Drilling of borewell, fixing of motor and pipeline work at Sanklapur area and Ambedkar nagar, Sirsinakallu area in ward no 21 and Chitwadgi kurubar oni and govindanagar near madivalappa gudi in Ward no 01 in Hospet limit.

Drilling of borewell, fixing of motor and pipeline work at Sanklapur area and Ambedkar nagar, Sirsinakallu area in ward no 21 and Chitwadgi kurubar oni and govindanagar near madivalappa gudi in Ward no 01 in Hospet limit.

Geophysical investigation of site for Sinking borewell of for supplying drinking water to the habitation either through the hand pump MWS or PWSS by vertical electrical sounding by adopting venner or...

Sinking of Borewell of 150mm dia clear using super fast hydraulic rig of capacity 250 PSIG above 900 CMF above in all strata including over burdern upto 20M. Fixing of casing pipes collars and cap w...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern. Fixing of casing pipes collars and cap with nece...

Cost of 160 mm dia PVC Casing pipe

Supply of Bore cap

Supply of GI clamp set

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia 4 inch suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of enginee...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments. 1x3x2.5 S...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

Supply installing testing and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Volt...

Supplying laying jointing testing and commissioning of G.I. Pipes conforming to IS 1239 1990 with latest amendments including fixing Collars Elbows Tees bends Glad Cocks and other Fittings Excluding C...

Supplying laying jointing testing andcommissioning of G.I. Pipes conforming to IS 1239 1990 with latest amendments including fixing Collars Elbows Tees bends Glad Cocks and other Fittings Excluding Co...

Providing wrought mild steel galvanized 15 mm dia GI collar confirming to IS 1239-II 1991 with latest amendments if any. For 40 mm dia GI collar

Supply and delivery at site wrought middle steel galvanized GI bend confirming to IS 1239-II 1991 with latest amendments if any For 40 mm dia GI BEND

Supply and delivery at site wrought middle steel (galvanized) GI Socket confirming to IS 1239-II, 1991 with latest amendments if any.. For 40 mm dia GI Socket

Supply and delivery at site wrought middle steel galvanized GI Union confirming to IS 1239-II 1991 with latest amendments if any. For 40 mm dia GI Union

Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any.

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 40 mm

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting Cement Concrete Road surfac...

Earth work excavation for pipelines/cables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights remova...

Supplying laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Refilling available earth around trenches/pipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m....

90X63 MM ELECTRO FUSION REDUCER

90 MM ELECTRO FUSION TEE

90 MM ELECTRO FUSION COUPLER

90 MM ELECTRO FUSION ELBOW

Supply of GI Bend 20 mm Dia