Construction of Girls hostel at Reasi campus

Amount

Earth work in foundation, trenches, bulk excavation, including stacking soil neatly away from the edges, filling back by the sides of foundations, in plinth in 150mm thick layers, ramming, watering and consolidation complete. Including disposal of Surplus Earth within University Campus as directed by the Engineer In charge. Nothing extra on account of lead or lift shall be paid by the department. In All Kinds of Soil/ Ordinary Rock/ Hard Rock (Blasting Prohibited)

Providing and laying Cement concrete 1:5:10 (1cement: 5 coarse sand: 10 graded crushed stone aggregate 40mm nominal size) in foundation and under flooring including machine mixing, consolidation, curing and Centering, shuttering/form work complete.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement 1.5 coarse sand 3 graded crushed stone aggregate 20 nominal size including cost of centering, shuttering complete. All work upto plinth level.

P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 12.5/20 mm nominal size) including the cost of centering shuttering upto Floor V Level but excluding cost of reinforcement in:- Columns, walls including attached pilasters buttresses etc. Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, vertical and horizontal fins individually or forming box louvers band, facias and eaves boards lintels, bands plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All work above plinth level upto floor V level. Nothing extra shall be paid for additional height of form work.

Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5mm nominal size) including cost of machine mixing, curing, centering shuttering / form work complete.

Filling in plinth and under floors with river bed material brought from outside including watering, ramming, dressing and consolidation in layers not more than 200mm thickness complete in all respects.

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending binding and placing in position complete including cost of steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete. All work upto floor V level. (Make Tata Tiscon /Rashtriya Ispat/ SAIL)

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure including cost of scaffolding, curing etc complete. All work upto floor V level. In cement mortar 1:6 ( 1 cement: 6 fine sand)

--------do-------- In cement Mortar 1:4 (1 cement: 4 fine sand)

Half brick masonry with brick of class designation 75 in foundation, Plinth & Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level.

Extra for providing and placing in position 2 Nos. 8mm dia MS bars at every fourth course of half brick masonry (with FPS bricks)

Brick and Brick tile Jaali with 22.86 cm x 11.43 cm thick alternate layers laid in cement sand mortar 1:4 using 30 No. bricks and 30 No. brick tiles 22.86 cm x 11.43 cm x 3.81 cm. All work upto floor V level.

Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of course sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of penetration 80/100.

Making plinth protection with 50mm thick cement concrete 1:3:6 (1 cement : 3 sand :6 crushed stone aggregate 20 mm nominal size) laid over 75 min bed of dry brick aggregate 40 mm nominal size, rammed ,consolidated and grouted with fine sand including making groves as required ,necessary form work, curing etc complete.

100 mm thick (average mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth gobri leaping with mix 1:1 (1 clay 1 cow dung) and covered with flat FPS brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement 3 sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.

Flush Pointing on brick tiles laid on terrace with cement mortar 1:3 (1 cement : 3 fine sand)

Providing angular fillets 75mm x 75 mm cement concrete 1:2:4 (1 cement : 2 course sand : 4 crushed stone aggregate 20 mm nominal size)

Making khurras 60x60cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and laying of water proofing treatment to vertical and horizontal surface of depressed portions of W.C. Kitchen and like consisting of:- First Course: Applying Cement Slurry @4.4kg/Sqm mixed with water proofing compound confirming to IS:2645 in recommended proportions including rounding of junctions of vertical and horizontal surface. Second Course: 20mm Cement Plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. Third Course: Applying blown or/residual bitumen applied hot at 1.7kg. per sqm of area. Fourth Course: 400 micron thick PVC Sheet. (Overlaps at joints of PVC Sheet should be 100mm wide and pasted to each other with bitumen @ 1.7kg/Sqm. Note:- Flat area of sunken slabs shall only be measured and paid for. Nothing shall be paid extra for the treatment laid over the vertical sides of sunken portion

10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on brick walls for interior plastering including making the grooves in plaster between brick masonry and RCC Work (Horizontal / Vertical) and cost of form work /scaffolding as required complete. All work upto floor V level.

10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on brick walls for exterior plastering including making the grooves in plaster between brick masonry and RCC Work (Horizontal / Vertical) and cost of form work /scaffolding as required complete. All work upto floor V level.

6mm-10mm cement plaster 1:3 (1 cement :3 fine Sand) to ceiling and other RCC exposed surface where required as per the instructions of the Engineer-in-charge including cost of centering, shuttering, scaffolding etc. as required complete. All work upto floor V level.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture on wall surface to give an even finish (Make JK/Birla)

Distempering (two or more coats) with oil bound washable distemper of approved brand (Asian/Nerolac) and manufacture and of required shade on undecorated wall/ ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture. All work upto floor V level.

Finishing wall with premium acrylic smooth exterior paint (Apex/Excel) with silicone additives of required shade on new work (two or more coats) applied @ 1.43 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm) (All exterior sides of building)

Providing and applying at all floors, heights, levels and locations interior texture coating of granule finish made from silica sand, in organic pigments and pure acrylic polymer emulsion. And bonding agent of made from pure acrylic co-polymer emulsion, broad-spectrum fungicide. Heritage granule and bonding agent mixed to a recommended quantity of water and applied with a trowels on to the surface, to be finished, in an average uniform coat of 0.8 to 1mm covering an area of about 5 sft. /kg of the mix. giving a uniform surface texture applied by a trained granules applicators in a single coat. The base has to be smooth sand faced cement plaster after duly clearing off any unwanted scratches and undulations by sand papering or using a wire brush before actual application begin complete as per drawings, requirements, specifications & as directed by the Architect / Employer. The tendered rate to account for all types of material, labour, machinery, T&P, curing, with all leads, lifts and sampling, testing and water arrangements complete.

Supplying and filling in plinth with fine sand under floors including watering, ramming consolidating and dressing complete.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 grade crushed brick aggregate 40mm nominal sizes) under flooring including machine mixing, finishing, consolidation, curing and form work etc. complete.

Providing and laying Raj Nagar Plain Marble Stone (75 mm wide strip) Flooring with 16mm (average) thick marble stone over 20 mm average thick base of cement mortar 1:4 (mix) (1 cement: 4 coarse sand) laid and jointed with cement slurry joints finished with white cement mixed with pigment of matching shade including rubbing, granite polishing to give high gloss finish complete. Nothing extra shall be paid on account of wastage. All work upto floor V level.

Providing and fixing ISI quality coloured (as approved) ceramic glazed tiles on wall conforming to IS: 13753 of minimum thickness 5mm of approved make NITCO/Kajaria/Johnson and colour shades as required in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg/ Sqmt including finishing the joints with Synthetic Grout mixed with pigment to match the shade of the tile complete size 300x450 mm / 300x600 mm. All work upto floor V level.

Providing and laying in floors/skirting Ist quality ceramic glazed tiles (Antiskid) of approved make (Johnson/ Kajaria/Nitco) floor tiles of different sizes 300x300mm/400x400mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with synthetic grout mixed with matching pigments, curing etc. complete. All work upto floor V level.

Providing and laying vitrified floor tiles of size 60x60 cm (Double charged),8-10mm thick with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Kajaria / Johnson/ Nitco) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with pigment of matching shade complete. All work upto floor V level.

Chequerred precast cement concrete tiles 22 mm thick (NTC Make) in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade using 50% white cement 50% ordinary cement.

Providing and fixing 18 mm thick gang saw cut mirror polished (pre moulded and pre polished) machine cut for kitchen platform, vanity counters window sills facias and similar location of required size of approved shade. colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement 4 coarse sand) with joints treated with white cement mixed with matching pigment epoxy touch ups, including edge moulding rubbing, curing, and Granite polishing to give high gloss finish etc. Jet Black Granite (area of slab over 0.5 sqm) complete. All work upto floor V level.

Providing and laying Udaipur Green Marble stone Flooring / skirting with 16mm (average) thick marble stone over 20mm average thick base of cement mortar 1:4 (mix) (1 cement : 4 coarse sand) laid and jointed with cement slurry joints finished with synthetic grout mixed with pigment of matching shade including rubbing, edge moulding, granite polishing to give high gloss finish complete upto all floors levels & height as per drawings. Nothing extra shall be paid on account of wastage. All work upto floor V level.

Providing and fixing of water proof ply of approved quality (Green /Orchid /Century) including cost of labour nut bolts for fixing of frames fevicol, nails etc, filling the surface with chalk putty mixed with paint, sand papering to prepare the surface even and smooth applying priming coat of wood primer and then (two or more coats) with synthetic enamel paint of approved brand and manufacture (Asian/Nerolac). Nothing extra shall be paid for any wastage (for manufacture of cupboard) complete upto all floor levels and height as per drawings and strictly as per direction by the Architect / Engineer in Charge. 6mm Thick ply

----------do----------- 19 mm thick ply

Providing and fixing of 1.0mm thick Sunmica of approved quality & make (Formica, Green, Bloom) including cost of labour fevicol nails etc as required nothing extra shall be paid for any wastage. All work upto floor V level.

Providing wood work in frames of doors, windows and clerestory windows and other frames, wrought framed and fixed in position (Second Class Teak Wood) including two or more coats of French Spirit polishing of approved brand and manufacture including filling with wood filler complete.

Providing wood work in frames of doors, windows and clerestory windows and other similar work fixed in position. Salwood inlcuding applying a priming coat of wood primer and then two or more coats of synthetic enamal paint of approved brand and manufacture. (Asian/Nerolac)

Providing 40mm x 5mm flat iron hold fast 30cm long including fixing to frame with 10mm diameter bolt, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) a) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)

-----------do--------------- b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws, joints metred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge. Extruded section profile size 48x40mm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5.50 mm thickness (wt not less than 13.75 kg / Sqm)

30 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanized /plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 25 x 20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size100 x 30 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanized M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S Rod and fastened with nuts and washers complete as per manufacturer's specifications and directions of the Engineer-in-charge. (For WC Bathroom, door shutters).

Providing and fixing in position 35mm thick factory manufactured pre-laminated flush door shutters of decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply duly pre-laminated with 1mm thick laminates of approved quality colour, texture and brands on both faces of shutters complete including cost of ISI marked stainless steel butt hinges with necessary screws etc complete duly fixed in position as per drawings, requirements, specifications and as per directions of Engineer in charge including applying priming coat of wood primer and then (Two or more coats) with synthetic enamel paint / Polish of approved brand and manufacture as required. All complete as per Architectural drawings and the directions of Engineer-in-charge.

Providing and fixing 35mm thick IInd class Deodar wood glazed shutter for window/ clerestory windows as per required drawing design and specification with necessary Stainless Steel butt hinges with screws including providing and fixing of 4 mm thick glass panes of approved quality with necessary beading and sash bar (Deodar wood 2nd class) etc including applying priming coat of wood primer and then two or more coats with synthetic enamel paint of approved brand and manufacture complete upto all floor levels and heights in all respects as per direction of Architect and Engineer in charge.

Providing and fixing 35mm thick (IInd Class Deodar Wood) wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4mm with wire of dia 0.63mm for doors, windows and clerestory windows including applying a priming coat of wood primer and then two or more coats of synthetic enamel paint of approved brand and manufacture. Including ISI marked Stainless Steel butt hinges with necessary screws complete upto all floor levels and heights in all respects as per direction of Architect and Engineer in charge

Providing and fixing paneling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows clerstory windows, 4mm thick float glass panes for fixed portion

Providing and fixing in position M.S. door made out of M.S. Angle chowkhats 40x40x6mm, shutter frame of M.S. Angle 35x35x5mm with M.S. flat horizontal & diagonal braces of sections 35x5mm, M.S. sheet cover 16 gauge M.S. hinges and all other fittings accessories like M.S. tower bolts, handles and sliding bolts etc required for the completion of the items including applying a coat of metal primer and then two or more coats with synthetic enamel paint of approved brand and manufacture complete as per requirements, drawings and as directed by Engineer in charge.

Providing and fixing double action hydraulic floor spring with stainless steel plate of approved brand and manufacture IS: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with Stainless Steel pivot and single piece cast iron outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing IS: 3564 marked aluminum extruded section body tubular type universal hydraulic door closer, with double speed adjustment with necessary accessories and screws etc. complete. Hardwyn make (Gazel) or equivalent.

Providing and fixing bright finished Stainless Steel 100 mm mortice latch and lock ISI marked with six levers and a pair of anodized (anodic coated not less than grade AC 10 as per IS : 1868) aluminum lever handles with necessary screws etc. complete, best make of approved quality.

Providing and fixing aluminum ISI marked of door/window fittings powder coated aluminium to required colour or shade with necessary screws etc. complete. Hanging floor door stopper (twin rubber)

------do--- Tower bolts 250x10mm

------do--- Tower bolts 200x10mm

------do--- Tower bolts 150x10mm

------do--- 100mm Handles

------do--- 125mm Handles

-----do--- Steel Eye hook 150 mm

Providing and fixing stainless steel (Grade 304 of matt hairline finish) 50mm dia stair case railing 3'-0" height Above Riser Clear as per design and drawings including cutting wall and making good the same with PCC of mix 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate 20mm down graded) drilling holes in step / floor and filling with pig lead in holes after providing and fixing 25mm dia steel balusters on steps and 50mm dia (minimum) end balusters with necessary steel caps of approved shape and size including fixing of 12mm sq/dia bar running along baluster as per architectural drawing supplied including complete fixing and installation, polishing of all joints complete upto all floor levels and height as per drawings and directions of the Architect / Engineer in Charge.

Providing and fixing aluminum grill Powder coated aluminum (minimum thickness of powder coated 50 microns) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminum standard section around the opening, all complete as per requirement and direction of Engineer incharge.

Providing and laying / fixing expansion joint in position at floor level comprising of 35mm thick thermocol sheet of 16 gauge density over metal cradle, poly sulphide based expansion joint sealant 1½" thick and 35mm wide over thermocol sheet including stone /slab and poly-sulphate based expansion joints as sealant complete in all respects including cost of all material and labour required. Complete upto all floor levels and height in all respects as per drawings and directions of the Architect / Engineer in charge.

Providing and laying VERTICAL EXPANSION JOINT in position in RCC columns having 2" thick thermocol sheet and 12" width with and POLYSULPHIDE BASED expansion joints as sealant 1.1/2" thickness 2" width on top of thermocol sheet and 9" wide GI sheet fixed with 75mm long Gunmetal Anchor Bolts from both ends @ 12" c/c over RCC columns including cost of all material and labour required complete upto all floor level & height in all respects as per drawings and direction of the Architect / Engineer in charge.

Providing and laying in position expansion joints at roof comprising of 2" thick thermocol sheet 16 kg density over metal cradle and poly sulphide based expansion joint sealant 1½" thick and 2" width over thermocol sheet including rick cement mortar and again thermocol sheet of same thickness width and density and finally covered with again silicon based expansion joints of ½" thickness etc. including cost of all material and labour required complete in all respects as per drawings and requirements

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer up to height of floor V level In grating, frames, guard bars, ladders, railing, brackets, gates, roof trusses & similar works including applying a priming coat and then two or more coats with synthetic enamel paint of approved brand and manufacture (Asian/Nerolac)

Honey comb brick work 10/11.4cm thick with second class burnt clay bricks in cement mortar 1:4 (1cement 4 coarse sand ) complete.

Providing and filling (hand packed) brick bat in soakage pit around the honey comb brick masonry including leveling and compacting etc complete.

SANITARY WORKS Providing and fixing vitreous china pedestal type (European type/ wash down type) water closet pan (Parryware / Hindware / Cera) including providing and fixing solid plastic seat with lid (white colour) and providing and fixing low level PVC flushing cistern with all manually controlled device (handle lever) confirm to Is; 7231 (Parryware /Hindware/Cera) 10 liter capacity – white in colour fitted with unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60 cm length, G.I. inlet connection for flush pipe connecting WC pan, C.P. brass angle valves (02 Nos) 15 mm nominal bore (Prayag make) CP jet (heavy duty) with PVC connection pipe to be fixed with European type WC complete job. Nothing extra shall be paid.

Providing and fixing water closet squatting pan (indian type W.C. pan) with 100 mm sand cast Iron P or s trap, 10 litre low level PVC flushing cistern (of approved make Parryware /Hindware/ Cera) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I./M.S. brackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests including cost of cement concrete 1:2:4 platform of required size.

Providing and fixing (parryware /Hindware or Cera) make vitreous chinaware wash hand basin consisting of PTMT waste Coupling 32 mm dia , PTMT push type pillar tap, PTMT angle valve (Paryag make) PVC waste pipe Unplasticised PVC connection pipe 15 mm nominal bore, brass end union 45 to 60 cm length complete job including making good the wall and floor in all respects. Size 630x450 mm

Providing and fixing (Parryware /Hindware or Cera) make white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and making good the wall and floor complete in all respects..

Providing and fixing Salem Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel waste coupling and plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. Including providing and fixing of 40mm dia PVC waste pipe (Flexible) and Unplasticised PVC connection pipe with brass end union 45cm length and 15 mm nominal bore as required a) Kitchen Sink with drain board 510x1040 mm bowl depth 225 mm

--------do--------- Kitchen sink without drain board 610 x 510 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

------do--------- 40 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass of approved quality (Make SAINT GOBIN) and of required shape and size with frame of ornamental teak wood moulding with 6cm thick hardboard backing fixed on wall with necessary brackets and screws etc. complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing C.P Brass toilet paper holder.

Providing and laying PVC rain water pipes 4 kg/cm2 pressure excluding PVC fittings, jointing with adhesive/seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (Uniplas/Supreme/Finolex/Astral make) 110 mm dia

--------do-------- 80 mm dia

Providing and fixing in position PVC specials as per IS: 14735 including cutting, jointing and wastage double socket 'B' & fitting with rubber gasket joint at all heights, levels, including cutting jointing, wastage, cutting chases and hole and other required material as per directions of Architect / Engineer-in-charge. PVC BEND 110 mm dia

--------do--------- 80 mm dia

PVC SINGLE JUNCTION WITH DOOR 110mm x 110 mm x 110 mm

----do---- 80 mm x 80mm x 80mm

PVC COLLOR 110 mm dia

----------do---------- 80 mm dia

PVC COWLS 110 mm dia

----------do------- 80 mm dia

Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. (Make Supreme/Finolex/Prince) 100 mm inlet and 75 mm outlet

---do---- 100 mm inlet and 100 mm outlet

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with brackets of the same materials with snap fitting of approved quality and colour, weighing not less than 105 gms (Prayag Make)

Providing and fixing PTMT soap dish of standard size and quality (Prayag Make)

Providing and fixing PTMT towel Ring trapezoidal 215 mm long, 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms (Prayag Make)

Providing and fixing PTMT Towel rail complete with end brackets fixed on wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. (Prayag Make)

providing and fixing M.S. holder bat clamp of approved design to PVC pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Each. 6mm dia expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe. Total brackets length upto 580mm of approved shape and design (for single 80mm/110mm dia pipe)

Earth work in excavation by manual/mechanical means in trenches for foundations, drains, pipes, cables, soakage pit, septic tank etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth with in University campus as directed by engineer incharge disposed earth is to be levelled and neatly dressed. In All Kinds of Soil/ Ordinary Rock/ Hard Rock (Blasting Prohibited)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting chases and making good the walls (medium grade) concealed / Exposed on wall (Make Jindal/Prakash Surya/Tata) 15 mm dia nominal bore

---------do-------- 20mm dia nominal bore

--------do--------- 25 mm dia nominal bore

--------do--------- 32 mm dia nominal bore

-------do---------- 40 mm dia nominal bore

-------do---------- 50 mm dia nominal bore

-------do---------- 65 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings of medium grade including trenching and refilling etc. (external work). (Make Prakash Surya /Jindal/Tata) 25mm dia nominal bore

-------do-------- 32 mm dia nominal bore

-------do-------- 50 mm dia nominal bore

-------do-------- 65 mm dia nominal bore

-------do-------- 100 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 25mm nominal bore

Providing and fixing gun metal non return valvue of approved quality (screwed end). 25 mm nominal bore Vertical

------do--------- 32 mm nominal bore Vertical

------do---------40 mm nominal bore horizontal

------do--------- 50 mm nominal bore Horizontal

Providing and fixing unplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

---do----- 45 cm length 15 mm nominal bore

Providing & fixing PTMT swiveling shower rose 15 mm of Prayag make weighing not less than 40 gms complete job.

Constructing masonry Chamber 30x30x50 cm, inside with 2nd class common brunt clay bricks in cement mortar 1:5 for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.

Painting G.I. pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 15 mm diameter pipe

------do-------- 20 mm diameter pipe

-------do------- 25 mm diameter pipe

-------do------- 32 mm diameter pipe

-------do------- 40 mm diameter pipe

--------do------ 50 mm diameter pipe

--------do------ 65 mm diameter pipe

Providing and filling sand of coarser grade all-round the G.I. pipes in external work. 25 mm dia pipe

---------do--------- 50 mm dia pipe

---------do--------- 65 mm dia pipe

---------do--------- 100 mm dia pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15 mm nominal bore

------do--------- 20 mm nominal bore

------do---------- 25 mm nominal bore

------do---------- 32 mm nominal bore

------do---------- 40 mm nominal bore

------do---------- 50 mm nominal bore

------do---------- 65 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License Each with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex/Star, Lotus having valid ISI license).

Providing and fixing PTMT bib cock half / full turn fitting 15mm nominal bore 122 mm long weighing not less than 99 gms Prayag make complete in all respects (Prayag Make)

Providing and fixing PTMT long body bib cock with wall hang half / full turn fitting 15mm nominal bore 165mm long weighing not less than 110 gms Prayag make complete in all respects.

Providing and fixing PTMT stop cock (concealed) of 15mm nominal bore 108 mm long weighing not less than 108 gms. Prayag make complete in all respect.

Providing and fixing PTMT angle stop cock 15mm nominal bore weighing not less than 85 gms. Prayag make complete in all respects.

Providing and laying in position cement concrete 1:3:6 (1Cement: 3 Coarse Sand: 6 Graded Stone aggregate 20mm nominal size) including the cost of centering and shuttering - All work upto floor V level.

Providing, laying PVC pipes including joining with adhesive including testing of joints etc. complete. (Make Finolex /Prince/Supreme) 4kg pressure/cm square 100 mm diameter

---------do----------- 150 mm diameter

--------do----------- 200 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded crushed stone aggregate 40 mm nominal size) around PVCpipes including bed concrete as per standard design (150 mm thick all around) for 100mm/150mm/200mm diameter pipe in ground (External work).

Providing and fixing square - mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight CI cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type with F.P.S. bricks class designation 75

Constructing brick masonry chamber for underground CI inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 (1 cement : 5 fine Sand) including fixing angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required. RCC top slab with 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 40mm nominal size), foundation concrete 1:5:10 (1 cement : 5 Coarse Sand : 10 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.Inside dimensions 600 x 850 mm and depth from 45 cm to 1.0 mtr. for single pipe line with three or more inlets. With F.P.S. bricks

Providing and fixing G.I. Tank nipple size 1" to 2" for connection complete in all respects.

Cutting holes upto 30 x 30 cm in walls including making good the same with FPS Bricks in cement mortar 1:4 (1 cement : 4 sand)

Cutting holes upto 15 x 15 cm in RCC floors and roofs for passing the pipes etc. and repariring the hole after insertion of pipes etc. with cement concrete 1:2: 4 (1 cement : 2 coarse : 4 graded stone aggregate 20 mm nominal size) including formwork, finishing complete so as to make it leakproof. All work upto floor V level.

Providing and Fixing of check Valve for motor 32mm nominal bore of approved quality complete in all respects.

Providing, installing and commissioning mono block water motor 1 HP make Crompton /servo complete in all respects.

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticed rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap fro thermal expansion. 110 mm dia bend

------do------- 100 mm shoe bend

Providing and fixing in position precast RCC manhole cover and frame of rectangular shape 600 x 450 mm internal dimensions as per standard design complete in all respects.

Providing M.S foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) as per standard design. With 20 x 20mm square bar.

Providing, Supply & installation of : i) PFC collector IS – 12933 PART I & II of solar water heating systems capacity 500-1000 LPD complete with stainless steel hot water tank with heat exchanger, support structure to collectors, hot water, cold water PVC sintex tank, temperature gauge. Electrical elements 3x3 KW with thermostat ii) Cold water pipe line GI B - class with fittings 25 mm compete iii) Hot water pipe line GI B – class with fittings 40 mm with rock wool compete 50 mm thick insurance of 48 kg/cu m density and K value = 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken mess etc 26SWG thick aluminum sheet. iv) Hot water pipe line GI B- class with fittings 25 mm with rock well compete 50 mm thick insulation of 48 kg/ cu m density and K value= 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken aluminum sheet. v) Hot water pipe line GI B- class with fittings 15 mm with rock wool compete 50 mm thick insurance of 48 kg/cu m density and K value= 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken thick aluminum sheet. vi) Cable of 2.5 mm sq. 2 core unarmored cable vii) Electrical back up control panel

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 Coarse Sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement : 4 Coarse Sand : 8 graded stone aggregate 40mm nominal size) and inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks with class designation 75. a) Inside size 90x80cm and depth from 45 cm upto 1.0 mtr. including fixing angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nominal bore by providing & fixing of Tee by cutting & threading the pipe complete

P/F Ball Valves (full way valve) made of cast brass, including handle. 15 mm nominal size

-------do------ 20 mm nominal bore

------do------ 25 mm nominal bore

P/F PTMT angle valve for basin mixture and Geyser points/washbasins of ‘Prayag Make’ 15mm nominal bore.

SATVIR GUPTA ENGINEERS AND CONTRACTORS