REPAIR, RECANING, PAINTING AND POLISHING OF VARIOUS WOODEN FURNITURE AT HQ 2WING AND 9BRD UNDER GE (AF) LOHEGAON AT AIR FORCE STATION PUNE

Amount

NOTE: Applicable for Ser Item No. 1.00 to 24.00 A) Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact and painting / polishing the disturbed portion, as applicable as per drgs. B) Work will be executed where the furniture exist in different User Units of GE(AF) LOHEGAON including BSO's Furniture Yard as directed by Engineer-in-Charge.

Table 3'X2' or 900X600mm with/ without Drawer : FD-55/284/224/41(M)

Top with 18/19mm prelaminated board Ext Gde with 4 mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

Legs as per drg

Long rail as per drg

Short rail as per drg

Long Stiffener as per drg

Short stiffener as per drg

Drawer as per drg

Peg Table : FD-384/277/236

Top with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE.

Legs as per drg

Long rail as per drg

Short rail as per drg

Table Centre : FD-274 / 235/29

Top with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE.

Legs as per drg

Front/Rear Rail as per drg

Side Rail as per drg

Teapoy : FD-278, 232, 382, 343(M)

Top with 18/19mm prelaminated Particle board Ext Gde with 4 mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE.

Front Rail as per drg

Legs as per drg

Side Rail as per Drg

Stiffner as per Drg

Chair Dining FD-69/228

Removing existing U/S cane, closely weaven with new white virgin half round cane of 2 mm width, 0.40mm thick and border of 3.5 mm width and .50 mm thick complete as per direction of EIC/GE.

Front Leg as per drg

Back/Rear Leg as per drg

Leg Stiffner as per drg

Front/Rear/side Rail as per drg

Back Stiffner as per drg

Chair Writing FD-280 /250/20

Removing existing U/S cane, closely weaven with new white virgin half round cane of 2 mm width, 0.40mm thick and border of 3.5 mm width and .50 mm thick complete as per direction of EIC/GE.

Front Leg as per drg

Back/Rear Leg as per drg

Leg Stiffner as per drg

Front/Rear/side Rail as per drg

Back Stiffner as per drg

Armrest as per drg

Chair Easy FD-229/17

Removing existing U/S cane, closely weaven with new white virgin half round cane of 2 mm width, 0.40mm thick and border of 3.5 mm width and .50 mm thick complete as per direction of EIC/GE.

Front Leg as per drg

Back/Rear Leg as per drg

Front/Rear Rail of seat frame as per drg

All types of rail of back frame as per drg

Side Rail of seat frame as per drg

Armrest as per drg

Table Dining 6 pers FD-273

Top with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

Triangular wooden bracket 100mmx100mmx20mm thick

Legs as per drg

Long rail as per drg

Short rail as per drg

Table Dining 8 pers FD-273

Top with 18/19mm prelaminated Particle board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

Triangular wooden bracket 100mmx100mmx20mm thick

Legs as per drg

Long rail as per drg

Short rail as per drg

Table writing FD-275

Top with 18/19mm prelaminated Particle board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

Legs as per drg

Foot rest as per drg

Stiffner as per drg

Sides of cabinet with 18mm thick ply wood with 1.5mm thick lamination as per drg

Short Rail as per drg

Front/Long Rail as per drg

Drawer as per Drg

Cabinet Door with locking system

Table bed side FD-276/248

Back ply of 6mm as per drg

Shelf with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE.

Side plank with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE.

Top with 18/19mm prelaminated Particle board Ext Gde with 4mm thick teakwood beeding. Colour/shade of Prelaminated Particle Baord will be approved by Engineer-in-Charge/GE

Stool CB Dressing FD-252/282

Canning in full as per drg

side rail as per drg

Long Rail as per drg

Leg as per drg

Chair Dining with cushion FD/E6/MAP/10

Removing existing U/S seat cushion and tapestry. S&F new seat cushion (Make: Curlon/sleepwell/dunlup) and tapestry cloth not less than Rs 250/- PRM as per drg and complete all as specified and directed by EIC/GE.

Removing existing U/S Ply of seat. S&F new Ply 12mm thick MR (Make: Greenply, Century, Archidply) as per drg and complete all as specified and directed by EIC/GE.

Replacement of Front leg as per drg

Replacement of Rear leg as per drg

Replacement of Stifner as per drg

Replacement of front/rear/side Rail as per drg

Replacement of Rear verticle strips as per drg

Locker Wooden FD-54,222

Door shutter with 18/19mm thick prelaminated particle board

Stainless steel Handle 100mm long as per drg

Stainless steel Hasp & Staple as per drg

CP Hanging rod 19/20mm dia

5.5/6mm thick back ply as per drg

Leg as per drg

Continuous Piaono Hings as per Drg

Sofa set 5/4/3/1 seater with Arms FD -281

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover as per adequate size made out of approved tapestry cloth not less than Rs 250/-per mtr of duly stiched with fine thread and openable with good quality chain from one side complete all as specified and directed by EIC/GE

Replacement of U/SFront/Rear Leg as per Drg

Replacement of U/S Batten of seat and back as per Drg

Replacement of U/S Arms as per Drg

Replacement of U/S front/rear/side rail of single seater of as per Drg

Replacement of U/S front/rear rail of 3 seater of as per Drg

Taking out old Unserviceable Cushion and Supply & Fix new cushion make Sleepwell/ Kurlon/Dunlop 40 density of size as per drg . New cushion is to be insert under cover supplied at item 13 (a) . All as directed by EIC/GE.

Replacement of U/S side rail of 3 seater of as per Drg

Sofa set 5 seater with Arms FD-258

Opening & Taking out old Unserviceable seat Cushion cover and Supply & Fix new seat cushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of duly stiched with fine thread all as specified and directed in respective drgs.

Opening & Taking out old Unserviceable back Cushion cover and Supply & Fix new back coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

Removing existng u/s cushion. Supply and fixing new cushion of 40 density ( Make: kurlon/sleepwell/dunlop) complete all as specified and shown on Drg and as directed.

Replacement of U/SFront/Rear Leg as per Drg

Replacement of U/S seat ply of single seater as per Drg

Replacement of U/S seat ply of 3 seater as per Drg

Replacement of U/S Arms as per Drg

Replacement of U/S front/rear/side rail of single seater of as per Drg

Replacement of U/S front/rear rail of 3 seater of as per Drg

Replacement of U/S side rail of 3 seater of as per Drg

Replacement of U/S Back Batten of sofa set 3 seater as per drg

Replacement of U/S Back Batten of sofa set single seater as per drg

Side Board FD-241/371/26(M)

Back ply as per drg

Door shutter as per drg

Drawer as per drg

Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg

Leg as per drg

Bed Plywood Top / Hard Bed FD-246/ 247

Long rail as per drg

Short rail as per drg

Foot Board as per drg

Head Board as per drg

Stiffeners as per drg

Removing old U/S plytop. S&F 12mm thick BWR grade (IS-303) marked plywood as per drg. Make-Greenply, Century, Archidply

Removing existing U/S veneer ply and beading. S & F 4mm Thick venner and beading of Foot Board and Head Board. (Make : Make-Greenply, Century, Archidply) as per the drg complete all as specified and directed by EIC/GE.

Cot with ply top DB-3971

Long rail as per drg

Short rail as per drg

Foot Board as per drg

Head Board as per drg

Stiffeners as per drg

Removing old U/S plytop. S&F 12mm thick BWR grade (IS-303) marked plywood as per drg. Make-Greenply, Century, Archidply

Book Case FD-45M/237

Base Leg as per drg

Back ply as per drg

TOP ply as per drg

CP Knob as per drg

Base/Bottom ply as per drg

Removing of existing U/S Nobe from Various type of wooden furnitures, S&F new Nobe as and where reqd and as per direction of Engr-in-Charge.

Replacement of U/S PVC shoes of all types of wooden Chairs,Tables, Stool CB Dressing and Sofa Set and Supply and Fix new PVC Shoes as per drg.

M&L for french polishing of two coat to the fwg furniture arcticles of all pattern viz F/DB/FD/TP/Series or similar items incl preparation of surface with scrubbing/rubbing with emery paper/sand paper to erase/remove all old polish and making surface smooth by applying wax/ putty on all depressed portion upto the satisfaction of Engineer-in-Charge.

Chair Dining

Chair Writing

Chair easy

Peg table

Table 900x600mm with/without Drawer

Teapoy

Table dining 6/8 pers

Table Centre

Table writing

Table bed side

Stool CB dressing

Chair dining cushioned

Locker Wooden

Sofa Set 5/4/3/1 seater

Side board

Bed plywood top

Cot with ply top

Book Case

NOTE (Applicable to Ser. Item No. 1.00 to 23.18):-Work will be executed where the furniture exist in different User Units of GE(AF) LOHEGAON including BSO's Furniture Yard as directed by Engineer-in-Charge.

KAMINS CARE