REPAIR TO SECURITY FENCING, PATH AND HARD STANDING, RETAINING WALL AND ALLED WKS AT PEDONG, ALGARAH, DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Amount

Dismantling of brick work or stone/boulder/block mansonry all quoins, arches, pillars, etc built in cement mortar complete all as specified and as directed.

Demolition of concrete block walling built in Cement mortar including all quoins, arches, pillers etc complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm in and setting in CM (1:6) complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm except block and setting in CM (1:6) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, (1:2:4) (using 40mm graded crushed stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

M & L PCC Type D2 (1:4:8) (40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L providing cement concreteType C1 (1:3:6) (using 20 mm graded stone aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F 75mm dia PVC (SWR) pipes single socketed fixed in as weep hole complete all as specified and directed.

M & L for flush pointing to concrete block walling in cement mortar (1:4) all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed.

M & L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided.

M&L for RCC (nominal mix) Type B1 (1:2:4) (20mm graded aggregate) as in band of retaining wall complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as spcified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as spcified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Dismantling of Post or Struts (Wood,Steel or RCC) fencing posts or struts any section, including taking out embedded portion and making good disturbed ground, Post emeded in Concrete, brick work, masonry, etc. complete all as per specified and directed.

Dismantling wire mesh fencing complete any type all as per specified and directed..

M & L excavating in post holes (or similar holes) each n exc 0.5 cum , getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 m and making good surfaces in hard/dense soil.

M & L PCC Type C2 (1:3:6) (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F galavanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire.

Supply only chain link MS galvanised fencing any size or type.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and directed.

S & F Hot-Rolled steel unequal angles embedded in concrete and screwing etc, securing bolts, post and struts in fencing including cutting tops to shape as directed, drilled holes , notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or riveting , etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts dia of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L mild steel gd.I. IS-432 (Part I) round Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip).

M & L for two coat of synthetic enamel paint over priming with Red oxide zinc on new or prevously untreated surface of any description not exc 10 cm in width or girth when unconnected with other painting or painted in different tint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new surface of steel and iron surfaces any description over 10 cm width or girth over a coat of red oxide primer including prepration of surface all as per specifed.

M & L for preparing new steel surfaces of any description exc 10cm width or grith and applying two coats of black Japan paint complete all as specified and directed.

M & L precast cement concrete Type B0 (1:2:4) (12.5 mm graded aggregate ) set in cement mortar (1:4) louvres and jallies, 25 mm thick (measured soild), including all moundlings but excluding frame complete all as speciifed and directed.

Demolition of stone slabs or tiles of any description or thickness in floors, aaprons stc laid and bedded in cement mortar complete all as specified.

M & L 75 mm thick type C-2 (1:3:6) cement concrete ( 40 mm stone graded agggregate)in sub base, floors and paving, etc., complete all as specified and directed.

M & L chequred cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigmnet any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade with colour rubber finishes on top over sand dust cushions. [Note - Sand for cusioning will be measured and paid seperatly]

M & L for sand filling ( as cusioning under interlocking paver block) including watering and consolidation complete all as specified .

M&L for cement concrete Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in kerbs for interlocking tiles etc complete all as specified and directed.

MS MAYA PRAKASH GOEL AND SONS

MS BRAHMA CONSTRUCTION

G K SUTHAR

PRASAD PRADHAN AND SON

MANOJ JINDAL

RAJU TAMANG

Sri Gupta Construction