REPAIR AND MAINT OF ELECTRIC SUPPLY LT PANELS, MCCB, STREET LIGHTS AND OTHER CONNECTED WORKS AT MIL STN NAHAN UNDER GE CHANDIGARH.

Amount

Excavation in trenches in hard and dense soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed.

Add to item no 01 above for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material(soil/rocks) not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as directed.

M & L for Brick protection for LT cable with sub class B bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge.

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed.

Supply and fixing in replacement of GI pipe light grade size 150 mm dia for protection of UG cable , Road crossing, complete and incl M & L for Clamps suitable size with nuts, bolts, complete all as specified and directed.Make:Jindal/Tata/Surya

All as per item No 07 but size 80 mm dia

All as per item No 07 but size 50 mm dia

All as per item No 07 but size 32/40mm dia

Taking out old defective Under Ground cable from trenches / floor / road / wall / pipe / pole of size 10 sqmm 2 core complete all as specified and directed,

All as per item 11 but size 95 sq mm 3.5 core

All as per item 11 but size 185 sq mm 3.5 core

Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles complete all as specified and directed Note :- Excavation & earth work shall be measured & paid separately under respective item of this schedule . Make:Finolex/Asian cables/Gloster.

All as per item 14 but size 95 sq mm 3.5 core

All as per item 14 but size 185 sq mm 3.5 core

M&L in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm 3.5 core complete all as directed.

Supply & fixing in replacement of Busbar chamber comprising of 3 copper strips 400 Amp & one copper strip of cap 200 Amps and minimum length 460mm long enclosed in sheet metal enclosure including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed.Make:Havell's Cat No: IHBB040004)/Siemens/ Indo Asian.

M&L in replacement of 25 Sqmm (nominal area) single core FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit 25 mm dia with including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles complete all as specified and directed including dismantling/taking out old unserviceale one complete all as directed.-Make of copper wire :-Finolex/Havells Cat No : WHFFDN…B1025 /RR

Meterial and labour for cement concrete in foundations for pole coping or any other work type B0 1:2:4 with 12.5 mm graded crushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm gradedcrushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.

Supply and fix in replacement of security light fitting bracket made up of 25/32 mm dia medium grade pipe of length 1.2 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed

Supply and fix Steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws etc including making the holes on the pole (bottom and top) suitable size for drawing of wire 1.5 sqmm 3 core round flexible for connection of security light fitting from junction box to light fittings including of one primer coat, one under coat and one finishing coat of silver paint including dismantling/taking out old unserviceale one all as specified and directed.Make:National tubing co Kanpur/M/S Bharat conduit & steel works Kanpur /C&s Electric.

Supply and fixixg of pressure die cast aluminium housing LED security light fitting 120 watts with heat resistant glass IP 65 protection with uniform light distribution internally prewired with electronic driver and surge protection 10 KV unit including 03 core flexible connecting cord of suitable size with mounting bracket made up of suitable size of light grade GI pipe of length 1.5 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut, bolts and washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint including dismantling/taking out old unserviceale one complete all as specified and directed. Make:Crompton Greaves Cat No LSTN-120-CDL-A (HAWK),Bajaj, Philips . C&S

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 16 sq mm 2 core complete all as directed.Make:Finolex/Havells/RR cables.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as directed.Make:Finolex/Havells/RR cables.

Material and labour for Sub main wiring with 2 run of 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit 15 mm dia with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connection from distribution board to light fittings including dismantling/taking out old unserviceale one complete all as directed.-Make of copper wire :-Finolex/Havells/RR cables. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoated rates.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

Supply and fix Astronomical time switch/Astro timer ( Rev-302) brand Novatek Electro(Having longitude and latitude of Indian cities in memory) 250 volts single phase of 20 Amp rating with contactor 40 Amps, MCCB 3 Pole, 415 V, fixed type, 63 Amps with breaking capacity 16 KA fitted inside the steel enclosure including of one primer coat, one under coat and one finishing coat of synthetic enamelled paint incl taking out unserviceable timer panel complete all as specified and as directed. Make: L&T/HAvell's/Indoasian.

Supply and fixing Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit 18W LED bulb with B22 based incl necessary mounting pole of GI tubing light grade suitable dia of required length incl necessary form work , all fixing accessories,monkey menace protection using steel spikes & barbed wire etc and all electric connections and testing complete incl taking out unserviceable fittings all as specified and as directed of Cat No - LHFHASE1TL4K015 of Havelles or equivalent to Halonix/Wipro/Crompton/C&S. Note: LED bulb 18 watt shall be measured in this quoted rate.Nothing extra is admissible on this account.

Supply and fixing in replacement of 18/20 watts wall mounted decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate housing intrernally pre wired with electronic driver unit with diffuser soft glare free light distribution including white colour 03 core flexible connecting cord of suitable size complete all as specified and directed.Make:Philips/Crompton Greaves Cat No:LCTL-18-CDL(Trim Linea)/Bajaj/C&S. Note: LED bulb 18 watt shall be measured in this quoted rate.Nothing extra is admissible on this account.

Supply and fix Junction box made out of thermo plastic material of size 240x130x110 mm with provision of single phase cable connector incomming and out going with MCB SP 6-32 amps for security light fitting/PTL IP 65 protection totally enclosed weather proof with cable entry along with GI clamps nut bolts & washer fixed on pole including dismantling/taking out old unserviceale one all as directed.

Supply, Install, jointing, connecting and testing complete Automatic Star-Delta starter suitable for 100 HP , 75 KW 415 Volts in stainless steel housing IP 54 protection class with built in relays suitable for 100 HP pump set including dismantling/taking out unserviceable existing starters complete all as specified and directed. Make :- Siemens or equivalant in L & T, ABB

Supply and fix IP 65 protection LED bollard fitting 9 watts with electronic driver unit and lamp for landscape lighting having aluminium housing translucent diffuser tube polycorbonate, the colour of bollard is gray or silver and height of bollard 60 cm including mounting nut bolts PVC connecter incl monkey menace protection using steel spikes & barbed wire etcand taking down old unserviceable lights complete all as directed.Make: Jaquar, bajaj Cat No: BGBOL 605 9W LED (Flute),crompton,Philips,C&S

Supply and fix IP 65 protection LED spike light fitting 9 watts RD,GR,BL & WW with electronic driver unit and lamp made in pressure die cast housing and heat shrink in aluminium extrusion with mounting nut bolts PVC connecter incl monkey menace protection using steel spikes and barbed wire etc as required and taking down old unserviceable lights complete all as directed Make: Jaquar, bajaj Cat No: BGSBL 9 W LED WW ,crompton,Philips ,C&S

Supply and fix IP 66 protection LED flood light fitting 200 watts with electronic driver unit and lamp with secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion with mounting nut bolts PVC connecter incl monkey menace protection using steel spikes & barbed wire etc and taking down old unserviceable lights complete all as directed. Make: Jaquar, bajaj,crompton Cat No: LSFO-200-CDL/60 (Secure),Philips/C&S

Supply and fixing of cubical out door type feeder pillar box for housing DB etc, of size 450 mm x 300 mm x 600 mm made out of CRCA Sheet 3.2 mm thick, duly powder coated from inside and outside, dust, vermin and weather proof, having front openable door with cam locking arrangement incl provn of 65mm Godrej (freedom) lock with 02 keys, 2mm thick MS gland plate for cable entry provided at bottom, foamed-in PU gasket around doors & gland plates, earthing straps, complete panel fixed on 40 x 40 x 3 mm angle iron 04 leg frame duly grouted in PCC (1:2:4) (Each leg 50cm grouted in ground/floor and 40 cm above floor level) with inbuilt of Double door MCB DB SPN 8 way with MCB SPN 6 to 32 Amps - 01No and MCB SP 6 to 32 Amps - 04 No’s including making electrical connection of incoming supply and all out going electric circuit,through proper lugs/thimbles complete all as directed. Make: Havell's/Legrand/L&T.

Opening of Alternator and separte the stator, rotor assambly and taking down burnt winding from stator, exciter field and rewinding of stator with dual coated supper enameld copper conductor of existing gauge with 'H' class insulation coating including replacement of fibre glass (H71A) tape, sleeves, slot wedges, terminal lead etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process and reassemble the alternator complete all as directed. Make of Varnish - Dr Beck or equivalent of 'H' class insulation

Meterial and labour for rewinding of exciter rotor with dual coated supper enameld copper conductor of existing gauge including replacement of fibre glass tape sleeves etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process all as directed.

Meterial and labour for taking down the rotor bearing of the alternator by puller and supply fix new bearing of existing size all as directed Make - NBC,SKF

Meterial and labour for taking down the unserviceable diode from exciter and fixing of new diode as per existing rating complete all as directed

Meterial, T&P and labour for loading, unloading of alternator ,transportation from site to workshop and Workshop to site for rewinding of alternator all as directed

Material and labour for cleaning of rotor pole coils, varnishing the coil including removing the corbon particles from rotor and greasing the main bearing of rotor assambly complete all as directed.

Supply and fix LED aviation obstruction light aluminium housing with poly corbonate enclosure with internally prewired electronic driver unit and necessary mounting pipe of 20 mm dia medium grade pipe of 1.2 mtr length with mounting nut bolts/clamps and provision to fix two lights incl monkey menace protection using steel spikes and barbed wire etc as required all as directed Cat No- BGAV 302LED of Bajaj or equivalent in crompton, philips,C&S.

S & F Rigid non-metallic PVC conduit exclusive 2 mm thick 40 mm dia of boxes junction/terminal) but inclusive of all tees, bends, elbows, educers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. etc complete all as specified and directed. Make : Plaza/Anchor/Finolex

Material and labour for making test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos . 8mm dia 25 mm long hex. head screw etc for earthing including material and labour for making encloser for test point made of mild steel steet of 2.0 mm thick of size 10"x10"x10" in box shape, openable from front side with locking arrangement incl provn of 65mm Godrej (freedom) lock with 02 keys, mounted/grouted into wall covering to the test point all as specified and directed at site.

Material and labour for air termination, single pointed 12 mm dia, 300 mm long made of solid copper rod bolted including provising of 2 Nos brass nuts and bolts for bolting the rod with down lightning conductor of 20 mm X 3 mm copper strip through copper/brass nuts & bolts etc all as specified and directed.Make:Bhel/JaipuraSchneider.

Material and labour for fixing of copper strip 20 mm x 3.15 mm thick with procelain insulator with copper/brass nuts and bolts over the roof, wall, floor etc all as specified and directed.

M&L for earthing complete with copper plate earth electrode of size 60 cm X 60 cm X 3.15 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip of 20 mm X 3 mm thick by means of brass or copper alloy nuts, bolts, check nut and washer including earthing pit made by PCC (1:3:6 )type C-1, RCC (1:2:4) type A-1 pre cast cover (54cm X 54cm x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab and 15 mm dia medium grade GI pipe for watering with funnel having wire mesh and 40 mm dia medium grade GI pipe for protection of copper strip including providing charcoal or coke and salt in alternative layer of 15 cm complete all as shown in electrical plate No-3 including necessary earth work such as excavation, removal of soil n.exc 50 mtr, returning and refilling dismantling the old unserviceable earthing all as specified and directed.

M&L in replacement of Finger contact, CT,No volt coil,relay ,nut,bolt & washer etc including replacement of transformer oil 20 ltrs as per existing make/type/Capacity of 400KVA OCB complete all as directed by Engr-in-Charge.

Material and labour forHalogen light 500 watts with frame with accessories etc complete all as specified and as directed. Make: Havelles or equivalent to Halonix/Wipro/Crompton/C&S.

M&L for two coats of synthetic paint anti corrosive superior tint on steel and iron surfaces incl one coat of red oxide primer first quality for DG Set 20 KVA to 125 KVA silencer exhaust system complete all as specified and directed.

M/S SHANTI SARUP DINESH CHAND

SANJEEV ENTERPRISES