REPAIR AND PAINTING OF VARIOUS STEEL AND WOODEN FURNITURE ITEMS ETC AT BAGRAKOTE UNDER GE SEVOKE ROAD

Amount

BED PLY WOOD TOP (Drg No FD-246 & 247)

Taking out old broken damaged head board frame from bed plywood top and supply and fixing new head board frame made out of 2nd class soft wood complete all as specified in drawing and directed.

Taking out old broken damaged 4mm thick plywood from both sides of head board and supply and fixing new 4mm thick one side teak veneered plywood pasted with synthetic adhesive on the frame of head board including teakwood beading all around the head board frame complete all as specified in drawing and directed.

All as per item No 1.01 here-in-before but foot board frame of bed plywood top complete all as specified in drawing and directed.

All as per item No 1.02 here-in-before but foot board of bed plywood top complete all as specified in drawing and directed.

Removing old broken damaged long rails of bed plywood top and supply & fixing new long rails, size 1980x100x35mm, made out of well seasoned 1st class timber Teak/shisham in the shape & size and fixed on the existing frame of bed plywood complete all as specified in drawing and directed.

Removing of broken damaged decayed short rails of bed plywood top & fixing only short rails made out of old long rails obtained from Serial item No 1.05 above complete all as specified in drawing and directed.

Removing of old broken damaged plywood top from the bed plywood top and supply & fixing new 12mm thick plywood top 7 ply BWR exterior grade commercial type ISI marked complete all as specified in drawing and directed.

Removing of broken damaged decayed long legs of bed plywood top and supply & fixing new long legs made out of Ist class teak wood & fixed on the existing head board frame complete all as specified in drawing and directed.

Removing of broken damaged decayed short legs of bed plywood top and supply & fixing new legs made out of Ist class teak wood & fixed on the existing head board frame complete all as specified in drawing and directed.

SIDE BOARD (Drg No. FD-26(m) & 241)

Removing of old unserviceable top from side board and supply & fixing new top made out of 19mm thick Pre-laminated particle board exterior grade one side teak veneered & other side having balancing white lamination complete all as specified and shown on drawing & directed by Engr-in-Charge.

Taking down old unserviceable shutters from side board and supply & fixing new shutters made out of 18/19mm thick pre-laminated particle board exterior gde one side teak veneered & other side having balancing white lamination including fixing of teakwood beading all around of size 19x6mm fixed with and including MS hinges 75mm long complete all as directed & shown on drawing.

Taking out old unserviceable plywood back from side board and supply & fixing new plywood back of 6mm thick commercial gde of approved quality complete all as directed & shown on drawing.

Taking out old unserviceable drawers from side board and supply & fixing new drawers made out from 6mm thick plywood commercial gde & 12mm thick teakwood plank as approved complete all as directed & shown on drawing.

Taking out old unserviceable legs from side board and supply & fixing new legs made out of well seasoned teakwood complete all as directed & shown on drawing.

Removing of old unserviceable sides of side board and supply & fixing new side made out of pre-laminated particle board one side teakwood finish as approved quality complete all as specified & shown on drawing.

Supply & fixing of 35mm round brass knob to the shutters & drawer of side board complete all as specified & shown on drawing.

Removing of old unserviceable locks from the shutters of side board and supply & fixing new locks brass body 4 levers 40mm with duplicate keys complete all as directed & shown on drawing.

Supply & fixing of 75mm but hinges brass medium weight of approved quality complete all as specified & shown on drawing.

CHAIR CB OFFICE (Drg No. DB-4124 & 3982)

Taking out old unserviceable front legs of chair CB office and supply & fixing new legs made out of Ist class well seasoned teak/shisham wood complete all as directed & shown on drawing.

Taking out old unserviceable rear legs of chair CB office and supply & fixing new rear legs of chair CB office made out of 1st class well seasoned teak/shisham wood complete all as directed & shown on drawing.

Taking out old unserviceable front and rear rails of chair CB office and supply & fixing new front and rear rails duly making holes for canning as per drawing made out of 1st class well seasoned teak/shisham wood complete all as specified & shown on drawing.

Taking out old unserviceable side rails of chair CB office and supply & fixing new side rails of seat of chair CB office duly making holes for canning made out of 1st class well seasoned teak/shisham wood complete all as directed & shown on drawing.

Taking out old unserviceable arms of chair CB office and supply & fixing new arms of chair CB office made out of 1st class well seasoned teak/shisham wood complete all as directed & shown on drawing.

Taking out old unserviceable stiffener of chair CB office and supply & fixing new stiffener of chair CB office made out of 1st class well seasoned teak/shisham wood complete all as specified & shown on drawing.

Removing of old torn cane plastic of chair CB office and re-canning with 2mm dia half round white plastic cane. Canning shall be done as per Godrej pattern complete all as directed & shown on drawing.

CHAIR DINNING (Drg No. FD-16(m), 229 & 279)

Removing of damaged unserviceable parts of chair dinning and supply & fixing the following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing :-

Front legs

Side rails

Back rest

Rear legs

Stiffener long

Stiffener short

Rear/Front rails

Removing of old torn unserviceable cane plastic from chair dinning & recanning the same with 2mm wide white plastic cane half round oval shaped & beading with 3mm wide plastic cane half round. Canning shall be as per Godrej pattern complete all as directed & shown on drawing.

CHAIR WRITING (Drg No. FD-250 & 280(m)

Removing of damaged/broken/unserviceable parts/ components of chair writing as under and supply & fixing new components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing.:-

Side rails of seat

Back side rail of seat

Front side rail of seat

Front legs

Rear legs

Stiffeners

Arms ( Hand rest)

Back rest

Removing of old unserviceable cane plastic from chair writing & recanning the same with 2mm wide half round oval shaped plastic cane white in colour with a beading of 3mm wide half round oval shaped plastic cane white. Canning shall be done as per Godrej pattern complete all as directed & shown on drawing.

CHAIR EASY (Drg No. FD-17(m) & 229(m)

Removing of damaged/unserviceable parts/ components of chair easy and supply & fixing following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing :-

Front/back rails of seat

Hand rest (Arm)

Front legs

Rear legs

Side rails of seat & back

Removing of old unserviceable cane plastic from seat & back of chair easy & recanning the same with 2mm wide plastic cane white in colour half round oval shaped a beading of 3mm wide white plastic cane half round oval shaped. Canning shall be as per Godrej pattern complete all as directed & shown on drawing.

TABLE WRITING (Drg No. FD- 33m, FD-275)

Removing old unserviceable top of table writing and supply & fixing new top made out of 19mm thick pre-laminated particle board exterior grade one side teak veneered with 4mm teakwood beading all around the top complete all as directed & shown on drawing.

Taking out old unserviceable sides of table writing and supply & fixing new sides made out of 19mm pre-laminated particle board one side teak veneered complete all as directed & shown on drawing.

Removing of old unserviceable shutters of table writing and supply & fixing new shutter made out of 19mm thick pre-laminated particle board one side teak veneered exterior grade including fixing of new or old serviceable hinges 50mm MS medium weight complete all as directed & shown on drawing.

Taking out old unserviceable drawers from table writing and supply & fixing new drawers made out of pre-laminated particle board & 1st class well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete all as directed & shown on drawing.

Removing of unserviceable mild steel hinges from shutters and supply & fixing mild steel butt hinges 50mm medium weight cold rolled complete all as directed & shown on drawing.

Removing of unserviceable knobs from shutters & drawers of table writing and supply & fixing new 35mm round brass knob of approved quality complete all as directed & shown on drawing.

Taking out old unserviceable plywood back of table writing and supply & fixing new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drawing.

Taking out old unserviceable long legs of table writing and supply & fixing new long leg made out of 1st class teak wood well seasoned complete all as directed & shown on drawing.

Taking out old unserviceable short legs of table writing and supply & fixing new short legs made out of 1st class teak wood well seasoned complete all as directed & shown on drawing.

Taking out old unserviceable long stiffener of table writing and supply & fixing new long stiffener made out of 1st class teak wood well seasoned complete all as directed & shown on drawing.

Taking out old unserviceable short stiffeners of table writing and supply & fixing new short stiffeners made out of 1st class teak wood well seasoned complete all as directed & shown on drawing.

TABLE 900x600x760MM WITHOUT DRAWER/ WITH DRAWER (Drg No. FD- 41(m), FD-42(m), FD-224,FD-283, FD-284 FD-291, FD-1008)

Taking out old unserviceable top of table 900x600x760mm without drawer/with drawers and supply & fixing new top made out of pre-laminated particle board exterior gde 18/19mm thick one side teak veneered & other side having balancing white laminated duly fixing with 19x4mm thick teakwood beading all around the top complete all as directed & shown on drawing.

Removing old unserviceable following components of table 900x600x760mm with or without drawer and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed & shown on drawing. :-

Legs (size 740x60x30mm)

Long rails (740x25x65mm)

Short rails ( size 440x25x65mm)

Back side rails (740x25x130mm)

S& F new drawer with Knob

Side rails (440x25x130mm)

TABLE DINNING 6 PERS (Drg No. FD-30(m), 239 & 273)

Removing old unserviceable top of table dinning 6 persons and supply & fixing new top made out of pre-laminated particle board exterior gde including 19x4mm teakwood beading all around the top complete all as directed & shown on drawing.

Removing old unserviceable legs of table dinning 6 persons and supply & fixing new legs of size 740x60x60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drawing.

Taking out old unserviceable long rail and supply & fixing new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drawing.

Same as per serial item No 9.03 here -in -before but short rail of table dinning 6 persons complete all as directed and shown on drawing.

CHAIR WB (Drg No. FD-285, 226)

Removing of old unserviceable following parts/components of chair WB w/o arm and supply & fixing the following new components made out of Ist class well seasoned teakwood complete all as directed and shown on drawing.:-

Front legs

Rear Legs

Side Rails

Rear/Front Rails

Stiffener Long

Stiffener short

Seat made of 6mm thick commercial plywood BWR Gde all as per drawing.

Back rest

BLANK

Polishing to all exposed wooden surface of following items of furniture with French polish ( to the entire satisfaction of Engr-in-Charge subject to minimum two coats) after necessary scrapping old stains, dirt complete all as directed by Engr-In-Charge and shown on drawing.:-

Side board

Chair office CB (DB-4124)

Chair dining (FD/16(m) & 279(m))

Chair writing ( FD-16(m) & 279(m)

Chair easy (FD-17(m), 229 )

Table writing (FD-33, 275)

Table 3' X 2' with/without drawer (FD-42(m), 283(m)

Teapoy (FD-34(m),278)

Table dining 6pers (FD-239, 30(m))

Table 3' x 3' (FD-291)

Chair wooden bottom (FD-225,285)

Table dressing gents with mirror (FD-31(m), 230)

Peg table (FD-285, 277)

Table bedside (FD-276 & 246)

Table centre (FD-39(m) 274)

Bed plywood top (FD-246)

Sofa Set 5/4 seater (FD-281)

Chair dining long back (FD-357)

Chair dining JCO's/OR's (FD/MAP-II/05)

Hat stand W/M

Stool dressing CB (FD-282)

Table 2'x2' (FD-284)

Table dressing ladies with mirror (Fd-251 & FD-32)

TABLE CENTRE (Drg No. FD-274, 29 (m) & 235)

Removing existing unserviceable top of Table Centre , and supply & fixing 18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing.

Removing old unserviceable following components of table Centre and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing :-

Long rails

Short rails

TEAPOY (Drg No. FD-278, 232)

Removing existing unserviceable top of Teapoy and supply & fixing 18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing.

Removing old unserviceable following components of Teapoye and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing. :-

Long rails

Short rails

PEG TABLE (Drg No. FD-277, 236, FD-25)

Removing existing unserviceable top of Peg Table and supply & fixing18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing.

Removing old unserviceable following components of Peg Table and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing:-

Long rails

Short rails

CHAIR DINING JCO's/OR's (FD/MAP-II/05)

Removing of damaged unserviceable parts of chair dinning and supply & fixing the following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing :-

Front legs

Side rails

Back rest

Rear legs

Stiffener long

Stiffener short

Rear/Front rails

Removing of old unserviceable plastic seat from chair dinning and supply & fixing new as per exesisting plastic seat complete all as directed & shown on drawing.

CHAIR DINING WITH LONG BACK (Drg No FD-357)

Removing of damaged u/s parts of chair dining with long back and S&F the following new parts/components made out of Ist class well seasoned teak wood free from knots, sapwood etc. complete all as specified and shown on drawing:-

Front legs

Side rails

Back rest

Rear legs

Stiffener of legs long

Stiffener of legs short

Rear/Front rails

Removing of old torn of u/s cushion seat and back rest cushion from chair dining with long back and S&F new cushion seat and back rest cushion complete all as specified and shown on drawing.

BLANK

ALMIRAH STEEL MED WITH SHELVES (Drg No. FD-67(m), 243,1032)

Taking out broken damaged handle of almirah steel med with shelves and S&F new brass chromium plated handle of approved quality (Godrej pattern) complete all as specified and directed.

Taking out old unserviceable locks from almirah steel med with shelves and S&F new brass locks of 6 levers with duplicate keys of approved quality complete all as specified and directed.

Taking out old u/s mild steel cleats and S&F new mild steel cleats as per existing size and shape complete all as specified and directed.

Repairs of door shutters hinges of almirah steel med with shelves by fixing dislocated hinges by welding. Length of each spot of welding exceeding 2.5 cm but not exc 5 cm, thickness of welding shall not be less than 6mm, with and including red oxide zinc chrome primer complete all as specified and directed.

Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of almirah steel med with shelves, with and including red oxide zinc chrome primer complete all as specified and directed.

Taking out unserviceable rusted shelves of almirah steel med with shelves and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed.

M&L for painting to the almirah steel med with shelves with synthetic enamel paint olive green (internally & externally) two coats by spray painting duly scrapping out old dirt stain etc complete all as specified and directed.

Taking out old unserviceable locking arrangement 3 way and supply & fixing new locking arrangement made out of 10mm dia rod of required length of Almirah Steel Med complete all as specified and directed.

ALMIRAH STEEL LARGE W/SHELVES (Drg No. FD-67(m), 243,1032)

All as per Item No. 19.01 above but almirah steel large.

All as per Item No. 19.02 above but almirah steel large.

All as per Item No. 19.03 above but almirah steel large.

All as per Item No. 19.04 above but almirah steel large.

All as per Item No. 19.05 above but almirah steel large.

All as per Item No. 19.06 above but almirah steel large.

All as per Item No. 19.07 above but almirah steel large.

All as per Item No. 19.08 above but almirah steel large.

TABLE OFFICE OFFICER STEEL (Drg No. FD-1003)

Removing old broken damaged top of table office officer steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with standard PVC edging all around the top complete all as specified and directed.

Removing old unserviceable internal drawer locks from table office officer steel and S&F new internal drawer locks 40mm 4 lever with duplicate keys of approved quality complete all as specified and directed.

Removing old broken unserviceable hard rubber shoes of table office officer steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing.

M&L for spray painting to table office officer steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

TABLE OFFICE CLERK STEEL (Drg No. FD-84)

Removing old broken damaged top of table office clerk steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and directed.

Removing old unserviceable internal cupboard/drawer locks from table office clerk steel and S&F new internal locks 40mm, 4 lever with duplicate keys of approved quality complete all as specified and directed.

Removing old broken unserviceable rubber shoes of table office clerk steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel complete all as specified and directed.

M&L for spray painting to table office clerk steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

LOCKER STEEL (Drg No. FD-257 & TD/SZ/229, FD-1029)

Removing old broken damaged hasp & staples of locker steel and S&F new hasp & staples of size 150 mm long chromium plated to the shutters of locker steel complete all as specified and directed.

Removing old broken handle of locker steel and S&F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel complete all as specified and directed.

Removing old broken hanging rod of locker steel and S&F new hanging rod made out of mild steel 20mm dia chromium plated pipe, 500mm long of locker steel complete all as specified and directed.

Removing old unserviceable locks of locker steel and S&F new locks 50mm, 6 lever with duplicate keys complete all as specified and directed.

M&L for spray painting to locker steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

All as serial item No 19.05 here-in before but legs of Locker steel.

TABLE DINING ORs (Drg No. FD-165(M)

Removing old broken damaged top of table dining ORs and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white, exterior grade with 19x4mm thick teakwood beading fixed with headless nails all around the top complete all as specified and directed.

Taking out old unserviceable rusted components of table dining ORs and S&F the following new components 25mm square tube of 1.6mm thick MS sheet:-

Legs of table dining ORs 71 cm long

Long side rails of size 162cm long.

Short side rails of size 52 cm long.

Stiffener of size 47 cm long.

Stiffeners of size 158cm long.

M&L for running electric welding to the broken/dislocated broken frame of table dining Ors, length of welding exceeding 2.5cm but not exc 5 cm in length and thickness of metal to be welded not less than 6mm, complete all as specified and directed.

M&L for spray painting to all steel surface of table dining ORs with two coats of synthetic enamel black paint including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

CHAIR CBTS WITH ARMS (Drg No. FD-75(m)

Removing of old broken damaged wooden hand rest of chair CBTS with arm and S&F new hand rest made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish complete all as specified and directed.

Removing of old broken damaged seat frame of chair CBTS with arm and Supply and fixing new seat frame made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish with and including canning with new non-recycled 2mm wide white plastic cane half round oval shaped and beading with 3mm wide plastic cane half round, as per Godrej pattern (double vertical and single diagonal) complete all as specified and directed.

All as per item no 25.02 above but back frame of chair CBTS with arm

M&L for spray painting to steel frame of chair CBTS with arm with two coats of synthetic enamel paint olive green including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

Removing of old unserviceable rubber shoes from chair CBTS with arms & S&F new rubber shoes of approved quality & fixed at the bottom of legs with screw of chair CBTS with arms complete all as specified and directed.

Removing of old rusted flat iron strip and S&F mild steel FI strip of size 500mmX20mmX3mm & welded to the frame(at bottom) of chair CBTS with arms complete all as specified and directed.

CHAIR CBTS WITHOUT ARM (Drg No. FD-75(m)

All as per item No 25.02 here-in before but seat frame of chair CBTS without arm

All as per item No 25.03 here-in before but back frame of chair CBTS without arm.

All as per item No 25.04 here-in before but painting to steel frame of chair CBTS without arm.

All as per item No 25.05 here-in before but chair CB TS without arm .

All as per item No 25.06 here-in before but chair CB TS without arm .

TABLE 900 X900 X 760 MM STEEL (Drg No. FD-1009)

Removing of old unserviceable top of table 900 x900 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19mm x 4 mm teak wood beading all around the top and polishing to wooden surfaces with French polish including preparation of surfaces by scrapping /smoothing the surface complete all as specified and directed.

M&L for spray painting to steel frame of table 900 x900x 760 mm steel by two coats of synthetic enamelled paint olive green colour including preparation of old painted surfaces by scrapping out old dirt stains etc complete all as specified and directed.

M&L for electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not less than 6 mm , complete all as specified and directed.

Removing old unserviceable rubber shoes from the legs of table and S&F new rubber shoes of approved quality and tightly fitted to the bottom of legs complete all as specified and directed.

TABLE 900 X600 X 760MM WITH/ WITHOUT DRAWER STEEL (Drg No. FD-1007 & FD-1008)

All as per item no. 27.01 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 27.02 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 27.03 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 27.04 here-in-before but for table steel 900x600x760mm with drawer.

BLANK

BLANK

Charpoy IP HARD TOP ( Drg No.- FD Map-II/01 )

M&L for spray painting for Charpoy IP Hard Top after finishing the surface with one coat of synthetic enamel Black paint complete all as specified and directed.

Taking out old and unserviceable plywood top and S & F new plywood top 12mm thick(7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube and plywood complete all as specified and directed.

Charpoy plywood top GI pipe 32mm with (Drg No.- FD-220)

Taking out old unserviceable long rails from charpoy GI Pipe and S&F new rails made out of 32 mm dia medium grade GI Pipe duly threaded at both ends and fixed complete all as specified and directed.

Taking out old unserviceable short rails from charpoy GI Pipe and fixing only of short rails made out from old long rails obtained from Serial Item No 32.01 above duly threaded at both ends fixed complete all as specified and directed.

Taking out old unserviceable legs from charpoy GI Pipe and fixing only legs made out from long rails and short rails obtained from serial item No 32.01 & 32.02 complete including welded MNF Set clamps of mild steel flat iron 25mmX3mm & 6mm thick MS plate at the bottom of legs complete all as specified and directed.

Taking out old unserviceable GI elbow from charpoy GI Pipe and S&F new GI Elbow 3-way 32mm dia medium grade ISI Marked complete all as specified and directed.

Taking out old unserviceable GI check nuts from charpoy GI Pipe and S&F new GI check nuts 32mm dia medium grade ISI Marked complete all as specified and directed.

Removing of existing unserviceable plywood top from charpoy GI Pipe, supply and fixing of new 12mm thick(7 Ply) Plywood, BWR grade ISI Marked as per existing size and shape complete all as specified and directed by Engr-in-charge.

M & L for gas welding to the mild steel stiffener attached to the frame of charpoy G.I pipe with plywood top including preparation of surface and removing unwanted welding spot all as directed by Engr-in-Charge.

SOFA SET 3 SEATER (Drg No. - FD-281)

Removing of old density less foam cushion of sofa set and supply & fixing of new polyurethane foam cushion 550x525x100mm thick 32/33 density duly covered with upholsty fabric/ tapesty cloth not less than Rs 300/- per meter, with provision of zipper, approved shade/ texture complete all as directed by Engr-in-Charge & shown on drawing.

Removing of old broken damaged hand rest of sofa set 3 seater and supply & fixing new hand rest made out of well seasoned 1st class teakwood complete all as directed & shown on drawing.

All as per item No 33.02 above but for front/ back long rail for seat of sofa set 3 seater

All as per item No 33.02 above but for side rail for seat of sofa set 3 seater

All as per item No 33.02 above but for long rail for back frame of sofa set 3 seater

All as per item No 33.02 above but for side rail for back frame of sofa set 3 seater

All as per item No 33.02 above but for siffener for back/ seat of sofa set 3 seater

Removing of old broken damaged leg of sofa set 3 seater and supply & fixing new legs made out of 65x65x150mm well seasoned teak wood complete all as specified and shown on drawing & directed by Engr-in-Charge.

SOFA SINGLE SEATER (Drg No. - FD-281)

Removing of old density less foam cushion of sofa Single seater and supply & fixing of new polyurethane foam cushion 550x525x100mm thick 32/33 density duly covered with upholsty fabric/ tapesty cloth not less than Rs 300/- per meter, with provision of zipper, approved shade/ texture complete all as directed by Engr-in-Charge & shown on drawing.

Removing of old broken damaged hand rest of sofa Single seater and supply & fixing new hand rest made out of well seasoned 1st class teakwood complete all as directed & shown on drawing.

All as per item No 34.02 above but for front/ back long rail for seat of sofa single seater

All as per item No 34.02 above but for side rail for seat of sofa single seater

All as per item No 34.02 above but for long rail for back frame of sofa single seater

All as per item No 34.02 above but for side rail for back frame of sofa single seater

All as per item No 34.02 above but for siffener for back/ seat of sofa single seater

Removing of old broken damaged leg of sofa Single seater and supply & fixing new legs made out of 65x65x150mm well seasoned teak wood complete all as specified and shown on drawing & directed by Engr-in-Charge.

CHAIR VERANDAH (Drg No. - FD-256, FD-359)

M&L for electric welding in repair of dislocated 10mm dia MS rod to legs, length of welding exceeding 2.5cm but not exceeding 5 cm and thickness of metal to be welded not exceeding 6mm complete all as specified and directed. Note:- Each spot of welding shall be measured as one unit.

Taking out old unserviceable/damaged plastic cane from chair verandah and M&L for painting of old painted steel surface of frame of chair verandah with two coats of synthetic enamel paint and recanning the chair verandah with 4mm oval shaped half round white plastic cane complete all as specified and directed.

Removing of old unserviceable rubber shoes from chair verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and directed.

BOX KIT STEEL (Drg No. - FD-98 (M))

Taking out old unserviceable hasp & staple from box kit steel and S&F new hasp & staple 150x3mm thick of approved quality complete all as directed and shown on drawing.

M&L for spray painting to box kit steel internally and externally with two coats of synthetic enamel black paint including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

BED HARD STEEL MAP-II (Drg No. - FD/E6/MAP/08®)

Taking out old unserviceable 18/19mm thick prelaminated particle board BWR exterior grade of melamine faced, flat pressed, 03 layered, ISI Marked, both side teak finished shall be screwed to MS strip of size 20x45x5 mm thick to be welded with 18mm MS square pipe from Head and foot board and fixing as existing. complete all as specified and directed.

M&L for spray painting for Bed Hard Steel after finishing the surface with two coats of synthetic enamel Black paint complete all as specified and directed.

Taking out old and unserviceable plywood top and S&F new plywood top 12mm thick (7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube. complete all as specified and directed.

TABLE COMPUTER (Drg No. - FD/E6/MAP/03)

Removing old unserviceable and fixing new frame of computer table made of 25mm square MS pipe wall thickness 1.6mm having bottom support made out of 25 x 50mm rectangular MS pipe of wall thickness 1.6mm. Complete all as specified and directed.

Removing old u/s top, sides, shelves, drawer and tray with 18mm thick pre-laminated particle board and fixing the new as existing. Complete all as specified and directed.

Removing Old u/s nylon buffer legs and fixing new as existing. Complete all as specified and directed.

CHAIR COMPUTER/CHAIR REVOLVING EXECUTIVE (DRG NO - FD/MAP-II/02,TP)

Removing damaged existing foam cushioned seat of chair computer and supply & fixing of new as per existing complete all as specified and as directed.

Removing damaged existing foam cushioned back of chair computer and supply & fixing of new as per existing complete all as specified and as directed.

Removing damaged existing PU arm rest of chair computer and supply & fixing of new as per existing complete all as specified and as directed.

Removing damaged existing Tilt Mechanism & Gas Lift height adjustment of chair computer and supply & fixing of new as per existing complete all as specified and as directed.

Removing damaged existing MS base & wheel of chair computer and supply & fixing of new as per existing complete all as specified and as directed.

TABLE BEDSIDE STEEL (DRG NO- FD/E6/MAP/15®)

Removing old unserviceable prelaminated particle board with all ends and fixing new as existing complete all as specified and directed.

Removing old pull out tray with its handle and telescopic channel and fixing new as existing complete all as specified and directed.

Removing old unserviceable 20x25cm Hardwood stopper and fixing new as existing complete all as specified and directed.

Removing old unserviceable all 18mmx18 guage square pipe and fixing new as existing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (DRG NO FD-251, FD-32 (M)

Removing of broken/damaged backside plank of table dressing gents and supply & fixing new back side plank made out of well seasoned teak/shisham wood including 2 nos key plate complete all as directed and shown on drawing.

Removing of broken/damaged top of table dressing gents and supply & fixing new top of table dressing gents made out of 12 mm thick pre-laminated particle board complete all as directed and shown on drawing.

Removing of broken/damaged bottom plank of table dressing gents and supply & fixing new bottom made out of well seasoned teak/shisham wood complete all as directed and shown on drawing.

Removing of old broken damaged side of table dressing gents and supply & fixing new sides made out of 12 mm thick pre-laminated particle board one side teak veneered complete all as directed.

Removing of broken damaged knobs of table dressing gents and supply & fixing new chromium plated 35 mm round knob of approved quality complete all as directed and shown on drawing.

Removing of damaged mirror of table dressing gents and supply & fixing new mirror of size 380x760x5.5 mm thick complete all as per drawing. (Make: Swastik/Gold fish/ Saint Gobain/Modi Guard)

Removing of broken damaged back plywood of mirror of table dressing gents and supply & fixing new plywood BWR gde 6mm thick including fixing of two nos of keys plate complete all as directed and shown on drawing.

Removing of broken damaged drawer of table dressing gents and supply & fixing new drawers made out of well seasoned/shisham wood including all components complete all as directed and shown on drawing.

TABLE DRESSING LADIES WITH MIRROR (DRG NO FD-251, FD-32 (M)

Removing of damaged mirror of table dressing ladies and supply & fixing of new 5.5 mm thick mirror of size 355mm long and 1220 mm high fre from distortion and other defects Make- Modiguard/Swastik/Atul with 6mm thick ply back and frame as per drawing complete all as directed.

Removing damaged drawers of table dressing ladies and Supply & fixing new as per drawing with proper fittings of knobs complete all as specified in drawing and directed.

Removing damaged side of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

Removing damaged back of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

Removing damaged glass shutters of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

Removing damaged long stiffener of leg frame of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

Removing damaged short stiffener of leg frame of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

Removing damaged leg with frame of table dressing ladies and Supply & fixing new as before complete all as specified in drawing and directed.

TABLE 600X600X760MM WDN (DRG NO- FD- 284)

Removing old unserviceable top of table 600x600x760mm and supply & fixing new top of 18/19 mm pre-laminated particle board phenol formaldehyde exterior grade with 19x4mm teakwood beading all around the top complete all as directed and shown on drawing

Removing the following broken/damaged components/parts of table 600x600x760mm and supply & fixing new components as under made out of 1st class well seasoned teakwood complete all as directed and shown on drawing:-

Leg of size (60x35x760mm long)

Top rail of size (75x25x600mm long)

J.S.M. FURNITURE

M/S BHARAT CONSTRUCTION

M/S S.B. CONSTRUCTION

M/S K P S CONSTRUCTIONS

SRI SURAJIT SENGUPTA

M/s. STRUCTURES INDIA

SHRI M K SAHA