REPAIRS TO ROOF TREATMENT, PLASTER, B/R MISC WORKS AND COMPOUND WALL AT DGQA OF AGE B/R (SOUTH) NO. II UNDER GE (SOUTH) SECUNDERABAD

Amount

Removal of old roof treatment of any description and roughening the surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc including and removing the debris to a distance of n.exc 100 m away from plinth protection complete all as specified and as directed.

Demolition of cement concrete in roof incl existing roof teratement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) ype B0 by using 12.50 mm graded stone aggregate as in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.

M & L 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and as directed.Note : WPC will be measured and paid separately.

M & L cutting grooves in brick wall of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed.

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and apply hot bitumen VG - 30 @ 1.20 Kg/Sqm over applying APP based polymeric membrane minimum weighing 3.5 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) by forced hot torch application and apply bitumen base Aluminium paint @ 0.20 Kg/ Sqm complete all as specified and as directed.

Supply only water proofing compound

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm dia complete all as specified and as directed.

S&F 20mm steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

Demolation of Brick or stone masonry built in cement mortar complete all as specified and as directed.

M/L for stone masonary ( Except Material) uncoursed, built in CM 1:4 well bonded and bedded and solid straight or curved exceeding 6m mean radius complete all as specified and as directed.

Taking down plastering on brick walls/ celing etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and as directed.

M/L rendering 15mm thick in two layer ( 10 + 5 mm) CM 1:4 on fair faces of brick or concrete surface II nd layer 5 mm thick with 3% of Water Proofing Compound and finishing the surfaces even and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formwork complete all as specified and as directed. (Note : WPC Shall be measured and paid seperately)

M & L for 10 mm thick rendering in Cement Mortar 1:4 on soffit of slab/sun shade of Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed.

M&L for applying two coats of Dr Fixit Rain coat over acoat of prime seal primer incl preparation of newly plastered surface of wall complete all as specified and as directed.

M&L preparation of newly plastered surface of celing and applying three coats of white wash complete all as specified and as directed.

Removal of existing treatment on walls and applying two coats of OBD Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint complete all as specified and as directed.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Taking down rain water pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints incl incl all fittings heads, shoes bends etc complete all as specified and as directed by Engr in Charge.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and as directed.

Demolation of reinforced cement concrete of any descripition and any position not other wise specially provided complete all as specified and as directed.

Dismantling of fencing wire mesh any type complete all as specified and as directed.

Dismantling of wrought Iron mild steel work of any descripition and other wise provided for complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in hard / dense soil complete all as specified and as directed. ( NOTE : - Excavation in Nalla portion )

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in soft/ disintegrated rock hard / dense soil complete all as specified and as directed.

M&L for cement concrete type C2 (1:3:6) (40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L form work to sides of concrete footing, bases of columns such as plinth beam, sides of concrete foundation, and similar work rough finished surfaces of flat concrete complete all as specified and as directed.

M&L form work to sides of concrete columns and similar work rough finished surfaces of flat concrete complete all as specified and as directed.

M&L form work to sides of concrete RCC/PCC bands and similar work rough finished surfaces of flat concrete complete all as specified and as directed.

M&L form work to soffit of slab and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of flat concrete complete all as specified and as directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars complete all as specified and as directed.

M&L for mild steel TMT bars 5 to 10 mm dia and over cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) as in stirrups etc complete all as specified and as directed.

M&L for Reinforced cement concrete (Design Mix ) M 25 (using 20 mm graded stone aggregate) using footing, foundation beams, plinth beam, bases of columns etc complete all as specified and as directed.

M&L for Reinforced cement concrete (Design Mix ) M 25 (using 20 mm graded stone aggregate) using of slab supported on wall etc complete all as specified and as directed.

M&L for Reinforced cement concrete (Design Mix ) M 25 (using 20 mm graded stone aggregate) using of RCC Beam/Bands etc complete all as specified and as directed.

M&L for Reinforced cement concrete (Design Mix ) M 25 (using 20 mm graded stone aggregate) using of columns etc complete all as specified and as directed.

M&L for reinforced cement concrete (Design Mix ) M 25 (using 20 mm graded stone aggregate) as in basement wall, blast wall and like any thickness incl attached pilasters and buttresses etc complete all as specified and as directed.

M&L for brick work with flyash brick, in cement mortar 1:6 with straight or curved on plan exceeding 6m mean radius all as specified all as specified and as directed

M/L for randam rubble un coursed well bonded stone masonary wall built in CM 1:4 straight or curved exceeding 6m mean radius complete all as specified and as directed.

Returing and filling in including spreading, levelling watering and well ramming in layers n.exc 25CM in hard dense soil complete all as specified and as directed.

Returing and filling in including spreading, levelling watering and well ramming in layers n.exc 25 CM insoft/ disintegrated rock soil complete all as specified and as directed.

Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L Rendering 15mm thick using CM 1:6 on fair faces of brickwork or concrete sur faces even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for broken Glass coping on top of wall in CM (1:3) 25mm thick with 10.0 Kg/Sqm Glass complete all as specified and as directed.

M&L for MS Rolled sections as in framing for Grill made with angle / square bars as per site requirement complete all as specified.and as directed..

Dismanting asbestos cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and as directed.

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F prepainted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L MS Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails other connecting plates of Fe 410 -W (Gde- E- 250) complete all as specified and as directed.

M&L for preparation of New steel surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of Red oxide primer complete all as specified and as directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

A SOMA RAJU

LAKSHMI ENGINEERS

M/S DIVIJA BUILDERS

rahi consultant