Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC | ₹4.9 L | L1 | Accepted-AOC AOC |
| 2 | L2₹5.0 L+₹9,751.20 (1.98%)Rejected-Finance | ₹5.0 L+₹9,751.20 (1.98%) | L2 | Rejected-Finance 2nd Lowest |
| 3 | Rejected-Technical H NO 26 HB COLONY SHIMLA DISTT SHIMLA 1 | SHIMLA | HIMACHAL PRADESH | 171001 | - | - | Rejected-Technical no |
Tender Value
Refer Docs
EMD Value
₹9,800
Closing Date
20 Aug 2026, 10:00 amClosed
Executive Engineer kasumpti Division HPPWD Shimla3
Executive Engineer kasumpti Division HPPWD Shimla3
P/F Cupboard in Type II set no. 628,630, Type-1, 219 and white washing and distempering in various sets due/ vacation under Kasumpti Sub- Division
2026_PWD_140938_1
SD-I-CTR-Tender-26- 14308 dt 10-08-2026
Open Tender
Civil Works
Percentage
30 days
kasupti
As per SBD
13 documents required · 13 mandatory
₹350
₹9,800
12 Sept 2026
12 Aug 2026
20 Aug 2026
12 Aug 2026
20 Aug 2026
12 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing 19mm thick water proof commercial board in box /shutters for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. | 1 | Per Square Meter | 1,450 | ₹1,448.55 |
| 2 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails etc complete, including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. | - | Per Square Meter | 950 | - |
| 3 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick. | - | Per Square meter | 750 | - |
| 4 | Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood. | - | Per Running Meter | 80 | - |
| 5 | Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. | - | Each | 60 | - |
| 6 | Providing and fixing bright finished brass handles with screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre) | - | Each | 200 | - |
| 7 | Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. | 1 | Per Square Metre | 40 | ₹39.96 |
| 8 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint. | 1 | Per Square Metre | 75 | ₹74.93 |
| 9 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 2nd class Marindi wood | - | Per Cubic Metre | 1,20,000 | - |
| 10 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. | - | Per Square Metre | 300 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.99 MB
SBD487560.pdf
Tender Documents • 7.00 MB
BOQ_209146.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .