Providing Tar patch work at new jail road sivanantha salai puttuthoppu in ward 56

Amount

Preparing the Existing surface to laying the road to proper Gradient and remove the loose soil with out damage the water supply pipe . The rate including of all charges success earth work and remove the same 2km away from the site etc complete as per specifications.

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Provding and Laying Prime coat of 7 Kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V specifications R.D 23-24 P.No.11

Providing and laying tack coat of 2.50 kgs/10 sqm over the prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charger for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications R.D 23-24 P.No.11

Providing laying Bituminous Concrete to 30mm / 40mm thick using 0.13cum of 19.00-9.50mm 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG 30/VG40bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, 10sqm including cost adn coveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity conveying the mix by tipper trucks to paver site spreading the mix to uniform thickness 40mm with mechanic paver to the specified grades and cross section and consolidated by 8-10 ton vibratory / Pneumatic roller to the required density etc inclluding labour attaending to Paver to site etc. including hire charges for 20-30 CMP with bitument bitumen Boiler tipper truck, Paver finisher / 9m Paver finsiher vibratory / Pneumatic rooler and all other tools and plant required including fuel all other incidential charges etc complete as per Specification using CMP as Per clause 507 of MORTH Rev5

Add GST 18%

BAVITHRA BUILDERS (BID ID -1115424)