Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54,000Accepted-Finance | L1 | Accepted-Finance Being Lowest for item no1.01 | |
| 2 | L1₹1.7 LAccepted-Finance BYPASS NH NEAR SBI SIDHRA JAMMU | L1 | Accepted-Finance Being Lowest for item no2.01,3.01 | |
| 3 | L2₹1.5 LRejected-Finance MAIN ROAD SIDHRA JAMMU | L2 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
Closing Date
27 Sept 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer MID Jammu
Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.2 of LIS Rattanpur Paras along with allied works, Replacement of worn out parts of 5 cusec pumping unit no.5 along with allied works at LIS Batera and Repair/replacement of
2022_IFC_188013_1
MID/J/e-NIT/2022-23/45
Open Tender
Repair and Maintenance Works
Item Wise
10 days
Rattanpur paras Batera Manyal Brahmana
As per tender notice
7 documents required · 7 mandatory
₹200
Executive Engineer MID Jammu
Exempted
7 Oct 2022
12 Sept 2022
28 Sept 2022
12 Sept 2022
27 Sept 2022
21 Sept 2022
12 Sept 2022 - 27 Sept 2022
Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.2 of LIS Rattanpur Paras along with allied works
Decoupling of 5 cusec x 10m head HC pump of unit no.2 at LIS Rattanpur Paras from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec HC pump set at workshop by way of dismantling and extraction of damaged internal parts. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Repairs to existing pump shaft by means of remetaling, turning and finishing to accurate size and its proper adjustment. Providing and fitting of new bush, new wear ring, new bearings as per sample, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, complete reassembling of pump set after carrying out necessary repairs. Shifting back to the LIS Suhagani after carrying out necessary repairs at workshop and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load.. Repairs to Coupling set by way of welding, machining of bore, resizing of coupling bolt holes by welding and drilling to proper size.Job also includes providing and fitting of new coupling nuts/bolts & rubber bushes. Complete job including cost of material and labour charges. Dismantling/decoupling of the damaged 40 H.P electric motor of Pumping unit no-2 from base frame, pump & motor starter electrical connections. Repairs to rotor of motor by providing/fitting of new bearings (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing sizes, making new keyway for coupling, providing/fitting of bearing end cover plates. Complete greasing of the bearing, providing/fitting of side strainers. Complete job includes cost of material and labour charges.
Rebate on Old Parts
Replacement of worn out parts of 5 cusec pumping unit no.5 along with allied works at LIS Batera
Decoupling of 5 cusec x 24m head HC pump of unit no.5 at LIS Batera from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec HC pump set at workshop by way of dismantling and extraction of damaged internal parts. Job includes providing/fitting of new shaft sleeve and new pump shaft by turning, aligning, threading at ends and making of new keyways and its proper adjustment. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Providing and fitting of bush, new gland ring, gland set, gland studs, rubber gasket, new bearings as per sample, repair of bearing housing, new studs/bolts on it, applying sufficient amount of grease and M oil to avoid excessive wear and tear, gland packing as per requirement, complete reassembling of pump set after carrying out necessary repairs. Shifting back to the LIS Batera and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Providing and fitting of new coupling set along with new nuts, bolts and rubber bushes. Complete job includes cost of material and labour charges. Repair to the rusted/damaged suction pipe 250mm dia. of pumping unit no.5 of LIS Batera. The Job involves dismantling of the already fitted M.S pipe of 250mm dia. from the concrete wall by cutting of the damaged portion of the M.S pipe approx. 3.5ft with the help of gas cutter and providing/fitting of the 250mm dia. M.S pipe piece of the same size by fabrication with the help of electric welding as per site requirement. Repairs to 70HP Manually Operated Oil immersed star-delta motor starter of Unit-5 of LIS Batera. Job includes dismantling of starter from its installed position after disconnecting all electrical connections on input as well as output side and then carriage of the starter to workshop for repairs/replacement of intermediate Bakelite rod, moving and fixed copper contact points, no volt coil, thimbles, overload protection relay and then back carriage to LIS for re-installation, commissioning and testing on no load and full load conditions. Job also includes providing and filling of approx.10 litres of fresh transformer oil in the tank after complete de-moisturizing. Complete job includes cost of material, skilled labour charges, tools and tackles charges and carriage charges.
Rebate on Old Parts
Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.2 along with allied works at LIS Manyal Brahmna
Decoupling of 5cusec x 10m head horizontal casing pump of unit no.2 from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 5cusec pump set by using manual labour, head load to the nearest roadside, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec horizontal casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repairs to the pump shaft by way of turning, rethreading & finishing to accurate size as per specifications of damaged pump shaft. Providing & fitting of new impeller in place of damaged one as per sample and fitting of the same on the pump shaft. Providing and fitting of 2no.s new bearings on driving and non driving end of the pump as per sample, 2no.s neck rings, 2no.s shaft protection sleeves, 2no.s new check nut, bushes, new gland set & studs, rubber gasket and also applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement. Repair to the bearing housing on driving and non-driving ends of pumping unit by turning and fitting of bush to make inner dia. of bearing housing suitable for fitment of bearings. Complete assembling of pump set after carrying out necessary repairs. Shifting back to the LIS Manyal Brahmna after carrying out necessary repairs at workshop and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Job also includes providing and fitting of new coupling nuts/bolts & rubber bushes. Complete job includes cost of material and labour charges. Repairs to 40HP Manually Operated Oil immersed star-delta motor starter of Unit-2 of LIS Manyal Brahmna. Job includes dismantling of starter from its installed position after disconnecting all electrical connections on input as well as output side and then carriage of the starter to workshop for repairs/replacement of intermediate Bakelite rod, moving and fixed copper contact points, no volt coil, thimbles, overload protection relay and then back carriage to LIS for re-installation, commissioning and testing on no load and full load conditions. Job also includes providing and filling of approx.5 litres of fresh transformer oil in the tank after complete de-moisturizing. Complete job includes cost of material, skilled labour charges, tools and tackles charges and carriage charges
Rebate on Old Parts
M/S TRIKUTA ELECTRICAL AND MECHNICAL WORKS
JAI MAA BHAGWATI ELECTRICAL AND MECHANICAL WORKS
M/S TRIKUTA ELECTRICAL AND MECHNICAL WORKS
JAI MAA BHAGWATI ELECTRICAL AND MECHANICAL WORKS
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .