Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAdmitted-Finance | ₹41.7 L | L1 | Admitted-Finance |
| 2 | L2₹42.2 L+₹48,566 (1.16%)Admitted-Finance | ₹42.2 L+₹48,566 (1.16%) | L2 | Admitted-Finance |
| 3 | L3₹42.5 L+₹71,341 (1.71%)Admitted-Finance | ₹42.5 L+₹71,341 (1.71%) | L3 | Admitted-Finance |
| 4 | L4₹43.2 L+₹1.5 L (3.48%)Admitted-Finance B 86 GREEN PARK CHIPYINA NEAR JAAT CHOWK GAUTAM BUDH NAGAR 201009 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201009 | ₹43.2 L+₹1.5 L (3.48%) | L4 | Admitted-Finance |
| 5 | L5₹43.4 L+₹1.7 L (4.03%)Admitted-Finance | ₹43.4 L+₹1.7 L (4.03%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Ats Electricals L1 | M/S. KISHAN ENGINEERING L6 | M/s Bapujee Builders and Traders L5 | S J ENTERPRISES L8 | M/s M M Engineering Systems L7 | Commercial Electric Co. L10 | M/s MAA BHAIRABI ENTERPRISES L2 | VIRAN group L3 | PRAGYA GREENTECH L4 | ASHOK CONSTRUCTIONS L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down old unsv/burnt LT panels/Feede pillar of any capacity and supply, install, testing and commissinoning of LT panel board indoor type of size 2250 mm long X1800 mm width X 400 mm thickness(depth) (length and width and thickness of LT panel sizes if required for heigher & lower size as required and decided by Engr-in-charge) with single door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 2 to 2.15mm thick at outer sheet and 1.60 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6 mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of following:- | 2 | Each Job | 6,21,462 ₹12,42,924 | 6,10,980 ₹12,21,960 | 5,99,000 ₹11,98,000 | 6,16,970 ₹12,33,940 | 6,13,975 ₹12,27,950 | 6,25,000 ₹12,50,000 | 6,28,950 ₹12,57,900 | 6,31,945 ₹12,63,890 | 4,95,000 ₹9,90,000 Lowest | 6,25,955 ₹12,51,910 |
| 2.00Note:- (i) LT panel board manufactured by any manufacturer should be followed by CPRI norms/certified and also zonal approved maufacturers only. (ii)The contractor shall be arranged General (SLD), circuit lay out drawings & Switch gear items makes/brands submitted for prior approval by the Accepting Officer/Engineer -in-charge before procurement/ordering. (i) Incoming:- MCCB,4 pole,400 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with THERMAL MAGNETIC based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N.-01 Nos (ii) Outgoing :- ON-Load change over switch with front operated handle 315Amps,415Volts 4 Pole incl steel coated factory fabricated spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N-01 Nos. | |||||||||||||
| 3.00(iv) MCCB,4 pole,125 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB (v) MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB (vi) MCCB,4 pole,63 Amps,415 Volts, 16/18 to 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB (viii) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S (ix) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No. (x) 400/5A current transformer -03 No's (xi) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS, (xii) Protection fuses& controll wiring -03 Nos (xiii) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 400 amps rating -01 Set | |||||||||||||
| 4.00 | Taking out old unsv existing on load change over with wall mouted sheet steel enclosure any type/rating and incl providing supply and fix on load change over switch 415V in wall mounted sheet metal enclosure/open excution type/side handle type as per site requiremet 4 pole of capacity 400 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed. | 1 | Each | 88,608 ₹88,608 | 86,904 ₹86,904 | 85,200 ₹85,200 | 88,011 ₹88,011 | 87,543 ₹87,543 | 90,000 ₹90,000 | 89,630 ₹89,630 | 90,141 ₹90,141 | 65,000 ₹65,000 Lowest | 89,119 ₹89,119 |
| 5.00 | Taking out old unsv existing on load change over with wall mouted sheet steel enclosure any type/rating and incl providing supply and fix on load change over switch 415V in wall mounted sheet metal enclosure/open excution type/side handle type as per site requiremet 4 pole of capacity 250 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed. | 1 | Each | 64,480 ₹64,480 | 63,240 ₹63,240 | 62,000 ₹62,000 | 64,046 ₹64,046 | 63,705 ₹63,705 | 70,000 ₹70,000 | 65,224 ₹65,224 | 65,596 ₹65,596 | 35,000 ₹35,000 Lowest | 64,852 ₹64,852 |
| 6.00 | Taking down old unsv busbar from existing location and incl providing supply and fix supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 315/320A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . | 1 | Each | 34,320 ₹34,320 | 33,660 ₹33,660 | 33,000 ₹33,000 Lowest | 34,089 ₹34,089 | 33,907 ₹33,907 | 40,000 ₹40,000 | 34,716 ₹34,716 | 34,914 ₹34,914 | 1,10,000 ₹1,10,000 | 34,518 ₹34,518 |
| 7.00 | Taking down old rusted unsv cable tray from existing location and supply and fixing new pre galvanized pertorated cable tray 100mm x 100 mmx1.60mm suitable for fixing on wall/roof hanging/ floor mounted as per site requirement and including providing GI hanging rod,nuts,bolts and washers complete all as specified and directed. | 70 | RM | 977 ₹68,390 | 958 ₹67,060 | 940 ₹65,800 | 971 ₹67,970 | 965 ₹67,550 | 360 ₹25,200 Lowest | 988 ₹69,160 | 994 ₹69,580 | 1,250 ₹87,500 | 983 ₹68,810 |
| 8.00 | Taking down old rusted unsv cable tray from existing location and supply and fixing new pre galvanized pertorated cable tray 100mm x 50 mmx1.60 mm suitable for fixing on wall/roof hanging/ floor mounted as per site requirement and including providing GI hanging rod,nuts,bolts and washers complete all as specified and directed. | 70 | RM | 904 ₹63,280 | 887 ₹62,090 | 870 ₹60,900 | 898 ₹62,860 | 893 ₹62,510 | 320 ₹22,400 Lowest | 915 ₹64,050 | 920 ₹64,400 | 900 ₹63,000 | 910 ₹63,700 |
| 9.00 | Taking down old unsv busbar from existing location and incl providing supply and fix supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 250A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . | 1 | Each | 43,680 ₹43,680 | 42,840 ₹42,840 | 42,000 ₹42,000 | 43,386 ₹43,386 | 43,155 ₹43,155 | 40,000 ₹40,000 Lowest | 44,184 ₹44,184 | 44,436 ₹44,436 | 1,25,000 ₹1,25,000 | 43,932 ₹43,932 |
| 10.00 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed. | 6 | Each | 8,840 ₹53,040 | 8,670 ₹52,020 | 8,500 ₹51,000 | 8,780 ₹52,680 | 8,733 ₹52,398 | 7,500 ₹45,000 Lowest | 8,942 ₹53,652 | 8,993 ₹53,958 | 20,000 ₹1,20,000 | 8,891 ₹53,346 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
10 Aug 2026, 5:00 pmClosed
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
REPAIR AND REPLACEMENT OF OLD UNSV DEFECTED LT PANELS UG CABLES LT SWITCH GEAR ITEMS IN CENTRAL AC PLANTS UNDER GE(I) GOS
2026_MES_779369_1
GE/GOS/TOK/94 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
GOS
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹80,000
5 Sept 2026
17 Jul 2026
14 Aug 2026
17 Jul 2026
10 Aug 2026
3 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down old unsv/burnt LT panels/Feede pillar of any capacity and supply, install, testing and commissinoning of LT panel board indoor type of size 2250 mm long X1800 mm width X 400 mm thickness(depth) (length and width and thickness of LT panel sizes if required for heigher & lower size as required and decided by Engr-in-charge) with single door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 2 to 2.15mm thick at outer sheet and 1.60 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6 mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of following:- | 2 | Each Job | - | - |
| 3 | (iv) MCCB,4 pole,125 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB
(v) MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB
(vi) MCCB,4 pole,63 Amps,415 Volts, 16/18 to 25 KA,50Hzs Manual drawout type with thermal magnetic based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB
(viii) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S
(ix) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No.
(x) 400/5A current transformer -03 No's
(xi) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS,
(xii) Protection fuses& controll wiring -03 Nos
(xiii) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 400 amps rating -01 Set | - | - | - | - |
| 4 | Taking out old unsv existing on load change over with wall mouted sheet steel enclosure any type/rating and incl providing supply and fix on load change over switch 415V in wall mounted sheet metal enclosure/open excution type/side handle type as per site requiremet 4 pole of capacity 400 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed. | 1 | Each | - | - |
| 5 | Taking out old unsv existing on load change over with wall mouted sheet steel enclosure any type/rating and incl providing supply and fix on load change over switch 415V in wall mounted sheet metal enclosure/open excution type/side handle type as per site requiremet 4 pole of capacity 250 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed. | 1 | Each | - | - |
| 6 | Taking down old unsv busbar from existing location and incl providing supply and fix supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 315/320A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . | 1 | Each | - | - |
| 7 | Taking down old rusted unsv cable tray from existing location and supply and fixing new pre galvanized pertorated cable tray 100mm x 100 mmx1.60mm suitable for fixing on wall/roof hanging/ floor mounted as per site requirement and including providing GI hanging rod,nuts,bolts and washers complete all as specified and directed. | 70 | RM | - | - |
| 8 | Taking down old rusted unsv cable tray from existing location and supply and fixing new pre galvanized pertorated cable tray 100mm x 50 mmx1.60 mm suitable for fixing on wall/roof hanging/ floor mounted as per site requirement and including providing GI hanging rod,nuts,bolts and washers complete all as specified and directed. | 70 | RM | - | - |
| 9 | Taking down old unsv busbar from existing location and incl providing supply and fix supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 250A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . | 1 | Each | - | - |
| 10 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed. | 6 | Each | - | - |
| 11 | M&L for PVC insulated sheathed single core 70 sqmm unarmed LT copper conductor cable as earth continuity conductor with galvanized shaddle with screws for two number in each running metre complete all as specified and directed. | 30 | RM | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
tender_docs.pdf
Tender Documents • 1.26 MB
BOQ_872942.xls
BOQ • 2.24 MB
amdt94.pdf
PDF • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .