REPAIR/MAINT TO BLDGS AND CONNECTED WORKS IN AJITHNATH VIHAR AT NO 7 AIR FORCE HOSPITAL KANPUR CANTT

Amount

Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M & L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.06 sqm but not exc 0.11 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.18 but not exc 0.38 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.11 bt not exc 0.18 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size not exc 0.38 sqm as in skirting/dado set over and including 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for glazed coloured ceramic joint free tiles in vertical surface 600X300 mm size 7-8 mm thick or as required, set over and including 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for plain cement concrete type B1 (1:2:4) using 12.5 mm graded stone aggregate in filling to maintain the slope of roof or floor with liquid water proofing compound @100 ml per 50 kg of cement complete all as directed.

M&L for rendering 15 mm thick in CM 1:4 with liquid water proofing compound @100 ml per 50 kg of cement or as per manufacturer's instructions.

Supply only liquid water proofing compound

M&L for providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymer having Sun reflective Index (SRI) of 105 manufactured by Asian Paints Ltd or equivalent as approved by GE on top of concrete roof in three coats @ 10.76 Ltrs/10 Sqm. One coat of self priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coat of undiluted elastomeric water proofing liquid (dyr film thickness of complete treatment not less than 500 microns). The operation shall be carried out after scrapping and properly cleaned loosed particles with wire brushes, filed the crack upto 3 mm with fibre glass reinforced crack filling compound 10, complete in all respect as per the direction of Engineer-in-charge. Note :- Treatment shall be done through authorised rep of manufacturers using mechanical sprayer/Jet nozzles as directed by GE.

Dismantling of corrugated AC sheet in roof covering complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Taking down cement plaster on brick walls including raking out joints hacking for key scrubbing down with water etc.

M&L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for Rendering 15mm thick in Cement Mortar 1:4, finishing Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 in ceiling finished even and smooth without using extra cement all as specified.

M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash all as specified.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified.

M & L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of water base primer over JK birla white putty to have a even and smooth surface complete all specified and as directed.

M & L for preparation of new plastered surface and applying two coats of distemper oil emulsion over a coat of water base primer over JK Birla white putty to have a even and smooth surface complete all specified and as directed.

M&L for Preparing New Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls all as specified and directed.

M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of white / tined synthetic enamel paint all as specified and directed.

Demolition of PCC n. exc 15 cm thickness in floors, roofs or pavings and throwing debris at low lying area not exc 1 km complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 (40 mm graded aggregate) as in floors, pavings, 100 mm thick, spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Supply & Fixing aluminim dividing strips 38 mm width 1.5 mm thick complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection and courtyard, laid in slope 1:40, finished cement surfaces even and smooth with out using extra cement complete all as specified.

Dismantling structural steel work including doors, gates, cattle traps etc, but excluding framed truss etc.complete all as specified and directed.

M&L for Mild Steel Framed Work as Grills, Grating, etc. with ends of Bar shouldered and/or riveted or forged into Spikes, Framed Guard Bars and Similar Work, etc. conforming to Fe-290 Gde E-165 including all necessary drilling, bolting or riveting, etc., complete all as specified and as directed.

S&F rolled section as in main and cross beam hip and jack rafter purlins where connected to common rafter and running rail and guides for sliding doors fixed with angle cleat or other connections complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of white / tinted synthetic enamel paint all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

Dismantling of AC sheet as in ceiling with cover fillet complete all as directed.

M&L 16 mm thick of size 600 mm x 600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (belvelled tegular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section exposed surface with pre powdered coated capping, main runner and cross runner and to comprise main/Tee runner 15mmx38mm size, load carrying capacity 14 kg/sqm) spaced at 1200 mm centre to centre securely fixed to the structural soffit and flush fittings 1200 mm long cross/Tee runners to be interlocked between main runners at 600 mm c/c from 1200x600 module , cut sub cross/runner 600 mm require independent support. wall angles of size 19 mm x19mm, secured to the periphery of te wall at 450 mm maximum centers. The above grid is suspended at every 1200 mm c/c in both directions and starting from wall at the distance of 350mm from wall by using 3.5 mm dia aquiline wire with suitable fasteners and hook clips, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as specified and directed.

Taking down shutters of any description exc 1 but n exc 2 sq. m each, complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. (Make : Sintex/Rajshree/Accucell or equivalent)

S&F Plain,solid, straight, chowkats and frames of 2nd class hardwood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all complete and as directed.

Glazed and skeleton shutters of 2 nd class hardwood 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Glazed and skeleton shutters of 2 nd class hardwood 30 mm thick open rebated and prepared to receive glass, gauze, etc. divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 40 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded. complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts (exc half brick but not exc one brick) and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; ; clamps; hold fasts (ends including keys); wall ties; hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled mild steel 100mm complete all as specified and directed.

S&F Butt hinges, heavy weight cold rolled mild steel medium weight (75mm) complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C21(100mm) complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 100mm complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150mm complete all as specified and directed.

S&F aluminium anodised barrel tower boltsof extruded section, length of bolt in mm 200 complete all as specified and directed.

S&F in repair aluminium alloy anodized sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium alloy anodized sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

S&F extruded anodised aluminium alloy handles fabricated type 100mm complete all as specified and as directed.

S&F extruded anodised aluminium alloy handles fabricated type 150mm complete all as specified and as directed.

S&F in repair gun globe or gate valve for 15mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed.

S&F in repair gun globe or gate valve for 20mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down old steel tubing and removal from site, complete all as specified and as directed.

S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down old steel tubing and removal from site, complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections incl cleaning for re-fixing and re-fixing in new or old position (walls, ceillings, floors etc) complete all as directed by Eing-in-Charge.

Taking down 20 mm bore steel tubing and connections incl cleaning for refixing and re-fixing in new or old position (walls, ceilings, floors etc) complete all as directed by Eing-in-Charge.

S&F PVC lid in repair for water storage tank suitable for 500/1000 ltr capacity complete all as directed by Engineer in charge.

S&F in repair 15mm bore stop valves cast copper alloy fancy type CP screwed down high pressure with crutch or butter fly handles crewed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair kit ( float valve, handle etc ) for PVC low level flushing cistern 10 ltr capacity.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S&F in repair vitreous china squatting pan white Orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor complete all as specified and directed.

S&F in repairs PVC waste pipe with coupling 32 mm dia complete all as specified Make: Prayag oe equivalent

S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.

Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and supply and and fixing, hoisting PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia PTMT ball valve high pressure with epoxy coated alm rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for taking our vegetation/plants of any size from masonary wall, roof, staging for water tank etc at any position, derooting, chemical treatment using Glyphosphate/Triclopyr etc and making the disturbed surface using PCC 1:2:4, B-0 (using 12.5 mm graded aggregate or CM 1:3 all as directed by Engineer-in-Charge.

S & Fixed in repair Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including Taking out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

M&L for granite stone 18-20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20 mm thick screed bed in CM 1:6 including dismantling of old stone slab/tiles, Complete all as specified and directed.

S&F of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified. Cera Cat part No F5003103 or equivalent in Essco

S&F 3.00 mm thick figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply & fix in repairs fancy type stainless steel soap dish,fixed to plugs with chromium plated brass screw complete all as specified and as directed.

M&L aluminium drapery rod of 19/20 mm dia including end caps at both ends and fixing arrangement (minimum 6 Nos for each curtain rod) complete (Make : Vista or equivalent)

Supply & fix in repair of stainless stee plate rack of size 36"x36"x10" made with stainless steel sheet of 20 gauge thick to key size as specified including fixing steel screws complete all as specified & directed by Engineer-in-Charge. Make Blue Star latest catalogue/Anjali as approved

S&F PVC 110mm bore pipes in any length with tubber ring joints fixed to wall with dash through fasteners and clamp of 25 x 3mm FL incl all fittings like sockets, bend, junction, elbow etc. (Make : Supreme/Prince/Kissan)

All as per item No 98.00 above but bore of pipe 75 mm

S&F 110mm PVC (SWR) bends. (Make : Supreme/Prince/Kissan)

S&F 75 mm PVC (SWR) bends. (Make : Supreme/Prince/Kissan)

PVC (SWR) branch piece, Single (single Y) equal or unequal for 100 mm bore. (Make : Supreme/Prince/Kissan)

S&F in repairs waste coupling of 40 mm PTMT (half of full threaded) (min weight 32- 45 gms) complete all as specified.

S&F in repair hasp and staple 150 mm size , safety type, Aluminium anodised, with mild steel hinge pin incl bolt to hinge plate and fixed with screw.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20mm Graded Stone Aggregate) as in Floors, etc and finished the Cement Concrete surfaces even and smooth with using extra cement, complete all as specified and as directed.

M&L for 25 mm thick Cement Concrete type B-1, 1:2:4 (using 20mm Graded Stone Aggregate), as in sub fase of floor tiles etc, complete all as specified and as directed.

Removing excavated (soil) materials and deposited out of MD land.up to a distance of 15 km all as per directed.

Re-securing or easing & adjusting wooden door shutters of any description, without taking down exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Re-securing or easing & adjusting wooden door shutters of any description, without taking down not exc 1 sqm each complete all as specified and directed.

M&L 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor in repairs complete all as specified and directed.

S&F in repairs 19/20 mm thick pre-laminated particle board medium dencity both sides fixed with screws to timber frame work as in shutter cup board, self etc incl 4 mm thick leaping all around.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodised.

Supply & fix stainless steel butt hinges medium weight 75 mm size complete all as specified.

S & F Continuous (piano) hinges,30 mm width of flaps brass, bright finish or electro galvanised complete all as specified and directed.

Supply & fix PVC bath room mirror cabinet with looking glass mirror of overall size 455x355mm of approved colour and pattern all as directed Make Polytuf 5112/prayag 551 or equivalent.

ESKEY COMPANY

SAXENA BANDHU

Lalta Prasad vijay kumar Forwarding Agency

GOPI CONSTRUSTION CO.

JOG CONSTRUCTION

High Tech Metal India