Construction of Atal Bus Stand (B-Type) at Tuguripali under Rajgangpur Block, Sundergarh

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000008 "Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. " Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

First Floor

Second Floor

Third Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

First Floor

Second Floor

Third Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

First Floor

Second Floor

Third Floor

50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor

First Floor

Second Floor

Third Floor

50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor

First Floor

Second Floor

Third Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

First Floor

Second Floor

Third Floor

50000495 Fly Ash brick masonry in cement mortar 1:4 (1 cement:4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sq. cm with dimensional tolerance +/-2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

First Floor

Second Floor

Third Floor

50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor

First Floor

Second Floor

Third Floor

50001633 Supplying & fixing of 25mm thick expansion joint sheet including cost of all labour,material atc all complete as per the direction of the engineer-in-charge. Ground Floor

50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor

50005591 Providing GRC readymade cladding including material, labour, transportation etc. complete. as per the direction & instruction of the [E.I.C][N.S.W.I] Ground Floor

First Floor

Second Floor

50010038 "Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) between columns and walls with framing and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with structural steel frames of appropriate size and specification as required for frame work, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rates are included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3) :2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture c ontent, water absorption<(><<)> 5% of dry weight.[NEW-NSWI] Ground Floor

First Floor

Second Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

First Floor

Second Floor

Third Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

First Floor

Second Floor

Third Floor

50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor

First Floor

Second Floor

Third Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor

First Floor

Second Floor

Third Floor

50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor

First Floor

Second Floor

Third Floor

50010432 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE) Ground Floor

First Floor

Second Floor

50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor

50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor

First Floor

Second Floor

Third Floor

50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) First Floor

Second Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

First Floor

Second Floor

Third Floor

50010518 Supplying fitting fixing of GRG ready made cornices of 100 mm thick including screw and adhesive to all the cornices. Make:-Aerolite/Ramco Hilux board . Ground Floor

First Floor

50010554 Providing, supplying and fixing of UPVC Glazed Fixed Louvered Ventilator of size 600 mm X600 mm made out of multi chambered UPVC of DUROPLAST / SIMTA ASTRIX / NCL VEKA having isolated drainage, holes about 8 mm dia. to be provided @ 300 mm C/C outer side of lower sashes and reinforced with Galvanized Iron profiles throughout the window with Fan(185mm)of USHA / CROMPTON/Havells/Anchor. The outer frame having an overall size of 39 mm x 39 mm x 2.2 mm thickness with reinforcement of 1.2 mm . Ventilator shall be provided with 4 mm Pin Head glass, standard hardware. Wall thickness of frame and Mullion shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work with transportation and wastage. Ground Floor

Second Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

First Floor

Second Floor

Third Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

First Floor

Second Floor

Third Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

First Floor

Second Floor

Third Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

First Floor

Second Floor

Third Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

First Floor

Second Floor

Third Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

First Floor

Second Floor

Third Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

First Floor

Second Floor

Third Floor

50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor

First Floor

Second Floor

Third Floor

50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor

First Floor

Second Floor

50010692 Providing and Fixing of ISI marked 30 mm thick Flush Door Shutters (Double leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 8 Nos SS butt Hinges (125mm x 85mm x 5.5mm), 4 Nos SS Tower Bolt(250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 2 No Floor type double doorstopper, 4 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 2 Nos. Back Buffer with all materials, adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Ply (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). First Floor

Second Floor

50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor

First Floor

Second Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

First Floor

Second Floor

Third Floor

50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Second Floor

Third Floor

50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor

First Floor

Second Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

First Floor

Second Floor

Third Floor

50010851 Providing and fixing of 12mm thick toughened glass door for glass partition with patch fitting, the glass edges will be high polish for all the sides with cutting hole for top patch, bottom patch ,lock and 12 inch SS handle. The patch fitting will be SS 304 grade with high quality floor spring make as per ISI certification. The price including of lifting of glass up to 5th floor, transportation and installation. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings :-Godrej. Ground Floor

First Floor

Second Floor

50010863 Supplying all materials and labour for making Full Partition wall with 10mm thick Toughened glass as per approved design and specifications. Edges of glass is to be well polished, fixed with necessary hardware, including cost, conveyance, loading, unloading of all materials, cost of all labour, scaffolding, staging (if required) for the works etc. complete in all respect. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings –Godrej. Ground Floor

First Floor

Second Floor

50010915 Providing, fitting and fixing of Gypsum false ceiling with Aluminium anodised T section no. 3215 with 2feet center to center, L section no. 1705 up to 15 microns on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2 feet x 2 feet suspended from ceiling etc. complete including cost of 12.5mm thick Gypsum board, all labour and material etc. complete. Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Gypsum board Make:- India Gypsum (SAINT GOBAIN) / USG Boral . Ground Floor

First Floor

50010951 Providing and fixing low height partition using aluminium extruded rectangular tube of 38.10mmx25.40mmx2.41mm of horizontal and vertical frame of requisite size as per detailed drawing and specification, whereas aluminium frame members to be placed one at floor level. 2nd at 600mm horizontally and vertically not more than @ 600mm center to center, with 2 nos of members at ends of partition and fixing be 12mm WPC of above said make grade ply up to a height of 3 feet from floor level conforming to IS 303 of approved quality finished with a combination of 1mm thick laminate complete of approved shade on both side of partition of Premium quality with all exposed area of edge of partition with teak wood moulding with melamine finish and fixing of 12mm thick toughened glass of Premium quality with etching/ frosted film as per the detailed drawing including labour, material, T and P, wastage, transportation, etc. all complete. (NSWI) Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Laminate Make: Greenlam/ Centurylam ,Marino all Glass work:- Saint-Gobain/AIS (ASAHI). Second Floor

50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor

First Floor

Second Floor

First Floor

Second Floor

Third Floor

First Floor

Second Floor

50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

First Floor

Second Floor

50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

First Floor

Second Floor

Third Floor

Third Floor

50011948 Supply and installation of ZMS (Nylon)/Vibrance Serene series cubicles of width and depth as per specifications/ site drawings and height of 2000mm. The cubicle is made from solid grade 12mm thick compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. All doors of size 600x1800mm will be of single colour and made of 12 mm thick HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 nos Nylon PA-6 made hinges affixed to the pilasters. Nylon PA-6 made coat hook and lock set are provided with each door. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Aluminum made door stopper profiles with rubber linings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs. The bottom gap is 150 mm. All intermediate partitions or dividers of 1800mm hight will be made of 12 mm thick HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the system. The Semi-spherical (Top) head frame structure for surface protection of size to be 50x32x1.6T, Corner joinery section size to be 40x16.5x1.8T,U-Channel Wall joinery section size to be 22x16x1.6T,Door stopper section size to be 21x12.5x1.6T. Nylon Polyamide grade-6 Adjustable Pedestal Footing of base minimum diameter 70 mm, giving a clearance height of 150mm. Self closing Hinges (Gravity mechanism) made from Nylon Polyamide grade-6. Round Coat hook with base diameter 53 mm made from Nylon polyamide grade-6. Round Door knob diameter 48 mm with thumb-recess made from Nylon polyamide grade-6. Rotating Thumb-turn locking system with privacy indicator locking system made from Nylon polyamide grade-6, Anti-noise rubber padding, Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs. The cost includes supply, installation, transportation, handling charges completely. Make complete set:MERINO/GREENLAM Ground Floor

First Floor

Second Floor

50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor

Second Floor

50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor

50012663 Single leaf 2 hour rated Metal Fire door Providing and fixing,testing of fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in accordance with ISO/IEC 17025. The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip . The frame should also be provided with fire rated EPDM smoke seal 20x4 mm conforming to IS: 3614:2021 or as per test evidence. It shall be fixed in grooves, specifically cut in rebate on all the 3 sides of the frame.. All provisions should be mortised & provided with necessary inbuilt reinforcement to receieve appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note :- For grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Single leaf insulated fire rated door of FD 120 classification IS 3614:2021 with 120 minutes integrity and 30 minutes insulation - For staircase/exit pathway application / Refuge area. – Door frame fixed to exit opening with 10 nos. fasteners and door assembly must be provided with 1 no. single point panic bar and external trim with key cylinder, 1 no. door closer with spring. Every Glass pane must carry a permanent marking of its glass manufacturer . (Make :-TATA Pravesh) Ground Floor

First Floor

Second Floor

Third Floor

50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor

First Floor

Second Floor

50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor

First Floor

Second Floor

Third Floor

50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor

First Floor

Second Floor

50014157 EXTERIOR ALLUMINIUM CLADDING: - Design, supply and installation of Aluminium Honeycomb panels cladding of Alstone as per design and as directed by engineer in charge. Panels shall have minimum 12mm thick with aluminium skin on both sides and aluminium core material inside. Front skin shall be 0.7mm thick with PVDF colour and back skin with 0.5mm thick polyester primer finish. System shall consist of all fixing accessories and structural sealant as per specification, shop drawings. Honeycomb panels shall be installed on sub frame designed with aluminium vertical mullions of 40 x 40 x 2mm as per panels module. Vertical mullions shall be installed on to wall brackets of size 50 x 50 x 100 x 5mm at intervals of 1200 mm c/c fixed to RCC structure. 25 x 25 x 2 mm horizontal transoms shall be fixed on to main mullions as per elevations drawing modules and as directed by Engineer in charge. Honeycomb panels shall have inbuilt fixing arrangement having continuous extrusion along the panels. Alstone aluminium Honeycomb panels shall be designed and manufactured with 19mm dia aluminium perforated core material sandwiched between two aluminium skins. Front skin of 0.7mm and back skin of 0.5mm. Panels shall be manufactured to below specifications. Front side: Alloy AA3003/AA3105, Backside: Alloy Aluminium Alloy 3000 series. Make: Alstone Ground Floor

10000556 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH. Ground Floor

10000564 Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor

10000570 Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor

10000583 Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSB Ground Floor

10000588 Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme. Ground Floor

10000594 Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/Aerolex Ground Floor

10000596 Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation). Ground Floor

10000600 Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete. Ground Floor

10000602 Installation charges pump set with all accessories including transportation etc. Ground Floor

10001184 Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEX Ground Floor

10001190 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP, Single phase,32D,19 Stage (head 50-129m). Make: KSB(2C/21). Ground Floor

10001204 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.7.5HP, Three phase, 100x75, Open well (head 14-29m) make: KSB ( MR7.5A/50X40X45) Ground Floor

50014370 Supply & fixing of Rapid Bus Wash Systems -3BT which is a self-propelled, fully automatic controlled wash unit with double side brush rollers with 360 washing solution. Installed on a washing bay of length 20 mtr and width 6 mtr along with necessary R.C.C work with water proofing and tilling complete flooring with slab as per drawing design and construction of foundations, drains, drain sumps, supports of all types, platforms, drain channels.3-brush system made of Imported polyethylene X Profile Bristle brushes (1 horizontal and 2 vertical brushes) in Fully Galvanized Interior and Exterior Frame Structure having Balanced GI pipe roller (automatic/manually operated), Stainless Steel 0-degree Nozzle for 360 washing (front, Rear, Top and Bottom) with inbuilt Dosing Systems for Shampoo, Counter Following Systems ,6 mm Heavy Wire Rope Systems, VFD Control System for smooth operation, Brush load sensor for any proper water pressure flow, Traffic light and Guide Rail for safe movement of machine, Two Vertical hinged brushes with pneumatic shock, dampening systems, Controlled systems – Onboard controlled panel, PLC Control System, Caterpillar 3 Pole Slide on suspension cable and hose handing systems and Switch gear installed on a Guide Rail mounted on the washing bay. The main features are Floor Mo unted Trolley, Energy Chain System, Structure Body painted with High Gloss Automotive Paint, Anti-Tilt and Anti Derailing Mechanism, Space Saving Trolley Design, Semi-Assembled System for quick installation, Trolley Speed of 10 - 15 m/min, PLC Controlled Automatic System, Very sensitive Control system for safety of the vehicle, VFD Controlled Drive, Horizontal Brush, High Penetration IP67 Sensors, Touch Screen Operation, On board Control Panel, Automatic / Manual Model Contour Following Top and Vertical Brushes, High Quality PE bristle Brushes, Stainless Steel / PPE Nozzles, Stainless Steel Piping, Entry Point Under Chassis Wash Equipment, TWE 3BT Equipment Height Extension up-to (4.1m, 4.6m, 5.1m), Exit Side Blowers 30 HP, Backlight Wash Cycle Display, 3 years Spares kit,LED Bay Lights, 1 and 1.5 HP With Gear Box, 2HP Mono Block pump 1no Body mount inbuilt 3phase 420-volt AC supply having IP 55, Brush Pressure Sensing by Latching Units Systems. CONTROL PANEL 1. Quantity : 1 Lot 2. Cable : Cabling for lights & Pump 3. Conduit : to be placed under civil 4. Panel Box : Inclusive of voltmeter, lamp, VSS, MCB etc. 5. Type : Wall Mounted EQUIPMENT DIMENSION 6. LENGTH-13 MTR 7. WIDTH- 2.7 MTR 8. HEIGHT-3.8 MTR E-INTER CONNECTING PIPE WORKS 9. Quantity: 1 Lot 10. MOC: uPVC 11. Schedule 40 12. Valves & Fittings: Upvc/ brass B-WORK UNDER CUSTOMER SCOPE as layout. 1. Power supplies: 415V Three Phase 63 Amp Distribution 2. Water Tank: 5000 Ltr and 1 Inch connection to Machine 3. Hydra: For unloading machine and installation. 4. Space for Equipment’s storage Make: Honda Wash System/ Ginie/Varadom Technologies[N.S.W.I] Ground Floor

50004798 Supplying & fixing of Godrej make 3-Seater Chair, Model No-PERCH (Company - 5000) FUBPMIX3027S0HGF - 3 Str(LN Code-56101602SD0 0001).[NSWI] Ground Floor

50004800 Supplying & fixing of Godrej make 2-Seater Chair, Model No- PERCH (Company - 5000) FUBPMIX3219SSHGF - Nano Perch (LN Code-5610 1602SD00002).[NSWI] Ground Floor

50007215 Providing & fixing of Godrej Enterprise 1200 without CPU Hanger (1200 x 600 x 728) Table s per the direction of the E.I.C .[N.S.W.I] Ground Floor

50010482 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- Aero (Large Seat) Black Ink Color FK01(56101522SD04692) +(561015 22SD04353).[NSWI] Ground Floor

50010484 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- OXBO MID BACK CHAIR 7502RGC01 Black Ink Black56101522SD03157.[NSWI] Ground Floor

50010486 Supply and fixing of GODREJ MAKE VISITOR CHAIR MODEL NO- 10071007XXC01 Black Ink C01 (56101522SD02696).[NSWI] Ground Floor

50010494 Supply and fixing of GODREJ MAKE CENTER TABLE MODEL NO-FUPISACT030SXXXX-CenterTable(56112105SD00104).[NSWI] Ground Floor

50010496 Supply and fixing of GODREJ MAKE SIDE TABLE MODEL NO-FUPISAST030SXXXX-SideTable(56112105SD00105). [NSWI] Ground Floor

50010498 Supply and fixing of GODREJ MAKE ALMIRAH MODEL NO-Storwel Plain1981H x 916W x 486D (30161806SD00046). [NSWI] Ground Floor

50010502 Supplying and fixing of GODREJ MAKE TV CREDENZA WITH CUP BOARDUNIT MODEL NO-MERAKI Media Unit Brn/Beige 180.4LX49.5DX50.4HCM9(561015 05SD00125).[NSWI] Ground Floor

50010566 Providing, fabricating and installing L shaped executive table,overall sizeof (1800mmx1800mmx750mm)asper theapproveddesign made up 19mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. Allinternal surfaces shall be finished with balancing laminate of0.8mm thick, matching with the approved shade of laminate intable without any visible joint, groove, with 3nos drawers,1 no cup board,Key board tray provision using 12" triple slidetelescopic channel. There should be adequate space for CPU,UPS complete in all respect including necessary fittings,fixtures,transportation, labour, materials, etc. Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[NSWI] Ground Floor

50010568 Providing, fabricating and installing reception table, overallsize of (2100mmx600mmx750mm) as per the approved design made up18mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. All internal surfacesshall be finished with balancing laminate of 0.8mm thick,matching with the approved shade of laminate in table withoutany visible joint, groove, with 2nos drawers,2 nos cup board,led light strip on front side complete in all respect as perdrawing and design including necessary fittings, fixtures, transportation, labour, materials, etc.Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[N.S.W.I] Ground Floor

50013320 Supplying and instllation of 4 seater dining table of PU Coated size shall be 1135 (L) mm x 1175 (W) mm x 750 (H) mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .Make: GODREJ 4 seater ,Model-TIMEOUT, HSN CODE-94031010 Ground Floor

50013340 Supplying and instllation of dining chair having Seat and Back made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Make: GODREJ ,Model-UNWIND, HSN CODE-94016900 Ground Floor

50013380 Supplying and installation of 3 seater sofa of seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understruCture for support and additional cushioning purpose should be a welded assembly made in Stainless steel (grade SS 202) tube & plate.Make: GODREJ 3Seater sofa ,Model-PISA , HSN CODE-94017100 Ground Floor

50013390 Supplying and installation of 2 seater sofa of seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understruCture for support and additional cushioning purpose .t should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Make: GODREJ 2Seater sofa ,Model-PISA , HSN CODE-94017100 Ground Floor

50013400 Supplying and installation of 1 seater sofa of seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understruCture for support and additional cushioning purpose should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Make: GODREJ 1Seater sofa ,Model-PISA , HSN CODE-94017100 Ground Floor

50013460 Supplying and installation of study chair with desklet having Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The "L" shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Make: GODREJ study chair with desklet and under paper tray ,Model-UNWIND , HSN CODE-94016900. Ground Floor

50014310 Bed:APO Bunk Bed+Mattress with Pillow Providing, supplying and placing of Bunk Bed BED FRAME BED FRAME ASSEMBLIES 2 NOS. ARE WELDED OF SIDE FRAME & INNER SLAT. THE SIDE FRA ASSEMBLY ARE MADE OF RECT. TUBE 50.8 x 25.4 X 1.2MM. ASSEMBLY INNER SLAT IS SQ. TUBE OF 25.4 X 1.2 MM THK MS ERW TUBE IS:7138 GRADE.HEAD BOARD & TAIL BOARD MOSOITO ROD:-HEAD BOARD & TAIL BOARD ARE MADE UP OF SO. PIPE 38.1 X 1.6MM THK, SQ 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 GRADE SUPPORT BRACKET 3.2MM THK MS SHEET IS: 513 AND CONNECT WITH BED FRAME WITH MA NUT &BOLT,MOSQUITO ROD OF $19.0 X 1.0 MM THK MS ERW TUBE TO BE FIT IN #22 X 1.0MM THK MS ERW TUBE & BOTH TUBE IS OF IS: 7138 GRADE, HOOK IS PROVIDED AT THE TOP OF ALL ROD. LADDER ASLY - LADDER ASSY IS MADE UP OF RECT 50.8 X 25.4 X 1.2MM THK & SO. 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 & CONNECTED WITH BED FRAME SIDE SUPPORT :- SIDE SUPPORT IS MADE OF #25.4 X 1.2MM THK & #19 X 1.2MM THK TUBE CONNECTED WITH BED FRAME USING MB NUT & BOLT. CLADDING -12mm THK PLY.HSN CODE-94032090 Ground Floor

10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor

10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor

10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor

10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor

10001062 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes. Ground Floor

10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor

10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor

10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor

10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor

10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor

10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor

10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor

10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor

10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor

10001096 Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning. Ground Floor

10001098 "Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX "110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor

10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor

10001102 Fixing of Back to wall WC with UF soft close seat cover, hinges, accessories set with rack bolt 12mm dia stainless steel Size(360x51 5x410mm) (FOR DISABLED) Floor Mounted to the floor fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification WITHOUT CISTERN. make: JAQUAR (DIS-WHT-9 3955P180UF)/ KOHLER(K-2983IN-S-O) DISABLED PERSON COMMODE Ground Floor

10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor

10001118 Providing and fixing stainless steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 600X450X225mm Steel Sink Matt single bowl. Make: (Parry ware(C857272)/Hindware(KS FLAMINGO)). Stainless steel kitchen sink - 600X450X225mm Single bowl. Ground Floor

10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor

10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor

10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor

10001128 Providing and fixing of 50mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 50 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor

10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor

10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor

10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor

10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor

10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor

10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor

10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor

10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor

10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor

10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor

10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor

10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor

10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor

10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor

10001170 Providing and fixing of Metropole flush valve dual flow,32mm concealed body with exposed shutoff provision and 100mm square plate, 3.0/6.0 litre per flushing. Make: JAQUAR (FLV-1085 NSQ),fixing accessories with accessories set. Concealed Flushing Cistern. Ground Floor

10001172 Providing and fixing of 692mm long stainless steel grab bar handle (FOR DISABLED)fixed to head less socket caps, wall plugs and chromium plated screws as per specification . Make: JAQUAR (WAC-WHT-BR0600N) 692mm long stainless steel grab bar handle. Ground Floor

10001174 Providing and fixing of stainless steel vertical swing grab bar (FOR DISABLED) fixed to head less socket caps, wall plugs and chromium plated screws as per specification. Make: JAQUAR (WAC-WHT-BG0800N) Stainless steel vertical swing grab bar. Ground Floor

10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor

MIS-CVL-AREAFILLIN

50001726 Supplying, filling or Spreading of filling sand by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge. Ground Floor

MIS-CVL-BOONDARYWA

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

MIS-CVL-BOUNDARYWA

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor

50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

MIS-CVL-CHAMBER

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

MIS-CVL-COWCATCHER

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50005727 Prividing,Fittin & fixing of cow catcher,made out of steel work (TATA make GI pipe circular hollow of 100 mm OD as per IS 1239[P-1] 4 mm thick) including RS joist of size ISLB 150X80 with cutting requird size ,welding using MS flat of 40X6mm size,fixing in position with approvd design and specification including all fitings and applying a priming coat of approvd steel primer etc all complete as per the direction & instruction of the Engineer-in-charge of the work.DATA FOR size 16'X5'= 80 sft Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

MIS-CVL-DGSHED

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000008 "Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. " Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor

MIS-CVL-DISMANTALI

50000082 "Dismentalling of brick/stone masonary in cement motar including stacking the useful materials for reuse and removing the debries with in 50 mtr lead. " Ground Floor

50000084 "Dismentaling of R.C.C.columns,beams,slab,staircase,landing and lintels including stacking the useful materials for reuse within 50 mtr.lead. " Ground Floor

50000085 "Dismentaling & removing Doors,Windows and ventilators including removal of frames,hings,fastening & stacking the same for reuse and removing the debries within 50mtr. lead." Ground Floor

MIS-CVL-DRSHED

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000008 "Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. " Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

First Floor

Second Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

First Floor

Second Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

First Floor

Second Floor

50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor

First Floor

Second Floor

50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor

First Floor

Second Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

First Floor

Second Floor

50000495 Fly Ash brick masonry in cement mortar 1:4 (1 cement:4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sq. cm with dimensional tolerance +/-2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

First Floor

Second Floor

50000568 Kotah stone flooring in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. Ground Floor

50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor

First Floor

Second Floor

50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor

50005591 Providing GRC readymade cladding including material, labour, transportation etc. complete. as per the direction & instruction of the [E.I.C][N.S.W.I] Ground Floor

First Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

First Floor

Second Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

First Floor

Second Floor

50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor

First Floor

Second Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor

First Floor

Second Floor

50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor

First Floor

Second Floor

50010432 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE) Ground Floor

First Floor

50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor

50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor

First Floor

Second Floor

50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

First Floor

Second Floor

50010554 Providing, supplying and fixing of UPVC Glazed Fixed Louvered Ventilator of size 600 mm X600 mm made out of multi chambered UPVC of DUROPLAST / SIMTA ASTRIX / NCL VEKA having isolated drainage, holes about 8 mm dia. to be provided @ 300 mm C/C outer side of lower sashes and reinforced with Galvanized Iron profiles throughout the window with Fan(185mm)of USHA / CROMPTON/Havells/Anchor. The outer frame having an overall size of 39 mm x 39 mm x 2.2 mm thickness with reinforcement of 1.2 mm . Ventilator shall be provided with 4 mm Pin Head glass, standard hardware. Wall thickness of frame and Mullion shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work with transportation and wastage. Ground Floor

First Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

First Floor

Second Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

First Floor

Second Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

First Floor

Second Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

First Floor

Second Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

First Floor

Second Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

First Floor

Second Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

First Floor

Second Floor

50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor

First Floor

50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor

First Floor

50010692 Providing and Fixing of ISI marked 30 mm thick Flush Door Shutters (Double leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 8 Nos SS butt Hinges (125mm x 85mm x 5.5mm), 4 Nos SS Tower Bolt(250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 2 No Floor type double doorstopper, 4 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 2 Nos. Back Buffer with all materials, adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Ply (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor

50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor

First Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

First Floor

Second Floor

50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor

First Floor

Second Floor

50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor

First Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

First Floor

Second Floor

50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor

First Floor

First Floor

First Floor

Second Floor

First Floor

Second Floor

50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

First Floor

50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

First Floor

Second Floor

50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor

First Floor

50012188 System Aluminum Casement System Door: Double Leaf Hinged single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wav e treated siliconised EPDM gasket. The casement systems having hardwares SS butt hinge, mortise handle, mortise lock with both side key cylinder, concealed latch & door closer. Wall Thickness - Aluminium: 1.5mm.The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor

50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor

First Floor

50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor

First Floor

Second Floor

50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor

First Floor

MIS-CVL-FOUNTAIN

10001275 Supply and fixing of Water Fountain made from Indian White Base Marble, height is 8ft and outer diameter of pond is 20ft, along with necessary R.C.C work with water proofing and tilling complete flooring with slab as per drawing design and constructions of foundations, drains, drain sumps, neutralization sum supports of all types, platforms, drain channels, plants building and mass concreting of units . In middle pedestal 4 nos horses, centerflower vase all made up of marble stone(total height 8ft from base). The width of pond wall should approx.1ft, depth of pond 2ft with all complete civil work and following features provision. a) RECIRCULATION PUMP: - 1. No. of Pump : 1 no. 2. Type of Pump : Open Well Submersible 3. Phase : 3 Phase. 4. Voltage Range : 420 Volt. 5. Protection : IP 68 6. Impeller : Cast Iron 7. Motor Body : Cast Iron 8. Make : Kirloskar/Wilo/ Eqv. 9. Rating : 12.5 Hp b) RING 4.5 M DIA 1. Quantity : 1 No 2. MOC : GI Class-B 3. Dia. : 50 mm 4. Inlet : 2 Nos 5. Accessories : Gaskets, Supports etc. 6. Shape : Ring c)NOZZLE FOR 4.5 M RING 1. Quantity : 6 Nos 2. Dia. : 25 mm 3. MOC : Gun Metal Chrome Plated d)RING 3.0 M DIA 1. Quantity : 1 No 2. MOC : GI Class-B 3. Dia. : 50 mm 4. Inlet : 2 Nos 5. Accessories : Gaskets, Supports etc. 6. Shape : Ring e)NOZZLE FOR 3.0 M RING 1. Quantity : 30 Nos 2. Dia. : 15 mm 3. MOC : Gun Metal Chrome Plated f)RING 1.5 M DIA 1. Quantity : 1 No 2. MOC : GI Class-B 3. Dia. : 50 mm 4. Inlet : 2 Nos 5. Accessories : Gaskets, Supports etc. 6. Shape : Ring g)NOZZLE FOR 1.5 M RING 1. Quantity : 15 Nos 2. Dia. : 15 mm 3. MOC : Gun Metal Chrome Plated h)NOZZLE FOR CENTER 1. Quantity : 1 Nos 2. Dia. : 40 mm 3. MOC : Gun Metal Chrome Plated i) LED LIGHTS 1. Quantity : 31 Nos 2. Type : RGB LED 3. Power : 18 Watt 4. Protection : IP 68 5. Beam Angle : 90 Deg. 6. Shape : Round 7. MOC : SS 304 8. Tempered Glass : 8 mm j)CONSTANT VOLTAGE DRIVER FOR LIGHT 1. Quantity : 4 Nos. 2. Power : 12 V. 3. Watt 200 4. Current : 220 V. A/C k)AMPLIFIER FOR DMX CONTROLLER 1. Quantity : 1 Nos. 2. Current : 220 V. A/C l)CONTROL PANEL WITH ELECTRICALS 1. Quantity : 1 Lot 2. Cable : Cabling for lights and Pump 3. Conduit : to be placed under civil 4. Panel Box : Inclusive of voltmeter, lamp, VSS, MCB etc. 5. Type : Wall Mounted m)INTER CONNECTING PIPE WORKS 1. Quantity : 1 Lot 2. MOC : uPVC 3. Schedule 40 4. Valves and Fittings : Upvc/ brass Another additional works like Emergency power supply and illumination system, all piping, cabling etc. Up to the termination points, operation and Maintenance of the plant, Power supply to panel, earthing, Water inlet connection Complete in all respect with transportation of material. Ground Floor

MIS-CVL-FURNITURE-

50010927 Providing and fixing of Storage Cabinet / Cup board made of 18mm WPC Board,ISI Certification Cabinet will have horizontal panel should be finger joints. The door shutter will be fixed using 9 degree auto hinge. The surface of the Cabinet will be finished with gloss finish laminates including 1st quality teak wood moulding and leaping.Cabinet will have provision for door, with lock and key with ISI certification hardware. WPC board:- Greenply Endure/Century , Laminate make:- Century lam/Greenlam ,Marino Hardware fittings- Godrej. Ground Floor

50010987 Providing and fixing Work station of size in plan and height of 0.75mt as per site condition having working desk of 0.75mt height from floor level. The table top should have 19mm BWP grade ply confirming to IS standard of approved make and quality. The top surface and side should be laminated with 1mm thick laminate of glossy/matte finish premium quality of approved shade. Along with cupboard with 1 draw + 1door + CPU stand, etc. All internal surface should be finished with 0.8mm thick internal laminate of white or ivory, the cabinet hinge should be 3D soft close 4H half overlay 9 degree auto hinge(Godrej-2507),telescopic channel will be 12 inch long triple sliding(45kg)(godrej-8174), SS pull handle 100mm x 12mm(Godrej-7782), MP drawer lock(Godrej-8000) and the cost includes all materials, labour, T and P, hardware etc. complete in all respect.(NSWI) Make: BWP Ply(Century Sainik 710/ green marine gold 710), Laminate(Greenlam/ Centurylam/Marino). Ground Floor

MIS-CVL-IDEALPARKI

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor

MIS-CVL-LANDSCAPIN

50002295 Planting of Nerium Olender 3' ht. ornamental plants, well established healthy disease free in poly bag/ big container Including transportation and delivery at sites. Ground Floor

50005655 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts Unit = Sqm (CPWD 2.12,P-217)[N.S.W.I] Ground Floor

50005657 Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment) (CPWD 2.2,P-213)[N.S.W.I] Ground Floor

50005659 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm (CPWD 2.4.3,P-214)[N.S.W.I] Ground Floor

50005661 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(CPWD 2.8,P-216)[N.S.W.I] Ground Floor

50005665 Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. (CPWD 2.33,P-234) [N.S.W.I] Ground Floor

50005667 Planting of Murraya exotica 2'0'' ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2'dia and 2' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.46,p-372= Rs.15.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 154.49.[N.S.W.I] Ground Floor

50005669 Planting of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) 45cm ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2'dia and 2' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant9.40,p-381= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25 ,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor

50005671 Planting of Malpighia coccigera 2'1/2' ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2'dia and 2' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.45,p-372= Rs.50.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 189.49[N.S.W.I] Ground Floor

50005673 Planting of Tecoma grandiflora 2'1/2" ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2'dia and 2' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.13,p-383= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor

50005681 Planting of Hena 2'0' ht. well grown healthy plant species as per specified height all saplings are healthy grown well canopy,disease free etc. including transportation and delivery at sites.This cost is including hoeing soil of size 2'dia and 2' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . Plant 8.50,p-373= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49(Say Rs.180.00)[N.S.W.I] Ground Floor

50005683 Planting of Fox tail palm 7'0' ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3'dia and 3' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38 ,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00) [N.S.W.I] Ground Floor

50006323 Filling & Leveling of site by JCB.[N.S.W.I] Ground Floor

50006324 Supplying planting of fruit plants including digging the pit & required quantity of fertilizer & pesticides such as mango water apple, jack fruit,guava, custand apple,count., lichu, jamun,star fruit ,tamarind,citrus lime,sapeta etc. Two to three year olds slpping at least two to six ft height depend on species as per direction of E.I.C.[N.S.W.I] Ground Floor

50006326 Maintenance Per Month including fertilizer pesticide, man power,grass cutting, straining, Seasonal flower all etc.[N.S.W.I] Ground Floor

MIS-CVL-MAINGATE

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

MIS-CVL-PAVERROAD

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50001701 Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge. Ground Floor

50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor

MIS-CVL-R.C.CDRAIN

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

MIS-CVL-RAINWATERH

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

MIS-CVL-ROADMARKIN

50011103 Painting runway/taxi/track/apron marking with adequate nos of coats (minimum 2coats) to give uniform finish with road marking paint Based on solvent based acrylic resin has UV resistant colours of superior make (water based) i/c cleaning the surface of all dirt scales, oil, grease and other foreign material etc. and lining out complete. For new road work. Ref: DSR-16.47.1.Make(Asian paints:APCOTRAK, Berger:ROAD MARKING PAINT, Dulux :PROFESSIONAL WEATHER SHIELD ANTI-CARB)[NEW-NSWI] Ground Floor

50011105 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using Hot applied thermoplastic compound conforming to ASTM: D36 or BS 3262 (Part-I) by fully/ semi automatic Thermoplastic paint applicator machine fitted with profile shoe, Reflectorising glass beads conforming to BS:6088 and BS 3262 (Part-1) dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P,cleaning the road surface of all dirt,seals,oil,grease and foreign material etc.complete and accordance with applicable specifications Ref: DSR-16.62.[NEW-NSWI] Ground Floor

MIS-CVL-SECURITYSH

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000008 "Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. " Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor

50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor

50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor

50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor

50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor

50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor

MIS-CVL-SEPTICTANK

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000019 "25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. " Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50001806 F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.(IN FOUNDATION & PLINTH) Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

MIS-CVL-SEPTICTANK

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000019 "25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. " Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

MIS-CVL-TENSILEROO

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011592 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50011664 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM). Ground Floor

50012614 Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical f asteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete . (Make :- Tensafabstruture & Acme) Ground Floor

MIS-CVL-TENSILEROO

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011592 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50011664 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM). Ground Floor

50012614 Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical f asteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete . (Make :- Tensafabstruture & Acme) Ground Floor

MIS-CVL-TENSILEROO

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011592 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50011664 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM). Ground Floor

50012614 Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical f asteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete . (Make :- Tensafabstruture & Acme) Ground Floor

MIS-CVL-TENSILEROO

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011592 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50011664 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM). Ground Floor

50012614 Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical f asteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete . (Make :- Tensafabstruture & Acme) Ground Floor

MIS-CVL-TENSILEROO

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor

50011592 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) Ground Floor

50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor

50011664 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM). Ground Floor

50012614 Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical f asteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete . (Make :- Tensafabstruture & Acme) Ground Floor

MIS-CVL-UGR50KLWIT

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50001471 Supplying all materials, labour and T&P and providing cement concrete (1:3:6) with 40 mm size crusher broken hg metal, screened and washed sharp sand including cost, conveyance and royalty as per direction of Engineer-in-charge. Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50004586 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. [NSWI] Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

MIS-CVL-UGR50KLWIT

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50001471 Supplying all materials, labour and T&P and providing cement concrete (1:3:6) with 40 mm size crusher broken hg metal, screened and washed sharp sand including cost, conveyance and royalty as per direction of Engineer-in-charge. Ground Floor

50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor

50004586 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. [NSWI] Ground Floor

50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor

50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor

MIS-CVL-VDFFLOORIN

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

50011101 Providing and laying in position 200mm thick Tremix/VDF flooring P.C.C. M-30 grade concrete using 20mmnominal size HBG down graded chips for plain cement concrete work using cement content 400kg/cum as per approved design mix having continious agitated mixer,mis design of specified grade for reinforced cement concrete work and for VDF floorng using screed board vibrator,placing of filtermat(nylon cloth to act as very fine filter),top mat (large single PVC sheet),Vaccume process using vaccume pump about 0.08MPA which ruduces water content about 15-20% ,power trawelling,brooming,T&P Charges including power,loading,unloading and hire charges,making grooves of 6mm wide and 25mm deep @ 1.5m C/C both ways ,filling the joints with sealing compound of approved quantity"Grade-A"(Ref:DSR-SH 16.46.1) with cost of material ,labour,conveyance,royalty etc. complete basing on IS 256:2000 minimum slump is 25mm to 75mm and minimum thiockness is 125mm . Ground Floor

50011103 Painting runway/taxi/track/apron marking with adequate nos of coats (minimum 2coats) to give uniform finish with road marking paint Based on solvent based acrylic resin has UV resistant colours of superior make (water based) i/c cleaning the surface of all dirt scales, oil, grease and other foreign material etc. and lining out complete. For new road work. Ref: DSR-16.47.1.Make(Asian paints:APCOTRAK, Berger:ROAD MARKING PAINT, Dulux :PROFESSIONAL WEATHER SHIELD ANTI-CARB)[NEW-NSWI] Ground Floor

50011105 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using Hot applied thermoplastic compound conforming to ASTM: D36 or BS 3262 (Part-I) by fully/ semi automatic Thermoplastic paint applicator machine fitted with profile shoe, Reflectorising glass beads conforming to BS:6088 and BS 3262 (Part-1) dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P,cleaning the road surface of all dirt,seals,oil,grease and foreign material etc.complete and accordance with applicable specifications Ref: DSR-16.62.[NEW-NSWI] Ground Floor

MIS-CVL-WASHINGRAM

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

MIS-CVL-WATERPURIF

50008261 Supplying and fixing Aquaguard Storage Cooler–Cum-Purifier (80 Ltr. Capacity ) with all cost complete.[N.S.W.I] Ground Floor

MIS-CVL-WORKSHOP

50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000008 "Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. " Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor

50000018 "4"" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. " Ground Floor

50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor

First Floor

50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor

50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor

50000488 Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth Ground Floor

50000490 Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure. Ground Floor

50001692 Supplying, fitting,fixing and hoisting joists & M.S trusses and placing in position including cost of labour materials transportation etc.(make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)) First Floor

50005597 Providing TEXTURED POLYCARBONATE sheet with all its accessories etc complete as per the direction & instruction of the E.I.C. [N.S.W.I] First Floor

50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor

First Floor

50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor

50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor

50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor

First Floor

50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor

First Floor

50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor

First Floor

50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor

50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor

50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor

First Floor

50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor

First Floor

50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). First Floor

50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) First Floor

50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. First Floor

50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. First Floor

50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor

50011101 Providing and laying in position 200mm thick Tremix/VDF flooring P.C.C. M-30 grade concrete using 20mmnominal size HBG down graded chips for plain cement concrete work using cement content 400kg/cum as per approved design mix having continious agitated mixer,mis design of specified grade for reinforced cement concrete work and for VDF floorng using screed board vibrator,placing of filtermat(nylon cloth to act as very fine filter),top mat (large single PVC sheet),Vaccume process using vaccume pump about 0.08MPA which ruduces water content about 15-20% ,power trawelling,brooming,T&P Charges including power,loading,unloading and hire charges,making grooves of 6mm wide and 25mm deep @ 1.5m C/C both ways ,filling the joints with sealing compound of approved quantity"Grade-A"(Ref:DSR-SH 16.46.1) with cost of material ,labour,conveyance,royalty etc. complete basing on IS 256:2000 minimum slump is 25mm to 75mm and minimum thiockness is 125mm . Ground Floor

50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor

50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] First Floor

50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor

MIS-INE-ADMINBUILD

40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000952 Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000958 Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor

40000961 Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor

40000967 Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000991 Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor

40001045 Supply and laying of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001051 Supply and laying of 150 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001129 Supplying and fixing of 6"X4" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor

40001132 Supplying and fixing of 8"X6" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001135 Supplying and fixing of 8"X10" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001172 Supply of U-type fan hook(Make-TATA) Ground Floor

40001190 Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30) Ground Floor

40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor

40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001708 Wiring to Loudspeaker with 2x1.5 sqmm stranded copper conductor unarmoured cable for loud speakers clamped with PVC pipe saddles,base etc.on ceiling/wall complete including termination,testing etc as required (Make-Finolex/Anchor/Havells/V-guard) Ground Floor

40001709 Installation,testing,commissioning charges of audio system. Ground Floor

40001987 Supply and laying of 10 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Make-Cable-FINOLEX/ HAVELLS/ POLYCAB Ground Floor

40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

40002146 Supply and laying of 10 sq.mm 4 core copper flexible cable from Panel to AC out door Unit. Ground Floor

40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor

40002182 Supply and laying of 185 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor

40002791 Supply and fixing of Cable Tray 12 inch including all accessories and connections as per instruction of Electrical Engineer-in- Charge Ground Floor

40002868 Supply and fixing of 4 way , single Door MCB Box with 1 No 63 Amp. 4P Isolator with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, ) Ground Floor

40002886 Recessed wiring to bay light Point ( MODULAR) (45WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . (Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Make-switch/etc-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor

40006336 Supply & fixing of 6 Way VTPNDB IP 43-Metal Door Incoming: 1 No of 100 A Four Pole MCCB with stud connector Outgoing: 6nos 40 A TPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )[Make-(a)MCB /MCCB -Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC ) Ground Floor

40006387 Supply & fixing of 4Way VTPNDB IP 43-Metal Door Incoming: 1 No of 63 A Four Pole MCCB with stud connector Outgoing: 3 nos 32 A TPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )[Make-(a)MCB /MCCB -Legrand/L <(><<)>(>&<(><<)>)>T/ABB/SCHNIDER/ANCHOR-PANASONIC ) Ground Floor

40008124 Supply & fixing of 400mm (16") wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR) Ground Floor

40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor

40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor

40008150 Supply and fixing of 6 way mcb Box ( 8+18)(PDB) with I/C- 63 AMP 4PMCB + 63 AMP 4P RCCB (300MA) & O/G- 20 AMP SP MCB -09 NOS&16 AMP SP MCB -09NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.[Make-(a) MCB/MCCB-Legrand/L&T/ABB/SCHNIDER Ground Floor

40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor

40008385 Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX) Ground Floor

40008387 Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1) Ground Floor

40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor

40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor

40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor

40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor

40008481 Supply of wall mounted speaker make- Ahuja (ASX-312bt) including all accessories. Ground Floor

40008483 Supply of wireless speaker Microphone Make-Ahuja(AWM 700UH)including all accessories Ground Floor

40008485 Supply of Central amplifier Make-Ahuja(CMA-5400) including all accessories Ground Floor

40008487 Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessories Ground Floor

40008488 Supply of Chairman Unit ,Make-AHUJA(CMS-5100) including all accessories Ground Floor

40008489 Supply of Deligate Unit Make-Ahuja(CMD-5200) icluding all accessories. Ground Floor

40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor

40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor

40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor

40008509 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX) Ground Floor

40008511 Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL) Ground Floor

40008513 Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL) Ground Floor

40008586 Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX) Ground Floor

40008703 Supply and fixing of 60wt Ceiling mounted high bay LED luminarie with LED lamp including all accessories and connection.(Make- Crompton model-TIP-311-70-57-SL-CP-NSG /wipro/philips) Ground Floor

40009119 Providing and fixing of 30 wt. LED COB Light fitting with lamp , choke, connecting wire, and all accessories and connections as per instruction of Electrical Engineer-in-charge.(Make- CROMPTON(model no-CDR-210-30-30/40-SL-NWH)/WIPRO(MODEL NO-LD56-381-060-40-XX ( 32 WATT ) /PHILIPS(MODEL NO-30W ACCENT SPOT) Ground Floor

40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor

40011640 Supply and installation of E-Podium (For auditorium)) metalic body with top sliding mechanism ● Visualiser Tray ● Rack for Equipments ● 21.5 inches Touch Screen Monitor ● Laptop Interface with inbuilt switcher ● Gooseneck Mic, Wireless lapel Mic and handheld mic, ● 200 Watts Amplifier, ● Speaker 4 nos ● Central Control System with Button Pad Projector, Screen, Audio and Video Control ●Cabling (Make-Pepole link/Globous) Ground Floor

40011913 Supply and insstallation of 98" automatic data processing interactive unit,4K UHD interactive panel with built-in android OS,8GB+128GB configuration and recognizes upto 20 unique points of touch display with HDMI-out ,3 years warranty.(Make-People link/Viewsonic/LG) Ground Floor

40012098 UPS/ FLOOR LIGHT PANEL:Incomer:63 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 4 nos. 63 A CU Busbar duly sleeved Instruments: 1 set.LED type phase indicating lamps with control fuses Outgoing : 4 Nos 40A 4P MCB. (10 KA) , Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge..MAKE OF MCCB- [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNEIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40012316 Providing and fixing of Mobile Charging Unit(MCU) fabricated using 18mm thick plywood for the top,shelf,shutters,verticals,sides and bottom boxing.All exposed and internal surfaces shall be finished with laminate and vinyl with complete hardware such as hinges,locks,sockets,USB port ,cover plates etc.edge treatment including rounding,chamfering,grooves and molding as per required shape and size. Ground Floor

40012323 Supply and fixing of surface mounted led 24 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCTLSNE-24-FO-CDL)/WIPRO(MODEL NO-LD81-271-XXX-60-SM/PHILIPS Ground Floor

40012658 Supply and fixing of 800mp Feeder Panel with I/C- 800 Amp FPMCCB- 1 <(><<)>(>&<(><<)>)> O/G-400 Amp FPMCCB- 3,125 Amp FPMCCB- 3,200A FPMCCB-1 including all accessories and connection.[Make-(a) MCB/MCCB- Legrand/L<(><<)>(>&<(><<)>)>T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40012695 Supply and fixing of 8 way , Double Door MCB Box with 1 No 16 Amp. DP MCB & 6 Nos of 6 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor

40012762 Supply and Installation, Testing & commissioning of NUMERIC - Legrand Make 40KVA/40KW ( 3PH-3PH) ONLINE DOUBLE CONVERSION UPS having 3ph. 415 V AC, 50Hz Input & 415V 50HZ 3phOutput, Input Voltage range 320V AC to 460V AC, WITH INBUILT GALVANIC ISOLATION Transformer, inbuilt phase reversal correction, with protection <(><<)> 1KV, response time <(><<)> .5 nano sec, all 10 mode protection( L-L/ L-G/L-N/N-G) , With Wide Range DC BUS facility, with Certification of IEC62040-1,2,3 Certification with CE & RoHS Compliance . With Two years warranty. with MS rack for battery housing, with DC cable, with SFU/Breaker, inter links and delivery with installation charges. ,40 nos 12V 100AH AH SMF batteries with 30mins backup (Make-UPS-Numeric Model-HPi33EVO /APC Make-Battery-Exide/Quanta) Ground Floor

40012782 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top <(><<)>(>&<(> <<)>)> bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L <(><<)>(>&<(><<)>)>T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming-200 A FP MCCB, Thermal Magnetic Release,25KA,DN1-250C 250A Cu Busbar,Instrument-Multifunctional Meter,Indicator etc-1 set Out going- 10 Nos 63A FPMCB ,01 No Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 01 Nos : LED type R-Y-B phase indicating lamps with control fuses Ground Floor

40012885 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a)Make-(a)MCB/MCB BOX - Legrand/ Schnider/Havells Crabtree/ ABB, ( b)Volt meter, Ammeter-AE/IMP, (d) all other acessories ISI mark] Incoming- 1 No 32 A Four Pole MCCB Busbar : 4 Nos Electrolytic copper strips Outgoing - 6 Nos 16A DPMCB Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses & toggle switches.03 Nos : LED type phase indicating lamps with control fuses & toggle switches Ground Floor

40012999 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top <(><<)>(><(><<)><(> <<)>)>(><(><<)>(>&<(><<)>)><(><<)>(> <(><<)><(><<)>)>)> bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L <(><<)>(><(><<)><(><<)>)>(><(><<)>(>&<(><<)>)><(><<)>(><(><<)><(> <<)>)>)>T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming-630A 4P Onload changeover switch 630A 4PMCCB(50KA)-1 No thermal with spreder & ROM 1000A Cu Busbar,Instrument-Multifunctional Meter,Indicator etc-1 set Out going- 4 Nos 200 A 4PMCCB(36KA),thermal with spreder & ROM 6 Nos 100 A 4PMCCB(36KA),thermal with spreder & ROM 8 Nos 63 A 4PMCCB 01 No Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 01 Nos : LED type R-Y-B phase indicating lamps with control fuses with SPD -10KA type 1+2 MCB,panel duly fabricated & wired with bus bar. Ground Floor

MIS-INE-AREAILLUMI

40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor

40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001883 Recessed wiring to Gate light Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge .( Make of wire Finolex /Anchor / Havells/V guard) Make-switch /Angle holder-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor

40002194 Supply and fixing of 4mtr long Single arm ornamental pole Model-JGM-BLK-POLFLX400MTR Make(Jaquar/Wipro/Philips) Ground Floor

40002198 Construction of light post base with inside opening of following size complete including excavation of pit,PPC Padding,250 mm thick brick walls on all sides,1:6 cement plastering of the wall side,top & complete as required as per electrical engg -in -charge and consultation 300mm x 300mm x 750mm Ground Floor

40002201 Supply & fixing of 200x150mmx60mm(nominal) size pvc(SINTEX) looping end box with hinged cover having one no.20 amp rating moulded fuse base &holder, 4amp NS type fuse and 4way connector to be used in the bottom of street light pole for cable termination as per electrical engg -in -charge and consoltant and complite as per electrical engg -in -charge and consultation Ground Floor

40002239 Supply and laying of 2.5Sqmm 3 Core Cupper Cable 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick (Make of wire Finolex/L &T/Anchor/Havels/V Guard) Ground Floor

40002349 Supply & errection of 8.0 Mtr galvanized Octagonal pole ,continuosly tapered,single piece,3mm thick,The face to face dimension is 130mm at bottom and 70mm at top dia.base plate.size is 200 x 200 x16 mm thick The pole should be manufactured from special steel plate suitable for lighting Arrangement System ,Galvanized Founation bolt specification of bolt length 600mm circle dia 200mm bolt size 20mm,Template size is 200mm PCD,thickness 3mm with 10/4 Bakelite Cover,63 Amp 4 way Stud Connector-01No,10 Amp SPMCB-01 No,MCB Channel-01 No,Mudguard Nut,Bolt & washer-06 Nos,Aluminium Socket-08 Nos.(make-Bajaj/RR-ISPAT/Vankal/Utkarsh) Ground Floor

40002353 Supply and fixing of 1mtr. Long Galvanized deocartive single arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor

40002355 Supply and fixing of 1mtr. Long Galvanized deocartive double arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor

40002497 Supply of outdoor type auxillary panel board made out from 20guage thick CR Sheet duly painted with clamping arrangement to be fixed on street light pole equipped with 04 nos bus bar 03 nos indication lamp with 1 No toggle switch ,1 no timer switch , 1 No Stud type 4 way terminal I/P) 63 Amp ) 1 No 63A TPN MCB, 1 No 3 Pole Contractor 65 A, 1 No Single Pole MCB 10A, 3 Nos 16 amp TPN MCB , 3 Nos Stud type , 4 way terminal (O/P) 63A A with earthing arrangement [Make-(a)MCB /MCCB - Legrand/ Schnider/L &T/ ABB, ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark] Ground Floor

40003041 Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing stids/ bolt of the pole complete including all accesories and connections. Ground Floor

40003258 Supply and laying of 3 Core 1.5 sq.mm. insulated conductor with all accessories and connections.(Make of wire Finolex / L &T /Anchor / Havels/ V guard) Ground Floor

40005870 Supply and laying of 25 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40009686 Supply & Fixing of 2 core 6 sqmm Cable end termination Ground Floor

40010339 Supply, delivery, errection, testing & commissioning of 20 Meter , 20 sided polygonal hot dip galvanized high mast suitable for wind velocity of 250 KM/HR wind speed or more. The high mast must be supplied in two sections .The top dia and bottom dia of high mast should be 150 mm and 610 mm respectively . The thickness of top and bottom section should be 5 mm and 6 mm respectively . It shall include all accessories like head frame, Two points suspension system with steel wire rope of 6 mm dia, double drum winch ,galvanized lantern carriage with 8 nos. 300 wt LED flood light fitting having die cast aluminium controlgear box complete with ignitor & capacitor. The high mast to be supplied along with LED aviation obstruction light complete with all accessories, lightening final, integral power tool ,1.5 HP motor, EPR trailing cable installed inside the base compartment. 12 nos. 1200mm length foundation bolts for foundation. .outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP conta ctor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. The scope of work also includes to construct RCC foundation , Erection of high mast, installation of feeder pillar, 2 nos. earthing with 2.5 mtr long 40 mm dia GI earth electrode. . The high mast to be supplied along with double drum winch . Wind tunnel report of high mast shaft should confirm the force coefficient and the mast must be suitable for 250 Km/HR wind speed or more. The entire high mast lighting system should be warrantied for a period of 2 years from the date of handing over . (Make- of Luminaries- Crompton Greaves/ Philips / Wipro/havells/panasonic))(Make of mast-RR ispat/Bajaj/Utkarsh/Vankal) Ground Floor

40011619 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- PANASONIC(MODEL NO-PSTM22908)/HAVELLS(MODEL NO-ENDURA SUNDOWN90W)/CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX Ground Floor

40012278 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor

40012940 Supplying & installation, testing and commissioning of bollard light 1 to 3 feet height having 9/10watt LED luminare (Havell TURIN BOLLARD /Jaguar make Type No-LBLD03R108XW) /PANSONIC(MODEL-PBDM03108/CRO MPTON(MODEL-LBLSR-10CDL)/WIPRO(MODEL-LB14-131-XXX-65-08/PHILIPS)(MODEL-58176 PHILIPS Glide Pedestal Black E27(BULB EXTRA) Ground Floor

40012942 Supplying & installation, testing and commissioning of post top lantern of 40 watt LED luminare with all accessories and including connection etc. ( Gate light )(Make-CROMPTON(MODEL NO-LPTO-40-CDL-M (40 WATT)/PHILIPS/WIPRO MODEL NO-LP07-501-XXX-57-C L/PANASONIC(MODEL-PPTM02408)/HAVELLS(MODEL-RUBY 40W) Ground Floor

MIS-INE-CCTVSYSTEM

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

40003013 Supply Wireless Mouse (Make- Logitech) Ground Floor

40003492 Supply,Installation of 3 core 2.5 sqmm cable in rigid PVC pipes per runing meter (Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor

40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor

40009165 Supply and installation of 5KVA online UPS system 192VDC with single phase AC input and single phase AC output for 60 Min back up,MS rack for housing the batteries & link cable ,16 nos 12V 42AH SMF batteries(Make-UPS-Numeric (Model-ONFINITI FM)/APC,Make-Batt ery-Exide/Quanta) Ground Floor

40009741 4 Port Giga Ethernet Unmanaged PoE Switch with surge protection Make- Netgear/Aruba/Juniper Ground Floor

40009917 Supply , Installation of Hot Dip Galvanized hexagonal Poles of 15 feet height with necessary accessories for camera mounting and complete errection.(make-Bajaj/RR-ISPAT) Ground Floor

40010311 Supply , Installation, testing , commissioning of 64Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 8 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ Prama Ground Floor

40010313 4MP WDR 32x IR Network PTZ Camera: 1/2.8" 4MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ Prama Ground Floor

40010317 Supply , Installation, testing , commissioning of 24-Port Gigabit Ethernet POE Smart Switch. Make: Netgear/Juniper/Aruba Ground Floor

40010321 Supply , Installation, testing , commissioning of SM OFC 2M Patchcord .Make-Dlink/Molex/Digisol Ground Floor

40010323 Supply , Installation, Testing of FIBER DRAWER LIU,LOADED,6 SM,LC DX ADAPTER. Dlink/Molex/Tyco Ground Floor

40010331 Supply , Installation of PVC IP55 Junction Box Ground Floor

40010337 Supply , Installation of 24*7 Surveillance sign board (18*12, Sun Vinyl Board) Ground Floor

40010407 Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WD Ground Floor

40010410 Supply , laying of Solid Cat 6 Outdoor Armed (ECCS Tape) Cable Make- D-link/Digisol Ground Floor

40010412 Supply , Installation, testing , commissioning of 1KVA Online UPS with Battery Make-Numeric/APC/Microtek Ground Floor

40011110 Supply, Laying or pulling or blowing of SM(OS2) UNITUBE, ARMOURED, 6 CORE OFC cables into underground min 3 feet with HDPE conduit with Splicing and all other accesseries. Make-Molex/Digisol Ground Floor

40011679 Providing & fixing Smart LED TV ( Sony Bravia 4K - 65 '' ) Model No KD-65X 82L inclusive of all necessary hardwares, T&P etc. complete including all accessories and connections.(Make-Sony/LG/SAMSUNG) Ground Floor

40012068 SUPPLY OF 17U STANDING RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NFR-17U-6060-BL-SK)/MOLEX/DIGISOL) Ground Floor

40012236 Outdoor IP-66 Box for UPS . Ground Floor

40012272 Supply , Installation, testing , commissioning of SFP Fiber Module for Switch. Make-Netgear/HP Ground Floor

40012278 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor

40012282 Supply , Installation of OFC Cable Signage (10Meter Gap) Ground Floor

40012284 Supply , Installation of RJ45 Connector Make-D-link/Digisol/Molex Ground Floor

40012473 Supply of 15 Meter High Speed HDMI Cable Approved Make: MX/ Liberty/ Kramer/ Extron Ground Floor

40012786 Supply , Installation, testing , commissioning of 4MP Full HD WDR IR Network Bullet Camera featuring a 1/3" or 1/2.9" CMOS sensor, motorized 2.7-13.5mm lens for 4MP video at 25/30fps, H.265+/H.264+ compression, 120dB WDR, Min-50m IR range, IP67/IK10, Micro SD, PoE. Make - CP Plus (CP-UNC-TC41ZL6C-VMD-LQ)/ Prama (PT-NC346P1-WNRAM-D2) Ground Floor

40012788 Supply , Installation, testing , commissioning of 4MP Full HD WDR IR Network Dome Camera featuring a 1/3" or 1/2.9" CMOS sensor, motorized 2.7-13.5mm lens for 4MP video at 25/30fps, H.265+/H.264+ compression, 120dB WDR, 30m IR range, IP67/IK10, Micro SD, PoE. Make - CP Plus (CP-UNC-VC41ZL5C-VMD-Q)/ Prama (PT-NC347P1-WNRAM-D2) Ground Floor

40012879 Supply , Installation, testing , commissioning of 24-Port Gigabit Ethernet Smart Switch with 2 SFP Ports (380W) Make: Netgear/Jun iper/Aruba Ground Floor

40012887 Supply , Installation, testing , commissioning of 8-Port Gigabit Ethernet PoE Smart Switch 2 Dedicated SFP Ports . Make-Netgear/Juniper/Aruba Ground Floor

MIS-INE-DGSET

40002143 Supply and laying of 240 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. Make-Cable-Finolex/Polycab/Havells/KEI (Sl. No-25 sl no- 5.1.2) Ground Floor

40012707 Design, supply, erection, testing and commissioning of 200KVA silent type DG set with AMF, 415V three phase 1500 RPM ,50HZ ,6 Cylinder with 4 nos earthing, 800 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth & Shed as per specification as required and as per direction of engineer-in-charge. Make- MAHINDRA POWEROL MODEL(H6725G4)/JAKSON(MODEL-CI200D5P) Ground Floor

MIS-INE-DGSETFORSH

40010602 Design, supply, erection, testing and commissioning of 82.5KVA silent type DG set with AMF, 415 V three phase 1500 RPM ,50HZ ,6 Cylinder with 4 nos chemical earthing,50 mtrs-power cable and control cable-15 mtrs for AMF ,50ltrs diesel ,125 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth with foundation & Shed as per specification as required . Make- Mahindra Powerol(model no-V4355G3 Ltd/Jakson(Cumins) model no-CI82.5D5P,ENGINE MODEL-QSB4.5-G1. Ground Floor

MIS-INE-DRIVERREST

40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001129 Supplying and fixing of 6"X4" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor

40001132 Supplying and fixing of 8"X6" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001135 Supplying and fixing of 8"X10" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001160 Supply and fixing of 63AMP DPMCB-1NO ,63 AMP .240V CUTOUT-2NOS METER SPACE WITH LOCKING ARRANGEMENT,METER CUT OUT,COPPER BUS BAR & INDICATOR including all accessories and connections. [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40001172 Supply of U-type fan hook(Make-TATA) Ground Floor

40001187 Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor

40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor

40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor

40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor

40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor

40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor

40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor

40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor

40012278 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor

MIS-INE-ELEVATOR

40000955 Recessed wiring to Bulk Head Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001015 Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001166 Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001595 Supply and fixing of Bulk Head fitting with 9 wt. LED Bulb including all accessories and connections as per instruction of Electrical Engineer-in-charge. (Make- CROMPTON/ PHILIPS/ WIPRO/HAVELLS/PANASONIC) Ground Floor

40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40008606 Supply, Erection, Testing &Commissioning of 13 Passenger, (Ground + 2) floor Machine Room Elevator with ACV3F drive/control for constant load of 884 Kg.,Three stops , Automatic Rescue Device, Speed (01Meter per second), push button operation (Nudging), cross flow fan for ventilation, Auto fan cut off, heavy duty vinyl tile flooring, auto central door opening/closing ( All opening on same side), car position indicators, LED scrolling display, LED ceiling lights, auto voice synthesizer, overload alarming device, infrared door closing protection, door time protection, sensor based door movement, emergency alarming system, emergency light, braille push buttons, intercom, stainless steel mirror finished (lift car, lift door & hand rail), Fire rated door with 60 Mins. fire rating, Fireman's switch, Cladding at each stop(both side & top of each entrance with ply & lamination). The Elevator should be suitable for physically challenged persons.The scope of work is Supply, Erection, Testing & Commissioning of Elevator along with all related civil and electrification work. Make of the Elevator :- OTIS/MITSUBISHI/SCHINDLER Ground Floor

MIS-INE-EVCHARGER

40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001045 Supply and laying of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001048 Supply and laying of 120 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

40002152 Supply and fixing of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade end termination Ground Floor

40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor

40002745 Supply and laying of 50 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked(Brass compression) Ground Floor

40002747 Supply and laying of 120 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked Ground Floor

40003105 Supply of all materials & fixing / laying of 25 x 5 mm G.I flat for earth connection as reqd & as per site engineers instruction & technical specification. Ground Floor

40003522 Supply and installation of HDPE pipe inspection chambers with die cast lid Ground Floor

40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor

40010415 Design,Supply ,erection,testing and commissioning of 10 KW- 3 x 3.3 KW AC E-Rickshaw charger having following specification Input Voltage 415 VAC, 3 ph 5wire(L1, L2, L3, N & PE) Input Frequency 50 Hz Number of Outputs- 3 Output 1 Rating- Each outlet 230VAC, Max 15A (MAKE- Anchor Panasonic/Siemens) Ground Floor

40010450 Design,Supply ,erection,testing and commissioning of 30 KW- SG wall box(fast charger) AC E-Rickshaw charger having following specification Input Voltage 415 VAC, 3 ph 5wire(L1, L2, L3, N & PE)Input Frequency 50 Hz Number of Outputs- 3 Output 1 Rating- Each outlet 230VAC, Max 15A (MAKE- Anchor Panasonic/Siemens) Ground Floor

40010612 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top <(><<)>(>&<(> <<)>)> bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L <(><<)>(>&<(><<)>)>T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 400 Amp FP MCCB [50 kA] Busbar : 4 Nos 600A, 500V Electrolytic copper strips SPD-100KA,TYPE-1+2 with MCB,2A SPMCB C-Curve Outgoing - 6 nos 125Amp 4PMCCB[50 kA] Busbar : 4 Nos 500A, 500V Electrolytic copper strips Panel Duly fabricated & wired with Busbar,spreder and rotary handle Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses <(><<)>(> &<(><<)>)> Ground Floor

40012194 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 8 nos 63Amp 4PMCCB ,Instrument-Multifunction meter,Indicator-1. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses Ground Floor

MIS-INE-FASTAIDKIT

40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor

MIS-INE-FIREFIGHTI

40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40007914 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following.Horizontal type, end suction , back pul-out pump of cast iron body & bronze impeller with stainless steel shaft,2280lpm 70 meter head, mechanical seal. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required Suitable cement concrete foundation duly plastered..complete in all respects, as required .Make:Wilo / Kiloskar Or Lubi. Ground Floor

40007916 Supplying, installation, testing and commissioning of Diesel Engine Driven Fire Pump, Fixing single/double stage horizontal centrifugal pumping set of the following specifications including vibration elimination pads and six cylinder , radiator cooled engine with pressure reducing valve complete Suitable HP,2280lpm & 70meter head, 1800 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank with 8hour operation capacity, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. Make:Wilo / Kiloskar Or Lubi. Ground Floor

40007922 Providing and Fixing Jockey pump of 180lpm, 70meter head, fixing single/double stage horizontal centrifugal pumping set with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per the details given below.Make:Wilo / Kiloskar Or Lubi. Ground Floor

40007924 Providing , fixing of terrace boster pump of 450 lpm volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per the details given below.Make:Wilo / Kiloskar Or Lubi. Ground Floor

40007930 Supply, Installation, Testing and Commissioning 250mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth) Ground Floor

40007932 Supply, Installation, Testing and Commissioning 200mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti) Ground Floor

40007934 Supply, Installation, Testing and Commissioning 150mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth) Ground Floor

40007936 Supply, Installation, Testing and Commissioning 100mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti) Ground Floor

40007938 Supply, Installation, Testing and Commissioning 80mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti) Ground Floor

40007940 Providing and fixing of Non return valve 200mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR. Ground Floor

40007942 Providing and fixing of Non return valve 150mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR. Ground Floor

40007944 Providing and fixing of Non return valve 100mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR. Ground Floor

40007950 Providing and fixing of 150mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick ins ertion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTAR Ground Floor

40007952 Providing and fixing of 100mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick ins ertion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTAR Ground Floor

40007954 Providing and fixing of 80mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick inse rtion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTAR Ground Floor

40007958 Supply, installation, testing and commissioning 150mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers etc., complete.SANT / ZOLOTO / KARTAR Ground Floor

40007960 Supply, installation, testing and commissioning 100mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers etc., complete.SANT / ZOLOTO / KARTAR Ground Floor

40007964 Providing and fixing dial type pressure gauge with isolation cock and chrome plated copper pipe at hydrant station.Make - H-Guru.Dial diameter 100 mm calibration 0-15 kg/sp.cm Ground Floor

40007966 Supplying and Installation, Testing & Commissioning double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 12mm M.S. plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality and sufficient provision of pressure switches, Pr. Relief Valve, tripod type stand, pressure gauge with ball valve, drain ball valve of 50mm dia with piping complete as required and all other required accessories to operate commonly main fire pump, diesel fire pump and Jockey pump at drop of pressure, automatically at required pressure setting. Recommended dia. : 250 mm,Height of shell : 1000 mm,Working pressure : 19 Kg/cm2,Test Pressure : 28.5 Kg/cm2 Ground Floor

40007968 Providing and fixing electrically operated dual type pressure switches with threaded connection for a pressure vessel, complete suitable for 0-15 Kg/Sq.cm model IPS-200 .Make - Dandfos. Ground Floor

40007970 Providing and fixing of 15mm brass ball valve with lever and screwed female ends.(20 kg/cm2)at all level and position .Zoloto/Kartar. Ground Floor

40007972 Providing and fixing of 25mm brass ball valve with lever and screwed female ends.(20 kg/cm2)at all level and position .Zoloto/Kartar. Ground Floor

40007974 Supplying and fixing approved make 25 mm dia automatic air release valve suitable for 20kg/sqcm working pressure with necessary fittings complete in all respect at all level and position .Zoloto/Kartar. Ground Floor

40007978 Providing & fixing four way fire brigade inlet Gunmetal collecting head with 63 mm dia instantaneous type inlet and 150 mm dia flanged outlet fire brigade connection to fire risers (I.S. 904-1965) complete with campanion flange as per table "E" nuts, bolts, gasket included cutting & welding at all level and position ..Fire shield / KARTAR Ground Floor

40007980 Providing & fixing Two way fire brigade inlet Gunmetal collecting head with 63 mm dia instantaneous type inlet and 150 mm dia flanged outlet fire brigade connection to fire risers (I.S. 904-1965) complete with campanion flange as per table "E" nuts, bolts, gasket included cutting & welding at all level and position ..Fire shield / KARTAR Ground Floor

40007984 Supplying,Fixing ,testing and commissioning of compartmentalized common control panel for one diesel,one electic & one jockey pump with mechanical and electrical interlock facility for the fire pumps. All the components shall be housed in a common cubical made of 16 SWG. M.S. sheet with required stiffeners). The panel shall be powder coated of approved color both inside & outside. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height.Make -ASES/LUBI/GREEN POWER . Ground Floor

40007986 Supply , Installation , testing and commissioning of control panel of 450lpm fire pump .Make -ASES/LUBI/GREEN POWER . Ground Floor

40007998 Supply and laying of 3C X 6sqmm sqm copper cable Power cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays).(Finolex/Havells/Polycab) Ground Floor

40008008 Providing and fixing SS landing valve conforming to IS -52290 with 63 mm dia. instantaneous female coupling on the outlet with PVC cap with chain, necessary companion flanges ( as per table "E") nuts, bolts, washer and gasket complete as per specification. (ISI marked) .SAFE GUARD / KARTAR / Ground Floor

40008010 Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted with 20mm dia. B129 30m long high pressure rubber hose type -II to IS. 5132 or nylone braieded polypropelene hose of approve make with 5 mm outlet S.S. nozzle with shut off valve (IS. 884-1969).(Make-SAFE GUARD / KARTAR / SWASTIK) Ground Floor

40008012 Providing and fixing SS coupling 63 mm dia. 15m long rubberized EPDM lined hose including SS male and female instantaneous type coupling approved by fire authority.(Make-SAFE GUARD / KARTAR / SWASTIK) Ground Floor

40008014 Providing and fixing standard short size SS branch pipe with SS nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked) .(Make-SAFE GUARD / KARTAR / SWASTIK) Ground Floor

40008018 Providing and fixing M.S. structural work fabricated from standard sections e.g. M.S. Rounds, angles, channels, GI clamps including cutting to size drilling, welding including insert plates or "Hilti/ Wurth fastners of required specification in RCC structural/masonry. Ground Floor

40008020 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with locking arrangement and hanging arrangement for accessories painted "Fire Red" with enameled paint "Fire Hose" written on front including suitable supports to place 900 mm above ground level properly anchored, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe with nozzle for external hydrants)(Make-Kartar/Newage) Ground Floor

40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor

40008026 Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .) Ground Floor

40008030 Providing and fixing of mechanical foam type 9ltr fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex ) Ground Floor

40008033 Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .) Ground Floor

40008041 Supply ,Installation,testing & Commissioning of 2LOOP FIRE ALARM PANEL 32bit microprocessor based intelligent addressable Fire Alarm control Panel LPCB Approved with battery backup.The panel would be modular,decentralized,with minimum 240 character LCD display & for networking.Each loop would be capable to have atleast 99 addressable detectors & devices with 30mins battery backup & battery charger Inbuilt. Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST . Ground Floor

40008045 Supply, Installation,testing & Commissioning of loop card can be used for one loop i.e. minimum 254 nos of devices. Ground Floor

40008049 Supply ,Installation,testing & Commissioning of Manual Call Point. Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST . Ground Floor

40008051 Supply ,Installation,testing & Commissioning of flash cum sounder(Hooter).Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST . Ground Floor

40008063 Supply ,Installation,testing & Commissioning of convensational Smoke /Heat Detector . Make - Agni /ASES Or GST Ground Floor

40008073 Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow) Ground Floor

40008091 Supply, installation, testing and commissioning of speaker cable Single pair, 2-core, 1.5 sqmm with required conduit,bend,t etc.Make - Finolex Or Polycab. Ground Floor

40008099 Supply, Installation, Testing and Commissioning 25mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth) Ground Floor

40008716 Providing ,fixing , testing and commissioning of 2C X 1.5 sqmm copper armoured FR cable with PVC rigid counduit, shaddles, grips, screws etc complete.Make - Polycab Ground Floor

40011765 SITC of Rubber Expanssion Joint 150mm nominal dia as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.ISI (Kartar/Sant) Ground Floor

40011767 SITC of Rubber Expanssion Joint 80mm nominal dia as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.ISI (Kartar/Sant) Ground Floor

40011771 Supply and fixing of SITC of 4 mm wrapping coating with all accessories. Ground Floor

40012068 SUPPLY OF 17U STANDING RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NFR-17U-6060-BL-SK)/MOLEX/DIGISOL) Ground Floor

40012343 Providing and fixing of Non return valve 250mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR. Ground Floor

40012345 Supplying, Installing, testing and commissioning Gate Valve of size 100MM dia with all accessories. (Kartar/Sant) Ground Floor

40012892 Supply,Installation,Testing & commissioing of fault isolator module Ground Floor

40012920 Supplying, installing, testing and commissioning of 8 Watt Celling speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.(Make-Honeywell/Ahuja) Ground Floor

40012922 Supplying, installing, testing and commissioning solid state Amplifier of 700 W RMS out put in rack, including necessary control wires, jocks etc. complete.(Make-Honeywell/Ahuja) Ground Floor

40012930 Supplying, installing, testing and commissioning of P.A. Call station of 8 zones with priority module micro processor based & goose neck micro phone etc shall be located in the reception / security for the announcement necessary communication cable/CAT 6 shall be considered from PA controller to call station .(Make-Honeywell/Ahuja) Ground Floor

40012971 Supply, Installation of response indicator RE/RI dual LED RE-RI (Make-Ravel/Agni/Honeywell) Ground Floor

MIS-INE-IPPBX

40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor

40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor

40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor

40010005 Supply and Installation of Cat6 I/O Single with Face plate:Tool-less type (Make-D-link/Molex) Ground Floor

40010007 Supply and installation of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking.(Make-D-link/Molex/Digisol) Ground Floor

40010317 Supply , Installation, testing , commissioning of 24-Port Gigabit Ethernet POE Smart Switch. Make: Netgear/Juniper/Aruba Ground Floor

40012068 SUPPLY OF 17U STANDING RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NFR-17U-6060-BL-SK)/MOLEX/DIGISOL) Ground Floor

40012819 Supply, Installation, Testing & Commissioning of Enterprise-grade IP PBX Embedded IP PBX support up to 500 users, 75 concurrent calls, built-in IVR, voicemail, call recording, zero license cost along with minimum 4-port FXO Gateway for each port allows connection of a separate PSTN line into the IP PBX. Make-Grand Stream/ Matrix Comsec / Asttecs Ground Floor

40012821 Supply, Installation, Testing & Commissioning of 10-line support, 4.3" color display, HD audio, dual Gigabit ports, PoE, Bluetooth Make-Grand Stream/ Matrix Comsec / Asttecs Ground Floor

40012823 Supply, Installation, Testing & Commissioning of 2-line support, HD audio, PoE enabled, dual Ethernet ports, backlit display Make-Grand Stream/ Matrix Comsec / Asttecs Ground Floor

MIS-INE-LIGHTNINGP

40002089 Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge. Ground Floor

40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

40002098 Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge Ground Floor

40002101 Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

40002720 Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS) Ground Floor

40002739 Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-60)type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 79-107Mtr Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor

MIS-INE-MAINTENANC

40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001166 Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40012772 Supply & fixing of 63 AMP 4P,415V Industrial socket including all accessories and connections . [Make- Legrand/L&T/ABB/SCHNIDER. Ground Floor

40012774 Supply & fixing of 32 AMP 4P,415V Industrial socket including all accessories and connections . [Make- Legrand/L&T/ABB/SCHNIDER. Ground Floor

MIS-INE-ONGRIDSOLA

40003442 Supply,Installation,Testing & Commissioing of Net Meter in Consultation with Distribution utility. Ground Floor

40012535 Design,Supply,Installation,Testing & Commissioing of Grid Connected Roof top solar PV System(Through net metering)(Make-Solar PV Panel(VIKRAM/WARREE/TATA POWER SOLAR SYSTEM/PANASONIC SOLAR) ,Solar-P.C.U-LUMINOUS/STATCON/MICROTEK/SU-KAM POWER SYSTEM,Solar Battery-EXIDE/OKAYA/LUMNOUS,DC and AC distribution-MCB-Legrand/L &T,HRC fuse-L&T/ABB,Copper cable-Finolex/Havells/Polycab) Ground Floor

MIS-INE-PASYSTEM

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40003258 Supply and laying of 3 Core 1.5 sq.mm. insulated conductor with all accessories and connections.(Make of wire Finolex / L &T /Anchor / Havels/ V guard) Ground Floor

40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor

40010439 Supply of ahuja Two Way Counter Communication System (Make-ahuja (CCS-2300 ) Ground Floor

40012792 Supply , Installation, testing , commissioning of 20 W Network Cabinet Speaker for indoor. Make- Hikvision/Bosch Ground Floor

40012794 Supply , Installation, testing , commissioning of 25 W Network Horn Speaker for Out door. Make- Hikvision/Bosch Ground Floor

40012796 Supply , Installation, testing , commissioning of Microphone to integrate with PC. Ground Floor

40012798 Supply , Installation, testing , commissioning of 8 Port Gigabit Ethernet Desktop Switch Ground Floor

40012800 Supply , Installation, testing , commissioning of Software for IP Speaker Unit Expansion package-including all functions of IP Speaker Unit module and 1 Speaker Unit manageable. Supported: live broadcast and recording, playing audio files, scheduled broadcast tasks, linkage for alarms,etc. Make- Hikvision/Bosch Ground Floor

40012802 Supply , Installation, testing , commissioning of PC Server (Intel® Xeon®, 32 Gb Ram, GbE Network Interface Card, SATA-II 7200 RPM Enterprise Class HDD with 512 GB HDD. Make- HP/Dell Ground Floor

40012804 Supply , Installation, testing , commissioning of Client PC (Intel® Core i7, 16Gb RAM, NVIDIA® GeForce GTX 2080 Graphics, GbE Network Interface Card. Make- HP/Dell Ground Floor

MIS-INE-SECURITYRO

40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000955 Recessed wiring to Bulk Head Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001006 Recessed wiring to submain in 2 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.4)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001129 Supplying and fixing of 6"X4" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor

40001132 Supplying and fixing of 8"X6" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001135 Supplying and fixing of 8"X10" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001157 Supply and Fixing of 32 amp. DPMCB – 01 no wth 32 amp. 240 volt cutout – 02 nos with copper bus bar & indicator etc.including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNEIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

40001172 Supply of U-type fan hook(Make-TATA) Ground Floor

40001187 Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor

40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor

40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor

40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor

40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor

40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor

40008427 Supply and fixing of Bulk Head fitting with 9 wt. LED Bulb including all accessories and connections . (Make- CROMPTON(MODEL NO-LBHP-10-CDL / PHILIPS(MODEL NO-WT202 LED10S 10W 1000LM LED LIGHT BULK HEAD/ WIPRO) Ground Floor

MIS-INE-SHOP&RENTA

40000967 Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor

40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor

40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor

40001051 Supply and laying of 150 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor

40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor

40001129 Supplying and fixing of 6"X4" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor

40001132 Supplying and fixing of 8"X6" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001135 Supplying and fixing of 8"X10" 16/18 swg,2 " deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor

40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40001172 Supply of U-type fan hook(Make-TATA) Ground Floor

40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor

40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor

40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor

40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor

40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor

40008385 Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX) Ground Floor

40008387 Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1) Ground Floor

40012677 Supply and fixing of 12 way , Double Door MCB Box with 1 No 63 Amp. DP MCB & 5 Nos of 10 Amp. SPMCB , 5 Nos of 16 Amp. SPMCBwith sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC) Ground Floor

40012995 Supply and fixing of Main Panel board -I/C.-200 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63A DPMCB-24 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing including meter space [Make-(a)MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter ,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor

MIS-INE-VIDEOWALL

40010417 LED Display Board 12'6" LX6'3" H/10'LX6'3"H/8'0"LX6'3"HP outdoor 6 pixel density 160000 dots/sqm module resolution128x64 dots frame frequency 60Hz single LED unit pixel ,brightness 800-1000cd/sqm,gray scale up to 16bit /2.81 billion,optimum viewing angle 140x120,input voltage 220V AC ,operating tempreature 200C to 500C,Cabinet size 960mmx960mm die cast,english/odia/any language for text,video,image,outdoor active LED video fixed on unipole structure with ACB box with supply and installation.Thickness of the screen>120mm wall(BIS certified module)LED:NATION STAR SMP. Ground Floor

40010419 Novastar TB 40 processor with 4G module(BIS certified module),Novastar IND 528 receiving card,cloud based software inbuilt,LAN/Cloud data entry system having multiscreen playback synchronization mechanism (Make-Novastar TB 40) Ground Floor

40010421 Fixing of frame unipole structure 12'6"x6'3" with ACP box for supporting LED sign board 40x40x3 mmsq SS 304 grade pipe and top plate for pole 580x500x12 mm with base plate 450x450x20mm and single pole size 275mm diax5x3000mm working platfrom made by 25x25x3 mm SS-304 grade square pipe panel size 960x960mm of ACP work( JINDAL/NIPPON STEEL of premium quality. Ground Floor

40010428 LED Display Board 12.2' length X 4.2'height.,10.6' length X 4.2'height. Indoor P 2.5 pixel, density 160000 dots/sqm, module resolution 128x64 dots, module dimension 320 x160x15 mm frame frequency 60hz, single LED unit pixel, brightness 800-1000cd/sqm, gray scale up to 16bit/2.81 billion, optimum viewing angle 140x120, input voltage 220V AC, operating temperature 20°C to 50°C, cabinate size 320mmX160mm magnetic module, english/odiya/ any language for text, video, image, Indoor Active LED Video fixed on wall mounting with steel structure supply and installation Thickness of the screen>60mm Wall. (BIS certified module) LED: NATION STAR SMP. Ground Floor

40010430 Novastar TB1 processor with 4G module (BIS certified module), Novastar IND 528 Receiving card, cloud based software inbuilt, LAN/ Cloud data entry system having multiscreen playback synchronization mechanism. Make:Novastar TB1 Ground Floor

40010432 LED Display Board 4' length X 1 height. Outdoor P 10 pixel,colour red, package SMD 3535,Pixel Pitch 10mm, Pixel configuration SMD3535 Black, Density 10 ,000 pixels/m (real pixel), Module Resolution 32pixel(L) * 16pixel(H), Module Dimension 320mm(L) • 160mm(H) *25mm(D),Driving Mode Constant current, 1/4 duty Module Mask Pure black mask--high contrast screen, Brightness 26,000 cd/m, Viewing Angle 120° (Horizontal); 120°(Vertical, Best Viewing Distance 210m Gray Grade 16,384 levels for each color, Display Color 4.39 Trillion Colors Brightness Adjustment 100 grades by software or automatically by sensor, Max. Power Consumption 28W,Correction Scale Level 12bits Frame Frequency 260Hz, Screen Refresh Frequency ≥1,920Hz, Gamma Correction -5.0~5.0 , Input Signal Composite Video, S-video,DVI, HDMI,SDI, HD-SDIControlDistance 100m(Ethernet cable);20KM(optical fiber cable).Cloud Controlled, Support VGA Mode 800*600,1024*768,1280*1024, 1600*1200,Color Temperature 5000—9300 adjustable, Brightness Correction Pixel by pixel, module by module, cabinet by cabinet, Working Temperature -20~+60 °G, Stored Temperature -30~+70°C working humidity 10% MTBF 5000 hrs,continious working time>=27hrs protection grade IP65,out of control pixel rate<(> <<)>=0.0.1% installation with iron hanging (Make-LED:Nation Star SMP Ground Floor

MIS-INE-VRFAIRCOND

40008660 Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal box protection for Indoor units PCBs and Panel with Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz & & 3 Phase, 380-400-415V, 50Hz for High Static Ducted Units with other accessories as required for smooth operation of the system of following capacities Wall Mounted Unit /4 way cassette unit of 2.02 TR Nominal Capacity Make- Mitsubishi/ Toshiba/O-General Ground Floor

40008664 Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal box protection for Indoor units PCBs and Panel with Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz & & 3 Phase, 380-400-415V, 50Hz for High Static Ducted Units with other accessories as required for smooth operation of the system of following capacities Wall Mounted Unit /4 way cassette unit Of 3.2 TR Nominal Capacity(PLFY-P100VEM) Make- Mitsubishi/ TOSHIBA/O-GENERAL) Ground Floor

40010722 SITC of Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal housing box protection for Indoor units PCBs, Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz as well as other accessories as required for smooth operation of the system of the following capacities along with Panel. (Make: Mitsubishi /Toshiba/O-General 1.02 TR Four Way Cassette Unit Ground Floor

40011230 Supply, Installation, Testing & Commissioning of the above VRF system including Refrigerant Copper Piping line with insullation between Outdoor to Indoor Units, Drain piping, Communication Cable, Supporting, Channel, Nitrogen Leakage Testing, Vaccumizing,R-410A Gas Charging etc. Ground Floor

40011274 SITC of Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal housing box protection for Indoor units PCBs, Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz as well as other accessories as required for smooth operation of the system of the following capacities along with Panel. (Make: Mitsubishi /Toshiba) 1.55 TR Four Way Cassette Unit Ground Floor

40011278 Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal box protection for Indoor units PCBs and Panel with Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz & & 3 Phase, 380-400-415V, 50Hz for High Static Ducted Units with other accessories as required for smooth operation of the system of following capacities Wall Mounted Unit/4-way Cassette Nominal Capacity of 2.5 TR Make- Mitsubishi/ TOSHIBA/O-General Ground Floor

40011282 SITC of Indoor units complete with cooling coil, electronic expansion valve, electrical control box, fire resistant metal housing box protection for Indoor units PCBs, Auto By Pass Technology, inspection inlet for easy access to the unit, suitable for operation at a power source 1 Phase, 220-230-240V, 50Hz as well as other accessories as required for smooth operation of the system of the following capacities along with Panel. (Make: Mitsubishi /Toshiba/O-General) 4.0 TR Four Way Cassette Unit Ground Floor

40011286 Cordless Remote Controller for Wall Mounted & Cassette units (Make: Mitsubishi /Toshiba-Carrier) Ground Floor

40011665 Supply of Air Cooled Type Variable Refrigerator Flow System based on 100% Inverter scroll Compressor with linear capacity control , IPM Technology, VET Technology, PWM overmodulation control , unique HIC Circuit , self diagnostic auto check , auto restart, built in Auto Phase Reversal & Auto Bye pass Function, Inverter start technology complete with R410A refrigerant based Outdoor & Indoor units wired /wireless central remote controllers, refrigerant connectors & Joints, copper rfrigeretor piping , control <(><<)>(>&<(><<)>)> transmission wining condensate drain piping and other acessories as required and detailed in the secification. VRF OUTDOOR UNIT Modular type imported low noise outdoor condensing units, comprising of own made Low Pressure Shell type Inverter based Multi valve Scroll Compressor housed in a separate Fire protected enclosure, 6 Pole Motor, Induction type Heater , Suction Gas Cooled Compressor Motor Accumulator , Blue fin treated condensr coil for corrision resistant BLDC Condensor fan motor , high ESP and low noise aerodynamic condenser fan, protection device for inverter circuit (Comprssor/fan) and fan motor, capable to operate at a temperature range of 15 degree centigrade to 52 degree centigrade.(Cooling mode) ambient condition. Capacity: 10 HP Cooling only inverter scroll (Make-Mitsubishi/TOSHIBA/O-Genearl) Ground Floor

40012327 Supply of Air Cooled Type Variable Refrigerator Flow System based on 100% Inverter scroll Compressor with linear capacity control , IPM Technology, VET Technology, PWM overmodulation control , unique HIC Circuit , self diagnostic auto check , auto restart, built in Auto Phase Reversal & Auto Bye pass Function, Inverter start technology complete with R410A refrigerant based Outdoor & Indoor units wired /wireless central remote controllers, refrigerant connectors & Joints, copper rfrigeretor piping , control & transmission wining condensate drain piping and other acessories as required and detailed in the secification. VRF OUTDOOR UNIT Modular type imported low noise outdoor condensing units, comprising of own made Low Pressure Shell type Inverter based Multi valve Scroll Compressor housed in a separate Fire protected enclosure, 6 Pole Motor, Induction type Heater , Suction Gas Cooled Compressor Motor Accumulator , Blue fin treated condensr coil for corrision resistant BLDC Condensor fan motor , high ESP and low noise aerodynamic condenser fan, protection device for inverter circuit (Comprssor/fan) and fan motor, capable to operate at a temperature range of 15 degree centigrade to 52 degree centigrade.(Cooling mode) ambient condition. Capacity: 20 HP Top Discharge ODU inverter scroll (Make-Mitsubishi/TOSHIBA/O-General) Ground Floor

MIS-INE-WIFISYSTEM

40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor

40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor

40010005 Supply and Installation of Cat6 I/O Single with Face plate:Tool-less type (Make-D-link/Molex) Ground Floor

40012284 Supply , Installation of RJ45 Connector Make-D-link/Digisol/Molex Ground Floor

40012306 Supply, lnstallation,testing & Commissioning of Next Generation Firewall including 3 Years Subscription, support and warranty. N.B-Manufacturing Authorization Form (MAF) or a single-line confirmation from the OEM regarding the purchased product, including detailed model no & serial numbers provided directly by the OEM or its authorized officials to verify the genuineness of the product. Make-SonicWALL (TZ-80)/Fortinet (80F) Ground Floor

40012849 Supply of 11ax Wi-Fi standard MTK Chipset high power industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming. Combined 1800Mbps Wi-Fi speed over2 radios: 2.4GHz (600Mbps 11ax2*2) + 5GHz (1200Mbps 2*2), equipped Gigabit WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation, faster Ethernet data rate. Make-Digisol (DG-WM820AX)/D-Link (DAP‑X2810 AX1800) Ground Floor

40012851 Supply of Enterprise Gateway & WLAN Controller based on CAPWAP protocol. Support Load Balance, Ethernet backup and Ethernet Su perimposed, multi-ISP access; then support DHCP, policy routing and VPN, together with Smart flow control, Abundant security, varied user management and multiple authentication function, it consistent to provide high efficiencyand professional network connectivity for rooms. Make-Digisol(DG-WU2004)/D-Link (DNH‑100) Ground Floor

40012853 Installation, Programming, Testing & Commissioning charge for WiFi Access Point Ground Floor

40012855 Installation, Programming, Testing & Commissioning charge for WLAN Controller Ground Floor

MIS-IPH-DRSHED

10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor

10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor

10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor

10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor

10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor

10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor

10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor

10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor

10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor

10001080 Providing and fixing 110mm dia. PVC Nahani Trap without jally of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls/ floors all complete as per specification. Make: ORIPLAST/SUPREME/FINOLEX. 110mm dia. PVC Nahani trap without jally Ground Floor

10001098 "Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX "110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor

10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor

10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor

10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor

10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor

10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor

10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor

10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor

10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor

10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor

10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor

10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor

10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor

10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor

10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor

10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor

10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor

10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor

10001164 Providing and fixing under counter wash basin with hole for pillar taps including cutting holes on slab, fixing accessories and making good the damages etc. all complete with fixing of 15mm dia. CP pillar cock, PVC waste pipe, CP waste as per specification. Vitreous china flat back wash basin size 485x370x205 mm. Make: JAQUAR (For basin-CNS-WHT-701, For Pillar cock-CON-021, for 32mm full/ half thread CP waste-ALD-705/709). Vitreous china Under Counter wash basin 485x370x205mm. Ground Floor

10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor

50014253 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering<(>,<)>fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel-JINDAL/NIPPON of premium quality, Signage-3M (90CM EQUILATERAL TRIANGLE)# Ground Floor

50014255 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (80cmX60cm Rectangular) Ground Floor

50014257 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60cm circular) Ground Floor

50014259 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90cm circular size) Ground Floor

50014261 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60CmX45Cm Rectangular) Ground Floor

50014263 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90 cm high octagon) Ground Floor

50014265 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60X60 cm square) Ground Floor

50014267 Manufacturing, supplying and fixing informative retro reflective sign boards/ prismatic retro reflective information sign board made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c and screws and anchor bolts including making holes in plates, providing & fixing ACP message plate of required size. The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect to fix on the wall. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor

50014269 Manufacturing, supplying and fixing retro reflective sign boards (single side) 8’x6’ made up of 3mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 40mmx40mm along with theft resistant measures, mounted and fixed with 4 Nos. S.S. square tube of 40mmx40mm to a vertical post made up to S.S. tube of schedule 40 of 50mm dia welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 50mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. FOR 2 VERTICAL POSTS. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor

a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC),JK SUPER(PSC),JINDAL PANTHER(PSC)

APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK

Provision For 5 Year Repair & Maintenance (as stated in DTCN cl no.111) 1.75%

Please Enable Macros to View BoQ information