Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.9 LAccepted-AOC 117 LENIN SARANI KOLKATA 700 013 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700013 | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹43.2 L+₹4.1 L (10.5%)Rejected-Finance 91 2 MITRA PARA ROAD NAIHATI DIST NORTH 24 PARGANAS PIN 743 165 WB | NAIHATI | NORTH 24 PARGANAS | WB | 743165 | 2 | Rejected-Finance NOT L1 BIDDER | |
| 3 | 3₹43.8 L+₹4.7 L (12.2%)Rejected-Finance 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | 3 | Rejected-Finance NOT L1 BIDDER | |
| 4 | 4₹43.8 L+₹4.8 L (12.2%)Rejected-Finance 87 MARIUM MAHAL SADAR BAZAR BARRACK PORE 24 NORTH PGS | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | 4 | Rejected-Finance NOT L1 BIDDER | |
| 5 | 5₹43.8 L+₹4.8 L (12.3%)Rejected-Finance 15 JOGENDRA NATH GHOSAL ROAD P S BELGARIA KOLKATA 700 057 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700057 | 5 | Rejected-Finance NOT L1 BIDDER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
6 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA
SPL REPAIR TO BLDG NO J 02 FAFA JCOS MD ACCN AT 2 CBPO UNDER GE NORTH KOLKATA
2022_MES_569649_1
8207/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
2 CBPO
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹70,000
Yes
24 Jan 2023
16 Dec 2022
7 Jan 2023
17 Dec 2022
6 Jan 2023
30 Dec 2022
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof, ceiling, louvers, parapet, column, beam and lintel by hammering with wooden mallets carefully chipping off the old concrete surface and necessary scaffolding if required including cutting of rusted reinforcement if so required, cleaning the surface thoroughly by using wire brush, emery paper etc including cleaning all around the reinforcement by any means as required and applying alkaline rust removing chemical including preparation of surface completely for applying bonding agent and disposal of debris to outside the premises complete all as specified and as directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT bar 5mm dia and over upto and including10mm dia as in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending etc and lapping, welding as directed to the existing one complete all as specified and as directed.
M & L for providing single coat of epoxy bond adhesive to prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm, complete all as specified and directed by Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply and application of epoxy zinc rich primer to the prepared steel surface by brush, the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. (Make : SIKA/FOSROC or any other equivalent as approved by GE )
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade M 50 to the effected beam, column etc. The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed by Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply, mixing and application two component structural grade polymer modified reinstatement mortar upto 25 mm average thickness, where local spalling has taken place or shuttering is not possible.The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed by the Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
M & L for use and waste of formwork to sides and soffits of beams, lintels etc. for rough finished concrete surfaces complete all as specified and as directed.
M & L for use and waste of formwork to parapet, staircase railing and similar items for rough finished concrete surfaces complete all as specified and as directed.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed
M & L for use and waste of formwork to fins, facia, chajja etc for rough finished concrete surfaces complete all as specified and as directed
Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for glazed ceramic colour tiles 350x 250x 7mm/ 450X 350X 7mm in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and as directed.
Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing serviceable pipe for reuse complete all as specified and as directed.
All as per item No. 23 above but 20mm dia complete all as specified and as directed.
Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.
All as per item No. 25 above but 20mm dia complete all as specified and as directed.
All as per item No. 25 above but fixing only. (Note: Serviceable GI pipe obtained from item No. 23 above shall be reused)
All as per item No. 26 above but fixing only. (Note : Serviceable GI pipe obtained from item No. 24 above shall be reused)
Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.
Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair 10 litre capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and polyethylene or PVC flush pipe of low or high density, 32 mm dia, including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.
Supply and fix in repair machine cut cudappa stone slab, 18 to 20mm thick, as in cooking platform set or embedded on 20mm thick screed bed in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding edges, rubbing and polishing complete all as specified and as directed.
Supply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 410x330x160mm complete all as specified and as directed (Make: Model No.BSSBSD-52 of Blue Star or equivalent).
Supply and fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding complete all as specified and as directed.
Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 450 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap, chain & plug and porcelain stopper etc. complete all as specified and as directed.
Supply and fix in repair 75mm dia over head shower of PTMT (Minimum weight 40gms) any colour for fixing with 15mm pipe complete all as specified and as directed.
Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 gm) complete all as specified and as directed.
Dismantling cast iron drain pipes 100mm, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)
Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.
Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.
Fixing only cast iron soil waste and vent pipes of 100mm bore in any lenth with or without ears with cement joints fixed to walls complete all as specified and as directed. (Note :- Serviceable pipe obtained from item No. 43 shall be reused).
Supply and fix PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with PVC clip including taking down existing rain water pipes complete all as specified and as directed.
Supply and fix PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.
Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed
Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.
Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.
Taking down wooden chowkhats or frames not exceeding 1.5 Sqm each including wire mesh complete all as specified and as directed.
All as per item No. 50 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.
All as per item No. 52 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Taking down shutters of any description exceeding 1 Sqm but not exc 2sqm each complete all as specified and as directed.
Refixing of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each after necessary repair work complete all as specified and as directed. (Note : (i) New builders hard ware articles shall be measured and paid separately under “Supply only item. (ii) Old serviceable shutter obtained from item No 54 shall be reused).
Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
Material and labour for treating ends of posts, backs of chowkats, etc., with tar or coal tar black paint area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.
Supply and fix 35mm thick, 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.
Supply and fix powder coated of any colour, aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
Supply and fix sliding powder coated of any colour, anodised aluminium window and ventilator shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)
Supply and fix powder coated of any colour, anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)
Supply and fix 4mm thick sheet glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.
Supply and fix 4mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to wooden frame complete all as specified and as directed.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.
Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.
Supply and fix 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door complete all as specified and as directed.
Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized complete all as specified and as directed.
Supply & fix Decorative /Fancy type curtain rod of length not exceeding 1.50 m of Aluminium /brass alloy, 25 mm dia alongwith fancy type brackets and fixtures including taking down pelmet box with old curtain rod complete all as specified and directed
Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed.
Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.
Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.
Material and labour for one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
All as per item No. 82 above but in ceiling complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coat of cement base paint over a coat of cement primer complete all as specified & directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper over a coat alkali resistant primer on wall etc complete all as specified and as directed.
Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.
All as per item No. 88 above but in ceiling complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar works in ground floors (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar works (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Material and labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for brick work with sub class B bricks, class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L Hardcore of gauge exc.63mm but not exc.100mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered/rammed to a true surface complete all as specified and directed.
Material & labour for providing 40mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor etc finished the surface even and fair complete all as specified and as directed
Material and labour for 75mm thick PCC (1:4:8) type D2 using 40mm garded stone aggragate as in foundation, filling, sub base of floors etc complete all as specified and as directed.
Material & labour for 40mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor, laid in bays, finish the surface even and smooth using extra cement complete all as specified and as directed
Material and labour for reinforced cement concrete 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, seismic and other similar bands complete all as specified and as directed.
Demolition of cement concrete of any description and in any position as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition shall be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be make good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item.
Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Applying bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : Pibial Primer of TEXSA or equivalent product of BITUMAT/ BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 Kg mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (Note :- Cost of cutting groove to parapet wall for inserting APP membrance and filling groove with cement mortar (1:3) shall deemed to be included within the quoted rate.)
Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.
Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed
M & L for concealed point wiring complete with 1.5 sqmm FRLS, PVC insulated multi standard copper conductor single core cable 1100 volts grade, drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall, roof etc, including provn of PVC insulated 1.5 sqmm copper cable for earth continuity conductor and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches, socket outlet etc., for One light point controled by one way switch complete all as specified and directed. (Note :- PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate)
All as per item No 111 above but for one fan point controlled by one way 5 Amp switch
All as per item No 111 above but for one 5 pin socket outlet 05 Amp on independent board .
All as per item No 111 above but for one 5 pin socket outlet 05 Amp on same board .
All as per item No 111 above but for one bell/buzzer point controlled by one push button on independent board.
All as per item No 111 above but for one 15 Amps socket outlet but using 2.5 sqmm copper conductor with 2.5 sqmm PVC insulated single core cable for earth continuity conductor.
M & L for concealed submain wiring with 2 runs of 6 sq mm, single core, PVC insulated, unsheathed cable,1100 volts grade, multi standard copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 6 sq mm copper conductor for earth continuity conductor including taking down old unserviceable submain wiring complete all as specified and directed. (Note :- Two runs of cable, one run of conduit and one run of earth continuity conductor shall be measured as one unit).
Supply & fix switch piano flush button, single pole, one way 5 Amp complete all as specified and directed.
Supply & fix socket outlet, 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed.
Supply & fix switch socket combination 2 in 1, 5 pin, 5 Amp flush type complete all as specified and directed.
Supply & fix switch socket combination, 2 in 1, 5 pin, multipurpose 5/15 Amps flush type universal complete all as specified and directed.
Supply & fixing ceiling fan regulator, electronic, step type 5 speed A/C, 230 volts on the existing laminated sheet complete all as specified and directed.
Supply & fix ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed.
Supply & fixing PVC polycarbonate round blocks 10 cm dia complete all as specified and directed.
S & F Bell push, flush type, 5 amp single pole, complete all as specified and directed.
Supply & fixing call bell, musical type, SP 230 volts and taking down u/s call bell complete all as specified and directed.
Supplying & fixing LED tube light fitting, 1 x 18 watt, with bipin holders, connector block etc. complete with all accessories, internally pre-wired with and including 18 watt tube rod, retrofit and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable and fixing the light fitting to walls / roof complete all as specified & directed.
S&F lamp holder insulated body with back plate angle/straight type complete all as specified and directed.
S&F LED lamp, 10 watt self balast, retrofit type lamp with PBT body shell and DC diffuser CCT 6500 K with fittings complete all as specified and directed.
S&F DB single pole and neutral, wall mounted, 240 Volts, 8 Way with 200 Amps rated bus bar, double door suitable for fixing MCB's including connecting etc and taking down u/s DB, main switch complete all as specified and directed.
S & F MCB SPN 6 Amps to 32 Amps 240 volts complete all as specified and directed.
S & F MCB SP 6 to 32 Amps 240 volts complete all as specified and directed.
S & F LED building security light fitting 35W, new generation energy saving and environmental friendly long life LED light, made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having seperate driver compartment with IP65 protection and impact resistance of IK07 including mounting bracket of suitable size complete all as specified and directed. (Make: Havells Cat No ENDURAPEARLSL25WLED757SASYTOPC or equivalent make of Bajaj/Philips/Crompton)
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fittings complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm and connection complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 1.5 : 3 type A1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exc 1.5 m depth and getting out all as specified and directed.
Returning filling, including spreading levelling, watering and well ramming in layers not exc 25 cms thick of soil all as specified and directed.
Removing the surplus excavated material/soil to a distance not exc 50 mtrs and depositing, where directed at a level not esceeding 1.5 mtrs above the starting point all as specified and directed.
Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified and directed.(Note: Punning depth of sand shall be measured)
Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.
Supply and laying, jointing, testing and commisioning LT XLPE cables, PVC insulated, PVC sheathed, armoured,1100 volt grade, 50 Sqmm 3.5 core heavy duty with aluminium stranded conductor passing through pipes, induct, on poles, or laid in trenches etc including taking up/down old unserviceable cable complete all as specified and directed.
Supply and laying 40 mm bore GI tubing light grade laid in trenches for cable protection complete all as specified and directed.
Supply, install, testing and commissioning of LT distribution board, indoor and compartmental type suitable size enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement including inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 sqmm single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete including suitable size panel mounting MS angle base frame duly painted with synthetic enamel black paint. The cost of the mounting of panel on MS Angle or PCC pedestal(foundation) required as per site is deemed to be included in the quoted rate of the item. The panel shall comprise of the following:- INCOMING :- (i) MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No of Make : L&T/Havells/C&S electric/Legrand/Siemens. (ii) Phase indicating lamp LED type – 1 Set of three. (iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos. OUT GOING :- (i) MCB 40 Amp,415 Volt,10 KA, Single pole and neutral -08 No Make : L&T/Legrand/Siemens/Schnedier/Havells (ii) Single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240V 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire -08 Nos
Excavation in trrenches in hard/dense soil not exceeding 1.5 mtr wide and not exc 1.5 m depth for laying of GI pipes and getting out all as specified and directed.
Cutting existing steel tubing for alterations or additions (Each cut measured) of 40 mm bore complete all as specified and directed.
Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore complete all as specified and directed.
S&F GI water tubing, medium grade, 40 mm dia, incl fittings/accessories like sockets, bend, elbow, union etc, laying in trenches complete all as specified and directed.
M&L for gunmetal globe/gate valve with iron wheel head, screwed both ends of sizes 40 mm complete all as specified and directed.
ELECTRO COMMERCIAL CO
JHAWAR SUPPLIERS
RBS Builders
DNS CONSTRUCTION COMPANY
RADHA ENTERPRISE
PODDAR SALES CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .