Road construction work by Hotmix Plant from B1 to B4 in Ward No. 32 DM Compound.

M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work

12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work

Cement Concrete with 2.0 cm. gaug;e Approved stone grit coarse sand & cement in the proportion of 4:2:1 including supply of all material labour tools and plant etc required for proper completion of work

Supply and stacking 53mm to 22.4mm size stone aggregate.

consolidtion of stone ballast by hand rammer i/c opening out stacks sorting kankar into three sizes,repairing patches in existing road surface with kankar making medhi to retain water and ramming and also i/c carriage of metal upto 30 mtr carriage of water 200 mtr supply and maintenance of barriers and all tools and plants required for proper completion of work ,kanker to be supplied to the contractor free at site but upto 10cm loose thick coat but excluding roller charge

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.

Providing & laying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 KG per sqm on the prepared bituminous surface cleaned with mechanical broom

Providing and laying bituminous concrete with higer capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 Per cent of mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tandom rollers to achieve the desired compaction as per morth Specification No 507 complete in all respacts

Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms /sq.mt. area . Thickness of 2.5 mm inclusive of surface applied glass beads as per I.R.C uniform and free from steaks and holes.

Reflective raised pavement marker with shanks providing and fixing of raised pavement marker with twin shanks of adequate length anchored with epoxy/bitumin adhasive of approved make (cat eye) type x-ASTMD-4956-04 Avery dennision /3 m(USA MAKE) HEAVY molded body of poly carbonate ,ASA,HIPS ORABS Able to support a load of 13.665MT as per given morth circuler no RW/NH33023/10/97/DO-III dated 11.6.1997