following :-

Hat stand small with mirror

Table office officers wooden

Table office clerk wooden

Table writing 30'' x36'' x21'' Make : Sriram/Usha/Lexus

Table centre 16'' x30'' x21'' Make : Sriram/Usha/Lexus

Table peg 16'' x14'' x21" Make : Sriram/Usha/Lexus

Sofa Chair single seater Make : Sriram/Usha/Lexus

Table bed side Make : Sriram/Usha/Lexus

M/S BAIJ NATH AND SONS

PADMA ENTERPRISES