Estimate for Construction of Escape Regulator at RD 20450 of Ladhuka Disty

Amount

Dismentling of Brick Masonary in 1:3 CSM (CSR Item No. 8.5 (b) )

Dismentling of Coping

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Laying cement concrete 1:3:6 Nominal mix in foundation with crushed stone aggregates 40 mm. nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days (CSR Item No. 21.4)

Reinforced Cement Concrete M-25 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture. (CSR Item No. 21.32 F i)

Reinforced Cement Concrete M-20 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture. (CSR Item No. 21.32 E i)

Plain Cement Concrete M-15 in Open Foundation complete as per Drawing and Technical Specifications. (CSR Item No. 21.7 A)

Reinforced Cement Concrete M-30 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture. (CSR Item No. 21.32 G i)

Reinforced Cement Concrete M-40 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture. (CSR Item No. 22.1 E a)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.(CSR Item No. 22.2)

Supply and Laying of Sand

Supply and laying dry Brick Ballast as graded filter beneath CCM Blocks (CSR Item No 10.30)

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44)

Providing and fixing skin Plate 10mm

Providing and fixing ISMB 200

Providing and fixing MS Plate 8 mm thick

Providing and fixing ISMC 200

Providing and fixing MS Plate 10 mm thick

Providing and fixing MS Plate 15 mm thick

Providing and fixing Bottom Seal clamp plate MS Flate 70x10 mm

Providing and fixing Side Seal clamp plate MS Flate 50x10 mm

Supply of Spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55 mm dia.

C I Housing cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 1.5 ton capacity

Supply and fixing of spindle cover

Providing and Fixing Square bars 25x25 mm

Supply and fixing stainless steel bolts, csk screws and nuts (for seals of all types) with washer of all sizes and length required as per sample /drawing /direction of Engineer in charge complete in all respect.

Supply and fixing of common shaft duly machined at site complete in all respect and to entire satisfaction of engineer in charge

Commisioning & testing of Gates at site complete in all respect and to entire satisfaction of Engineer in charge

Fixing of coupling for common shaft with supply of spindle shaft coupling rods and cover plate complete in all respect and to entire satisfaction of engineer in charge

Fixing and holding gate with 35 tonne capacity crane

Providing gate wheel assembly complete in all respect to entire satisfaction of engineer in charge 200mm dia

Assembling and fixing in position gate wheel assembly complete in all respect to entire satisfaction of engineer in charge

Providing Grease Nipple

Providing and fixing MS Plate 16 mm thick

Providing and fixing ISMC 150 mm (For Column)

Providing and fixing Stifefner Plates 6 mm thick

Providing and fixing ISMB 250 mm

Providing and fixing ISMC 200 mm

Providind and Fixing chequered plate 6 mm thick

Providing and fixing ISA 55x55x6 mm

Providing and fixing ISA 65x65x6 mm

Providing and fixing GI Pipe 40 NB (For Railing)

Providing and fixing ISMC 150 mm

Providind and Fixing MS plate 20 mm thick

Providind and Fixing S.S plate 8 mm thick

Providind and Fixing Anchor 16 mm

Providind and Fixing ISMB 250 mm

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade after Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting one coat with readymixed paint of metallic surfaces in all shades on old steel or iron works after Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Providing and Fixing Roller Pin

Supply of Multipurpose syn, hetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge

Supply of Diesel

Supply of Mobile Oil

Any Other Item

JASKARAN SINGH GILL CONTRACTORS