SPL REP TO BLDG NO 214 AND CERTAIN MAJOR REVENUE WORKS AT HQTC BANGALORE

Amount

COMMON ITEMS FOR JOB 'A' ,'B', & 'C' (B/R & E/M)

S&F in 4.8mm thick sheet glass ordinary quantity and glazing with oil putty in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4.0 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

S&F 2nd class HW plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height complete all as specified and as directed.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc, disposal of unserviceable materials, debris and rubbish to a distance as complete all as specified and as directed.

M&L Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6,complete all as specified complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in next cement slurry with white cement & pigments in floors over 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and as directed.

S&F CPVC 16 mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in florr etc., any type of pipe including taking up or down old steel pipe complete all as specified and as directed.

S&F CPVC 20 mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in florr etc., any type of pipe including taking up or down old steel pipe complete all as specified and as directed.

S&F CPVC 25 mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in florr etc., any type of pipe including taking up or down old steel pipe.

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110mm bore of any radius complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), including plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

M&l for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M & L cement concrete type C-2, 1:3:6, using 40mm graded aggregate as in foundations, fillings and mass concrete complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC Casing Caping Pipe ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch

One Ceiling fan/Exhaust fan point/bell point controlled by one single pole 5 Amps switch

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket point 5 Amps on Same board.

All as per item No 30.00 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps switch socket outlet independently complete all as specified and directed.

S&F Modular type fan regulator upto 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed for the following.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals complete all as specified and directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S&F modular swich one way 6 Amps, 230 volts complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular socket, 6 Amps 2/3 pin combined two module, 230 volts complete all as specified and directed.

S&F Modular socket, 6 A/16 Amps 2/3 pin combined two module, 230 volts complete all as specified and directed.

S&F Modular swich one way 16 Amps one module, 230 volts complete all as specified and directed.

S&F Modular white cover suitable with frame 1/2 module complete all as specified and directed.

S&F Modular white cover suitable with frame 3 module complete all as specified and directed.

S&F Modular white cover suitable with frame 6 module complete all as specified and directed.

S&F Modular metal flush board 1/2 module complete all as specified and directed.

S&F Modular metal flush board 3 module complete all as specified and directed.

S&F Modular metal flush board 6 module complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, (2'x2')36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED lights fitting 4 feet, 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down ceiling/Exhaust fan circulators, sealing cable end, dismantaling blades, and removing fan including painting and refix the same including connecting up and provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm in and including PVC casing & caping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two runs of copper conductor together taken as one length for measuring unit length complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed.

S&F MCB SPN upto 40 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'A':-

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 600x300x7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4.complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Virified Ceramic double charged tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item No:55.00 here-in-before but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking plateform, widow sill, step, wall lining and like in cement mortar (1:4) including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade granite incl 15mm thick mortar in cement mortar 1:4 complete all as specified and directed. .

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 100 mm stainless steel butt hinges complete all as specified and as directed.

S&F for 125mm stainless steel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm stainless steel handles complete all as specified and directed.

S&F in repairs 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs powder coated anodised aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F 18/19mm Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F of Internal auto closing concealed hinges, of Kutchina'/Hettich/Hafele makes complete all as specified and directed.

S&F 6" premium quality crome finish Handle,of make "Kutchina"/Hettich/Hafele complete all as specified and directed.

S&F of good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long , of make "Kutchina"/Hettich/Hafele complete all as specified and directed.

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.

S&F in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make- Jaguar Cat No-FON-40081/OPP5037PM or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repairs towel rail, 600 mm long complete all as specified and as directed. Make-Jaguar Code No- AHS-1507 or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repair soap Dish CP complete all as specified and directed. Make-Jaguar Code No- CAN-1137/AKP-35731P or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repair Toilet paper roll holder with flap complete all as specified and directed. Make-Jaguar Code No- AKP-35753P or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repair angle stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, all as specified and as directed . Make-Jaguar Cat no-CON 059KN or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S & F in repairs single lever basin mixture with popup waste system with 450 mm long braided hoses complete all as specified and directed. Make: Jaquar-LYR-38051B/ORP-10011BPM or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S & F in repairs table top basin of size 565X425X140mm of whitecolour complete all as specified and directed Make-Jaquqr Cat No-KUS-WHT 35935/ JDS-WHT-0547 or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repairs 15mm bore hand shower (Health Faucet) with 8 mm Dia, 1 Meter Long flexible tube & wall hook of make: Jaguar Cat No- ALD -573/ALD 577 or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repair glass shelf of 600 mm long with cp bracket.Make-Jaguar Cat no-CAN-1171N or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F Rimless Single Piece-WC with UF slim seat cover, hinges fixing accessories and accessories Set,Cistern fitting,size 380mmx670mmx765mm with hydraulic sheet cover and connecting to 'S' trap 300 mm incl taking down old complete all as specified and directed. Make Jaguar FSS-WHT-29853S300UFSM / OPS-WHT-0205 or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repairs CP connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete all as specified and directed. Make jaguar cat no-ALD-805B or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F stainless steel Gratings size 125 mm dia complete all as specified & directed.

S&F Towel ring square with round flange complete all as specified & directed. Make-Jaguar Code No-ACN-CHR-7721 or Techno-commercially equivalent to SOMA/PRAYAG/CERA/PARRYWARE.

S&F in repairs fancy type CP 2 way bib cock with wall flanges fixed complete all as specified & directed.

S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified & directed.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed.

Sunken Waterproofing: Surface Preparation: Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken/ lowered portion of slab surface for full depth of sunken floor by wire brush or chisel out any mortar sticking the surface all as specified and directed including cleaning and preparation of the substrate to receive Fosroc Polyurea waterproofing system or equivalent product of Asian paints, M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/ Thermax/ STP shall be a sound base free from any oil, grease, rust, or deleterious material which may impair adhesion. The surface preparation shall be carried out mechanically to remove contaminants, laitance & weak concrete, to expose blow holes, and to produce a sound concrete with adequate profile and porosity. Any crack shall be treated with cementitious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar or equivalent product by proper grooving arrangement as advised by Fosroc or equivalent complete all as specified & directed.

Bore Packing (for Reinstallation): Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrenebutadiene based polymer coating using Nitobond SBR or equivalent product of Asian paints, M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/ Thermax/ STP admixed with integral WPC or cementitious crystalline water proofing compound to enhance adhesion between the packing material and other surfaces. Packing the gap using nonshrink cement polymer-based grout using conbextra GP2 upto the surface of the bore whilst the Nitobond SBR is in tacky state. The above analysis is based on assumption for 150/ 110mm diameter core with 110/ 75mm diameter PVC for 5” thick slab only. Typical Properties Compressive strength at 28day as per BS 1881 45N/mm2, completely as per the manufacturer’s Instruction complete all as specified & directed.

Coving treatment: Making coving of 50mm X 50mm at all the flat & vertical junction using Fosroc Renderoc S Single component, shrinkage compensated, fiber reinforced, thixotropic cementitious mortar, to achieves a minimum compressive strength of 20 MPa in 1day and 55 MPa in 28days when tested as per EN 12190 and capable of applying 50mm thickness in single layer of approved product finished flush with existing surface. Make: Asian paint or equivalent product of M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit also provide as per manufacturer technical guidelines

Waterproofing membrane: Supply and application of single-component, Pitch free seamless roller/spray applied Nitoproof 600PF or equivalent product of Asian paints, M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/ Thermax/ STP applied at average minimum DFT of 1.3mm above primed surface with Nitoproof WB Primer or equivalent product of Asian paints, M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/ Thermax/ STP. It shall possess the following properties: Solids by Volume:85%, Tensile Strength ASTM D412: >1.9MPa, Tear resistance ASTM D624C:15(N/mm), Elongation ASTM D-412:>400%, Adhesion in-peel test ASTM C836 (N): >50N Note: Providing a non-woven geotextile fabric of 200GSM over the cured waterproofing membrane before going for a protective layer. Note 1: Fill the sunken with water and check for dampness and seepage. All pipes through the walls of sunken floor shall be laid before water proofing treatment is carried out. One No. 50mm dia 35mm long medium grade GI pipe with wire guage on inside mouth shall be provided to each sunken portion. Cost of pipe with incl of quoted rate, no extra cost will be paid. Note 2: Work shall be carried out complete as per manufacturer's specifications and application methodology. Execution to be done with authorized trained/ skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer, company back gaurantee to be given by contractor after completion of water proofing work before payment.

M&L for drip grooves 20mm wide x 15mm deep provided at 50mm from the end of ceilings, roofs, chajjas, balconies and similar suspended areas etc complete all as specified & directed.

S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece, of 110 mm dia single (single Y) equal or unequal complete all as specified & directed.

Dismantling water tanks, capacity in litres exc 500 & n exc 1000 and removing to store complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S&F ball valves 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified & directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm dia and fixed complete all as specified & directed.

M&L Rendering 5mm thick cement plaster in cement mortar 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of old decorated surface on ceiling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechnical means complete all as specified and directed.

M&L for two coats of Distempering on wall with distemper oil emulsion white or tinted over primer over a coat of 3mm thick wall care putty, including preparation of new surface complete all as specified & directed.

M&L for two coats of Distempering wall with distemper oil emulsion white or tinted through mechnical means. over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of exterior emulsion paint (weather coat) through mechnical means over a coat of approved primer complete all as specified and directed.

M&L Preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L Machine pressed precast concrete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified & directed.

M&L for 50mm thick Cement concrete type B1, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified & directed.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified & directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for floor including finishing the surface even and smooth with using extra cement complete all as specified & directed.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply,laminate and cover) complete all as specified & directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified & directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings including special shaped washer etc complete using ERW or induction butt welded tubes Conforming to IS 1161-1979 grade St -240 complete all as specified & directed.

S&F Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified & directed.

M&L Preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as required complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as required complete all as specified & directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed

S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified and directed

S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod complete all as specified and directed

S&F in repairs MS plain black sheet, 1 mm thick as in covering to doors, frames cut to size edges beaded if erected, hole, punched, including round headed screws clout nails and fixed to steel members with plain 40mm lap joints or welded/riveted complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

All as per Sl Item No 125.00 here-in-before, but without glazing bars complete all as specified and directed

Welding in repairs steel windows / doors n. exc 2.5cm in length, n.exc 6mm thickness of metal to be welded. complete all as specified Note : Rate quoted to be inclusive of replacement of all parts where ever required

M&L Preparing new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 160mm bore, single socketed, in any length with rubber ring joints, fixed to wall for above GF building including necessary scaffolding at any position building including necessary fixing cleats/clamps etc complete all as specified and directed.

Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and directed.

Terrace / RCC roof waterproofing: Surface Preparation: Remove existing water proofing treatment. Picking, sweeping clean and washing down with water to remove dust. While doing the treatment on existing roof, concrete should be thoroughly inspected for any significant distress.Such distress, if any repaired/ rehabilitated and treated complete all as specified and directed.

Bore Packing (for Reinstallation): Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrenebutadiene based polymer coating using Nitobond SBR to enhance adhesion between the packing material and other surfaces. Packing the gap using nonshrink cement polymer-based grout using conbextra GP2 upto the surface of the bore whilst the Nitobond SBR is in tacky state. The above analysis is based on assumption for 150mm diameter core with 110mm diameter PVC for 5” thick slab only. Typical Properties Compressive strength at 28day as per BS 1881 45N/mm2, completely as per the manufacturer’s Instruction. Make: Asian paint TPO or equivalent product of M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/Berger also provide as per manufacturer technical guidelines

Coving treatment: Making coving of 50mm X 50mm at all the flat & vertical junction using Fosroc Renderoc S Single component, shrinkage compensated, fiber reinforced, thixotropic cementitious mortar, to achieves a minimum compressive strength of 20 MPa in 1day and 55 MPa in 28days when tested as per EN 12190 and capable of applying 50mm thickness in single layer of approved product finished flush with existing surface complete all as specified and directed. Make: Asian paint or equivalent product of M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/ Berger also provide as per manufacturer technical guidelines

Waterproofing membrane: Providing and laying / fixing TPO membrane of non-flammable waterproofing of Roof which shall be a 1.5mm thick loose laid membrane using Fosroc Proofex ORG (I) membrane or equivalent layers are overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll’s either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of nonwoven geotextile fiber or Asian paint TPO or equivalent product of M/s MC Bauchemic/ CIPY/ SIKA/ Pidilite/ Dr Fixit/M/s Berger TPO membrane. The separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG (I) membrane and the concrete substructure. The termination of Fosroc Proofex ORG (I) by aluminum strip anchoring. Note: Work shall be carried out complete as per manufacturer's specifications and application methodology. Execution to be done with authorized trained/ skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer, company back gaurantee to be given by contractor after completion of water proofing work before payment)

M&L for digging out roots of bushes, small trees, grass of any dia & girth from accessible roof projection, chajjas, wall junction, parapet etc at any height and applying herbicide 2,4-Dichlorophenoxyacetic acid including necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded stone aggregate) and necessary rendering of cement mortar 1:4 and after applying damp proof epoxy based primer and paint the surface matched with existing surfaces complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt,and wiping,drying etc, from tanks and from mouths of circulating pipes,rotational moulded polyethylene water storage tanks, capacity in n. exc.1000 liter (cylindrical vertical with closed top) hoisted complete all as specified and directed

ITEMS APPLICABLE FOR JOB 'B':-

S&F Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions and directed.

S&F 5.5 mm thick ceiling board with powder coated GI suspended ceiling with 9mm wide T section. The frame work comprises of main runner at 1200mm c/c. The last hanger at end of each main runner should not be greater than 450mm from wall. T Chanel 1200mm long cross was to be inter locked between main work at 600mm long cross to centrally between the 1200mm cross tees main T Chanel suspended with 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by mean of ceiling cleats made out of GI flash 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long with following specifications complete all as specified and directed: 1. Ceiling board dimension 595 x 595 mm 2. Weight - 5.94 kg/m2 3. Density- 1200 kg/m3 4. Acoustics- 34 DB 5. Moisture resistance- Yes 6. Fire resistance- Yes 7. Thermal Insulation- Yes

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. Note : sheet Glass and SS wiremesh shall be measured & paid separately.

S&F 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers only one face has decorative veneer fixed with nails over 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

S&F in second class harwood teak finish beading/ hand rail decorative antique finish in section n.exc 13 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC conduit Pipe/casing and capping ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

Two light point controlled by one single pole 5 Amps switch.

One Ceiling/wall fan point controlled by one single pole 5 Amps switch.

M&L Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC casing and capping ISI marked 40mm dia with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One 3 pin socket point 5 Amps on independent board.

Taking down Existing SPN MCB DB enclosure & refixing Single pole and neutral enclosure with a two pin and earth plug and socket 20 Amps 240 V complete with one double pole MCB for AC complete all as specified and directed.

Taking down completely existing fire alaram system and refixing the same after completion of wiring work complete all as specified and directed.

Taking down carefully Spilit type Air conditioner from wall/ceiling etc and refixing same with any minor fixitures like copper tube,brackets, condenser and addl gas charging etc complete all as specified and directed. Note: In case of any damage of accesories during refixing, it shall be the responsibilty of contractor to make the AC functional before handing over.

Taking down Existing SPN MCB DB upto 63 Amp enclosure & refixing the complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'C':-

S&F 100 mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed. Note : sheet Glass and SS wiremesh shall be measured & paid separately.

S&F 100 mm long Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in cement mortar 1: 6 , ccomplete all as specified and directed.

M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement all as specified and directed.

M&L for preparing new plastered surfaces of walls and two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness plaster of paris putty to prepair the surface even and smooth complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete ctype C-2, 1:3:6 (40mm graded stone aggregate) as in flooring , foot path, hard standing, plinth protection, bases of water tanks etc, including finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) 'P' or 'S' trap 110mm bore complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs 15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm chromium plated pillar cock swan neck premium quality complete all as specified and directed.

S&F angular Stop Cock/ push cock premium quality with Wall Flange complete all as specified and as directed.

S&F CP Health Faucet premium quality with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook complete all as specified and directed.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs standard PVC waste pipe 32mm dia.,complete for WHB complete all as specified and directed.

S&F in repairs Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs 5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel alround complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F vitreous china smart flat back urinal premium quality of size 390x400x590mm, white including brackets, and waste coupling & pipe of 32mm dia, and fixed with & including all connected items complete all as specified and directed.

M&L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads ,partition including cutting and polishing of tiles and 20 mm thick screed bed of cement morter 1:6 complete all as specified and directed.

M&L cement concrete type C-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in hard/dense soil complete all as specified and directed.

M&L cement concrete type C-2, 1:3:6, using 40mm graded aggregate as in foundations, fillings and mass concrete complete all as specified and directed.

M&L 150mm bore Double wall corrugated HDPE pipe (DWC HDPE) of stiffness class designation SN 8 (conforming to I.S. 16098 Part-2 : 2013) (Spigot and Socket ended pipe) at site conforming to relevant I.S. and CPHEEO Specification jointing with rubber gasket, alongwith all necessary fittings for jointing the pipe complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soilcomplete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe, complete all as specified and directed.

Removing building materials etc.to a distance of 20.0 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

S&F modular white cover suitable with frame 4 module complete all as specified and directed.

S&F modular metal flush board 4 module complete all as specified and directed.

S&F DB, SPN 8 ways, Double door type complete all as specified and directed.

S&F Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.50 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.50 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

M&L for sub main wiring complte with 2 runs of 4.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 2.50 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

S&F Exhaust fan, steel body AC Single of size 300 mm sweep with blades and frames, louvers complete voltage 230 volts, 50 HZ complete all as specified and as directed.

Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

raashi constructions (BID ID -3124146)

M R CONSTRUCTIONS (BID ID -3125674)

chowdeshwariconstructionco (BID ID -3113158)

PRAGATHI BUILDERS (BID ID -3124525)