8809/GWL/E8 SPECIAL REPAIR TO BLDG NO TBD-11 AND TBD-13 INCL CERTAIN REV AND MINOR WORKS UNDER AGE B/R-I AT MORAR CANTT GWALIOR

Amount

Demolition of cement concrete /brickwork of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M & L, hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces.

M&L for cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L Plain cement concrete (1:2:4) Type B0 using 12.5 mm graded stone agg as levelling course/mass concrete/edge of pathway etc complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling,stone slabs,,coocking plateform slabs including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specifeid and directed

M&L for Formwork to faces of Walls complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B-0 ( using 12.5 mm graded stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete al as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B-0 ( using 12.5 mm graded stone aggregate ) as in walls retaining walls, basement walls, ballast walls and the like; complete all as specified and as directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

Taking down cement or cement lime plaster incl wall tiles, any description, on brick ,stone and concrete surface walls including chhajja of any floor and roof projection etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L, 15 mm thick rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and smooth complete all as specified and directed.

M&L, rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces including chhajja's at any floor, parapet and projection of roof, mixed with WPC, finished fair and smooth complete. (WPC shall be measured and paid separately)

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L, applying two coats of distemper, oil emulsion white or tinted over and including a layer of birla or JK wall putty @ 1.20 Kg /Sqm including preparation of newly plastered surface complete all as specified and as directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrapping or any other means, includind removing vegetable/plants root from walls/chajja's and applying two coats of distemper, oil emulsion white or tinted over and including a layer of Birla or JK wall putty @ 1.20 Kg / Sqm complete all as specified and as directed.

M&L, applying two coats of cement base paint including preparation of newly plastered surface of walls complete all as specified and as directed.

M&L, preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Taking down ventilators of any type not exc 1 Sqm each complete all as specified and as directed.

S&F anodised aluminium frame ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.

Supply only 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed.

S&F 2nd class HW plain, solid straight chowkat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 35mm thick factory made, IInd class hard wood, plain framed, paneled shutter with lock rail and panel of 8mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as [per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S & F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed

S&F 150mm long anodised aluminium handles, cast type complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolt stove enameled black with bright bolt each complete all as specified and as directed

S&F 250 mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 mm bolts and nuts four on bolt plate and two on stalle plate complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint including preparation of new wooden surfaces of any description over 10 cm width or girth not other wise described, complete all as specified and as directed.

M&Lin repair, vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed .

S&F pedestal pan and tap, including connection to drain and flusing pipe and seat cover closed pattern with flat bottam, anc cover and mild steel cromium plated or hinging device etc complete all as specified.

S&F in repair flushing jet spray for pedestal pattern EWC including 1 mtr long flexible pipe and brass chromium plated nuts etc complete all as spd and directed

S&F, in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

Supply only brass chromium plated waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

Supply only pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold".

S&F PVC Grating Square 100 mm with hinge (openable) complete all as specified and directed .

S &F tublar towel rail 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed.

S&F in repair wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends and CI brackets complete size (550 x 400mm ) complete all as speicified and directed.

S & F in repairs PVC waste pipe flexible type 32mm bore complete

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F,110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F,110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F,75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F,110mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, provided with access door, complete all as specified and directed.

S&F,75 mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, provided with access door,complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F,110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F, in repair 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair 20 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Taking up and down 15 mm bore steel tubing and connections including cleaning for refixing or to store complete all as specified and directed.

Taking up and down 20 mm bore steel tubing and connections including cleaning for refixing or to store complete all as specified and directed.

M&L, cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc complete all as specified and directed.

S&F, 15mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F, 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F, 15mm of CPVC pipes Brass Elbow complete all as specified and as directed.

S&F, 20mm of CPVC pipes Brass Elbow complete all as specified and as directed.

S&F, 15mm of CPVC pipes Brass Tee complete all as specified and as directed.

S&F, 20mm of CPVC pipes Brass Tee complete all as specified and as directed.

S&F, 15mm of CPVC pipes Male Brass threaded adaptor complete all as specified and as directed.

S&F, 15mm of CPVC pipes Female Brass threaded adaptor complete all as specified and as directed.

S&F, for Tank adaptor complete all as specified and as directed.

S&F,15mm for CPVC pipes UNION complete all as specified and as directed.

S&F,20mm for CPVC pipes UNION complete all as specified and as directed.

S&F,20mm for CPVC pipes Ball Valve complete all as specified and as directed.

S&F rotation moulded polyethylene water storage tank capacity 500 ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old tank and removing to from site complete all as specified and directed.

S&F rotation moulded polyethylene water storage tank capacity 1000 ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old RCC tank and removing to from site complete all as specified and directed.

S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia all as directed.

S&F, in repair 15mm dia brass bib cock, cast copper alloy with butterfly handle, screwed down screwed for iron pipe or for brass ferule complete all as specified and directed.

S&F, in repairs PVC conections 15mm dia for wash hand basin and low level flushing cistern of 450 mm length PTMT nuts at ends to connect pipe or sanitary fitting complete all as specified and directed.

S&F, in repair.15 mm bore stop valve cast copper alloy screwed down high pressure with CAPSTAN HEAD handle chromium plated concealed type screwed both ends for iron pipe or for unions and fixed

S&F, in repair 15 mm bore stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe or for unions and fixed.

S&F, in repair LDPE pipes of pressure rating 6Kgf/Cm Square fixed complete incl all fittings to wall and ceilings or in floors of 32 mm bore complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed

S & F chicken wiremess with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm all as spd and directed.

S&F soap dish, vitreous china white, approximate size 160x 160 x 90 complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated) ect sheets in roof covering including ridges etc complete all as specified and directed.

S&F 0.50mm thick pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified colour as approved by Engr-in-Charge.

S&F 0.50mm thick pre-painted galvatume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified colour as approved by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

M&L for PCC (1:3:6) type C-2, (using 40 mm graded stone aggregate),cement concrete in foundation, filling and mass concrete complete all as specified and directed.

Dismantaling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L, rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate etc of Fe-410W (Gde-250) Quality-A complete all as specifies and as directed.

M&L for roof truses (framed), trussesd, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distances pieces, cleats etc Fe-410W (Gde-250) Quality-A complete all as specifies and as directed.

S&F flat iron 50x5mm thick wind ties fixed to CGI sheets on roof including or necessary drilling, bolting or riveting etc confirming to Fe- 290 grade E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparartion of newly steel surfaces of any description over 10 cm width or girth not otherwise described complete all as specified and as directed.

M&L PCC(1:3:6) type C2 using 40mm stone aggregate in surroundings for benching complete all as specified and directed by Engineer-in-charge.

M&L, Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L,75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection with finished even and smooth without using extra cement complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.

M&L for Providing Cement Concrete 1:2:4 Tpye B1 (Using 20mm graded stone aggrigate) cast -in- situ kerb stone ect in the sides of pathway complete all as directed.

S&F 0.50 mm thick pre -painted galvaltume aluminium zinc coating GI based steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridge specified.

M&L Dismantling of AC ceiling board any descrition complete all as specified and directed.

S&F for, anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle 22x22x1.3 mm and Tee 35x25x1.3 mm of size and grid 600x600 mm with Hangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specifed and directed

M&L, 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium anodised frame and hanges framework fixed complete all as specifed and directed

M&L for 75 mm thick Cement Concrete PCC 1:4:8 type D2 (Using 40mm geaded stone aggregate) as in sub base complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick wall built in cement morart 1:4 complete all as specified and as directed.

S&F steel ventilater with top hung shutter including hinges steel peg stay complete all as specified and directed

M&L for formwork fair finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for mild steel TMT bars 06 mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & rough for laying of wall tiles complete all as specified and as directed.

M & L for 05 mm thick rendering in CM 1:3 on ceiling surfaces , finished fair and even complete all as specified and as directed

M&L for Preparing of newly plastered surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying two coat of white wash , complete all as specified and directed.

M & L for prepartion of new steel surfaces ,exc. 10 cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primewr etc complete all as specified.

S&F 15 mm GI tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors ect complete all as specified and directed.

S& F PVC ( SWR ) floor trap plain with grating including jointng with solvent cement and fixed in repair 75 mm dia outlet complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete with joints to match

S&F aluminum handles cast type, anodized of 100 mm size complete all as specified and directed.

S&F butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 15mm dia stop valve CP fancy type screwed to unioun or GI pipe etc complete all as specified and as directed.

S&F 15mm dia of fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipr or for brass ferrule and fixed complete all as specified and directed.

S&F vitreous china wash down water closet pan ( pedestal pattern ) EWC white shade with required fixing arrangements and plastic water closet seat black closed pattern with flat bottom and cover complete all as specified and as directed.

S&F in repair chromium plated shower rose 125 mm dia approvedcomplete all as specified and directed

S & F PVC Low level flushing cistren 10 Ltr capacety including all itting such as flush pipe brackets complete all as specified and directed.

S&F Vitreous China urinal flat back fully stall type white ( excluding flushing cistern waste pipe, flush pipe) complete all as specified and directed

S&F in repair 32 mm bore,Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends of brackets complete size (550 x 400mm ) complete all as specified and directed.

Supply only Pillar taps cast copper alloy with capstan head Chromium Plated screwed down, high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nut screwed for iron pipe and fixed complete all as specified and as directed

S & F concealed Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (angular type) screwed both ends for iron pipe 15mm bore or for unions and fixed in repair.

S&F PVC Connections 15mm size and 450mm lengthcomplete all as specified and directed.

M&L for towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) all as specified and directed.

M&L for soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed.

S&F Vitreous china squatting pan orrissa patteren size 580x440 mm white with integral foot rest with S & P trap complete all as specified.

M&L for cement concrete bed 1:4:8 type D2 to 150 mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 150 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

M&L for construction of septic tank including excavation, in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work, slab cover including RCC precast cover slab having 6 mm plate embedded all around with angle iron frame, vent pipe shaft and sludge chamber etc complete for 50 users complete all as specified and shown in dwawing No. CEBZ/TD/76/2011 Sht No 1/2 to 2/2 .

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 50 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia complete all as specified and directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 50 mm dia complete all as directed.

M&L for Construction of valve chambers of size 1.5x1.5 x1.2 internal dimentions with 150 mm thick PCC foundation 1:4:8 type D2 using 40 mm graded trap stone aggregate, 230 mm thick brick masonary wall with sub class 'B' bricks builts in cement mortar 1:4 10 mm thick plastering to brick masonary in cement mortar internally and externally upto 15 cm below ground level, 50 mm thick coping with PCC 1:2:4 type B1 using 20 mm graded crushed trap stone aggregate valve chamber having coller frame size 1.5x1.5 x1.2 made of mild steel angles of size 50mm x 50mm x 6mm and cover made of 2.5 mm thick mild steel sheet framed by 40x40x5 mm MS angle having 02 nos cross 'X' supprt fixed with coller frame by mild steel hinges - 02 Nos, locking arrangements with provision of locks and painting the steel surfaces with two coats of alluminium enameled paint over a coat of zinc chromate primer including neccessary earth work, excavation, all as specified and directed by Engineer-in-Charge .

Excavation in trenches not exceeding 1.5M width and not exceeding 1.5M depth and getting out for laying of pipe etc in soft/loose soil.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil.

Removing excavated surplus in soft/loose soil. to a distance not exceeding 50M and depositing where directed and at a level not exceeding 1.5M above the starting point.

Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 50 mm dia from 100 mm bore of pipe existing CI pipe.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete:-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

One bell point controlled by one bell push

All as per item No 165 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S & F Lamp holder with metal ring, PVC/ Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix Exhaust fans 300mm sweep double bearing with all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

Supply & fixing water heater storage type metallic stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, having Temp control rotating switch facility including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed.

S&F Sheet metal enclosures single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 amps, 240 volts, 10 KA complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole & Including MCCB 63 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 Core complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete.

S&F sheet metal Enclosure with socket Plug top and earth plug, single pole and neutral with single pole MCB 20 Amps 240 volts in repairs complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 16 Sqmm 2 Core.

S&F Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 25 mmm dia all as specified and directed.

S&F Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mmm dia all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.

S&F bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F LED Lamp 09/10 watt complete.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fix energy efficient having service valve more than 4.6 BLDC ceiling fans 1200 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

S&F Electric Bus bar with 100 AMP,415 Volts(Heavy Duty,Metal,grey) complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 3.5 Core.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 70 Sqmm 3.5 Core.

M/s KGN Builders

MAHARAJ KUNWAR SAHAB CONSTRUCTION

M/s. Varinder Kumar Sharma

M.S. ENGINEERS

M/s Tirupati construction

Babatia super works

M/s Himgiri construction

BHAGIRATH CONSTRUCTION COMPANY

M/S MAHAVIR SINGH

M/S SANJAY AGARWAL

M/S YOGANSH CONSTRUCTION CO.

Arkay Instrumentation

M/s Ratan Lal Jain and Co.

M/s Subhash Construction Co.