Supply, Installation, Testing and commissioning of 25 KVA silent DG set and 63 Amps ATS panel for Dialysis centre at RMD Varca Orlim/subcentre carmona/salcete. (call no.5).

Supply, Installation, testing & Commissioning of 25 kVA, SILENT Diesel Generating Set 3 Phase 4wire 50 HZ 415 v with approved acoustic enclosure comprising of: naturally aspirated water Cooled, high speed Diesel engine having mechanical Governor & Rated speed of 1500 RPM complete with standard accessories.coupled to Alternator rated at 25 kVA at 415 Volts, 3 phase mounted on Channel Iron Base Frame complete with required foundation of pcc as required with antivibration Mounts ,class II insulation and approval from regional electrical inspector and concerned electricity department (fees to be born by the Agency).integral Fuel Tank of minimum 60 Ltrs capacity,,Exhaust system (bellow & silencer with piping between bellow & silencer) AMF Control Panel & 63 A ATS panel having DG controller Relays & control MCBS Fuse ,MCB 4 P for power circuit - 1No including IN AMF logic battery charger & In AMF ATS battery charger and 1 No. Battery of required capacity as per manufacturers design . Engine of make VECV, PAI KANE Diesal Genset Model PKGVE-25 , 25 KVA Mahindra powerol DG set with enclosure AMF logic panel . Alternator of make ,leroy sommer,with class H insulations The DG with AMF panel shall be as per enclosed specifications. Generator should confirm CPCB IV guidelines.

Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm diamimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value. Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode.

2 metres length electrode

Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 1/2 Core 25 sq.mm

Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4 Core 10 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

3 1/2 x 25 Sq. mm.

Supply & Laying 6 Core x 1.5 Sq mm, Cu Control cable

termination of 6 core 1.5 sq mm cable

Supply and laying of 1 inch flexible pvc pipe for earthing

Electrical permissions required for performing the job

Please Enable Macros to View BoQ information