MID/AN/115

1. Gate on RD 210:-Restoration / strengthening of gate of size 4’6” x 2’6” by way of extraction outside the frame using chain pulley block, tripod stand & manual labour, at site of installation. Repairs to 3T winch machine by way of providing / fixing of new set of gears, and base plate. Repairs of the gate leaf by way of Patch welding of leaf with new MS sheet 6mm thick in place of the old rusted sheet. Re-installation of the gate inside the groove after complete reconditioning. Complete painting of the entire gate by applying enamel paint. 2. Gate (D-1):-Restoration / Strengthening / Replacement of components of the gate of size 4’ x 2’6” by way of gas cutting of old rusted bottom channel of size 3” x 1.5’’. Repairs to 3T winch machine by way of providing / fixing of new machined stem rod and rain pipe, replacement of internal gear system. Replacement of the fasteners, re-installation of the gate inside the groove after complete reconditioning. Providing / laying of cement concrete for anchoring of the gate top channels for securing it properly. Complete painting of the entire gate at site with enamel paint. 3. Gate on RD 672:Restoration of the gate of size 5’ x 3’ by way of providing / fixing of new set of gears, machined stem rod to Winch machine. Repairs of the gate leaf by way of gas cutting of outer frame rusted / damaged side channel of size 3” x 1.5’’, Replacement of the same by P/F of new channel and welding of the same precisely for smooth operation of the leaf, providing / fixing of new rubber seal on the bottom of the leaf, re-installation of the gate inside the groove. Complete painting of the entire gate at site with enamel paint. 4. Gate on RD 889:Extraction of the gate of size 5’ x 3’ outside the frame using chain pulley block, tripod stand & manual labour, for restoration / strengthening / reconditioning. Repairs of the gate by way of providing / fixing new stem rod, gears, bearing to 3T winch machine. Re-installation of the gate inside the groove, greasing, Complete painting of the entire gate at site by enamel paint. 5. Escape Gate on RD-1175Repairs to escape gate of size 8’6” x 7’6” by way of p/f of bearing to winch machine of 5Ton capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges(skilled/semiskilled/unskilled), head load, hire charges of tool and tackles, transportation charges, welding equipments (Mobile Gen. Set) Etc. 6. Gate ( D-2 ):Strengthening/Reconditioning of regulatory gate of size 5’x3’.8” by way of p/f of bearing to winch machine of (3T) capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Repair to leaf 5’x3’.8” by patch welding of new MS sheet 6 mm thick (half sheet) after removal of damaged, rusted portion. Assembly of the gate at site, application of grease on all sliding portions. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges, hire charges of tool and tackles, transportation charges.7. Gate ( D-3 ):Repairs to vertical regulatory gate of size 4’.3” x 3’9” by way of p/f of bearing to winch machine of 3Ton capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges(skilled/semiskilled/unskilled), head load, hire charges of tool and tackles, transportation charges, welding equipments (Mobile Gen. Set) Etc. 8. Gate on RD 3730:Restoration of the gate of size 4’.7” x 2’.8” by way of repairs of the gate, p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments. 9. Gate D-4 : Restoration / Strengthening / Replacement of components of the gate of size 4’ x 2’ by way of gas cutting of old rusted bottom channel. P/F of new channel. Repairs to 3T winch machine by way of providing / fixing of new machined stem rod and rain pipe, re-installation of the gate inside the groove after complete reconditioning. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job involving material cost, labour charges for (skilled/semiskilled/unskilled), hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments. 10. Gate on RD-4600:Repairs/Restoration of gate of size 3’ x 2’ by way of providing / fixing of gears and bearings to winch machine of 3Ton capacity as per sample along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Anchoring of the top channels for holding of winch machine with the gate frame and then laying of cement concrete block on the top of both sides of gate to work it properly. Re-installation of the gate inside the groove after repairs. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges, hire charges of tools and tackles, transportation charges Etc. 11. Gate on RD 5200:-Repair/Extraction of the gate of size 6’.8” x 3’.4” outside the frame using chain pulley block, tripod stand & manual labour, for p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments.

Vaibhav Engineers and Technocrates (BID ID -2342743)

GEETA ENGINEERING MECH WORKS (BID ID -2342762)