CA NO GE S U 72 2022 23 PROVN OF DRAIN SECURITY FENCING PATH WAY CAR PARKING SHED AND ADDN ALTN IN BLDG NO NP 126 DBO AT HQNC UNDER AGE BR II GE SOUTH UDHAMPUR

Amount

Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation etc or similar work and getting out in any type of soil complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Plain cement concrete1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in channels and drains, foundation and similar work etc complete all as specified and as directed.

PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) as in drain, walls and similar work etc complete all as specified and as directed.

Walling of random rubble uncoursed well bonded bedded and solidly hearted bult in CM 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in drain etc and similar work complete all as specified and as directed.

Boulder filling dry, hand packed tightly, as in back side of retaining wall and similar work complete all as specified and as directed.

M&L for hand packing with broken stone or boulders (any thickness) at back of wall over arches etc and rising (or lowering) to the required level complete all as specified and directed.

Raised pointing to random rubble or polygolal rubble uncoursed of brought upto courses in cm 1:4 complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble masonary coursed or uncoursed in CM (1:3) complete all as specified and as directed.

PVC (SWR) pipes (75mm Dia) single socketed in any length with rubber joints laid in tranches, floor/weep holes and similar work complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated soil to a distance exc 50m and nexc1.50 km dout side defence land complete all as specified and as directed.

Precast Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) for drain cover,manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed. (Note:- reinforcement will be measured and paid seperately.)

Mild Steel TMT bars 6-8 mm dia and over, cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

300 mm dia Reinforced concrete pipes, class NP-2 laid and jointed complete with collars complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 for concrete bed to 300 nmm dia RCC drain pipe including packing under , and haunching against the sides of pipes after they are laid & tested complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

Hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished, even and fair complete all specified and as directed.

25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and as directed.

Vitrified tiles (Dura stone heavy duty) of size 300 x 300mm x8-10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface over 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Chequered cement concrete (glossy finish) tiles 25cmx25cmx25mm thick or 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Preparing new or old surfaces (plastered or unplastered) of walls and applying two coats of cement base paint complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(Using 20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

Mild Steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

Precast cement concrete 1:3:6 type C1 (20 mm graded stone aggregate) as in bond stone set in cement mortar complete all as specified and as directed.

S&F for PVC (SWR) pipes(110mm Dia) single socketed in any length with rubber joints laid in trenches, floor and similar work complete all as specified and directed.

Excavation in post holes each n.exc 0.5 cum, getting out, returning filling in and ramming earth around in layers not exc. 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface as in hard/dense soil complete all as specified and as directed.

Framed work such as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Hand rails, half rounded or other steel section , posts and struts in fencing including cutting tops to shape as directed, water tank staging with guard cover, purlin and rafter work , including drilling holes, notching for wire including all neccessary drilling, bolting or riveting etc and similar work complete all as specified and as directed.

S & F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed.

S&F chain link M S galvanised fencing any size or type including line wire, any mesh size and type to any type of standard rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

M&L Round bars 10mm dia and over, cut to length, bent to shape required, including bending,hooking ends, with mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-290 Gde E-165 as in chian link fencing complete all as specified and as directed.

Mild Steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends , each screwed ends to be fitted with washers and one hexagonal or square nut, length exc 5 cm but n exc 10 cm dia of neck 11 to 15mm complete all as specified and as directed.

Preparation of newly steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard & dense of soil complete all as specified and as directed.

Excavation over areas, n.exc 1.5 m deep and getting out in soft & loose soil complete all as specified and as directed.

Providing 75 mm thick cement concrete ( 1:4:8) type D2 using 20 mm graded crushed stone aggregate as in sub base for hard paved area complete all as specified and as directed.

Sand cushioning/filling under floors for laying interlocking tiles complete all as specified and as directed.

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade of approved colour and design complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and as directed.

Preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two Coats of cement base paint over a coat of primer complete all as specified and as directed.

Reinforced concrete pipe 200 mm dia,class NP-2 laid to floor and wall jointed complete with collars complete all as specified and as directed.

M&L for concrete bed to drain pipes 200 mm dia type 1:3:6, C-2 including packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Steel work in tubular trusses /vertical posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

S&F rolled section as in main and cross beams , hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding gates , doors fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet with all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete all as specified and as directed. Colour as approved by GE. (Make: Rajshree/Sintex or equivalent as approved by GE).

S&F PVC steel catcher of superior quality all complete all as specified and as directed.

S&F 100 mm long stainless steel alloy handles, decorative type, complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or elecrogalvanised width of flaps when open in 30mm and fixed complete all as specified and as directed.

S&F rolled Mild steel sections as in frame work for framed work to cup board, hold fast, fixing of cup board and similar work, water stanging cage, main and cross beams hip and jack rafters, purlines fixed independently and similar work including welding & demolition of wall for fixing of hold fast as per requirement complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work n. exc 200mm thick finished rough complete all as specified and as directed.

Mild Steel TMT steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire annealed not less than 0.9mm dia complete all as specified and as directed.

M & L for granite ( of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified and as directed.

S&F 125mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

S & F 35mm thick, flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30mm thick IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc; sizes of members of shutters as specified in approved SSR Part I fitted to chowkats complete all as specified and as directed.

S&F 150 mm brass barrel tower bolts,with cast or sheet and rolled or cast bolts complete all as specified and as directed.

S&F 300mm mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and as directed.

S & F 125 But hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type C-12 complete all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised complete all as specified.

PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per site requirement complete all as specified and as directed.

S&F GI pipe medium grade 15 mm bore in wall and ceiling or laying in floors, including new fittings as required at site complete all as specified and as directed.

S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or Laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm fixed as in repair complete all as specified and as directed.

S&F 15 mm bore bib taps, long body with wall flange with arreator fency type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises, complete all as specified and as directed.

Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

M&L for double charged vitrified ceramic tiles, area of each tile exc 0.18 sqm but n. exc 0.36 Sqm , 10mm thick (square or rectangular) of superior quality as in floor and walls surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour glazed ceramic tiles of size 600 mm x 300 mm x 7 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1 (Using 20 mm graded crushed stone aggregates) as inslab supported on walls, beams and columns, in forrs, roofs complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed.

M&L new plaster surface of walls and applying two coat of oil bound distempers over one coat of primer and two coat of wall care putty complete all as specified and as directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat primer with two coat of wall care putty complete all as specified and as directed.

Powder coated aluminium for supporting to Cantilever cup board frame, sliders for partition, doors, windows with one or more rebates and aluminium structure made frames jointing heavy cleats for fixing etc complete all as specified and directed thickness of powder coating not less than 50 micron complete all as specified and as directed.

S&F 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed cement concrete type B1(1:2:4) complete all as specified and as directed.

Dismantling of PVC Pipes of dia 75/110 mm complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall with MS clamp complete all as specified and as directed.

S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

RAMAN CONSTRUCTION CO

VISHWANATH AND SONS

vijay constrction co

khajuria builders

M/S ASHOK KUMAR PACHIALA

VARDHMAN INTERNATIONAL