Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹46.6 L+₹95,803.40 (2.10%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹47.2 L+₹1.6 L (3.49%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹54.5 L+₹8.9 L (19.5%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹55.7 L+₹10.1 L (22.1%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
2 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS, RAJOURI
Special repair to Bldg No T-39, T-13 and certain provn work of AGE BR Dett A and AGE EM under GE 862 EWS
2023_MES_616979_1
GER-40/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D, a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹96,000
Yes
1 Dec 2023
2 Sept 2023
4 Oct 2023
2 Sept 2023
2 Oct 2023
18 Sept 2023
4 Sept 2023 - 9 Sept 2023
Amount
Sch 'A' Part-I (B/R works) Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil for foundation, etc, or for shafts, wells, drain pipes laying of cables etc, n.exc 10 Sqm on plan and getting out, complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick ,complete all as specified and as directed.
Removing excavated material exceeding 50 m but n.exc 250m and depositing where directed at a level not exceeding 1.5 m above the starting poin, complete all as specified and directed.
Removing excavated material ,not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting poin, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub base, foundation, filling and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete M-25 (Design mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed
M&L for reinforced cement concrete M-25 (Design mix) (using 20mm graded stone aggregate) as in lintel beams and the like, complete all as specified and directed
M&L for reinforced cement concrete M-25 (Design mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, post, struts and the like, complete all as specified and directed
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed.
M&L formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, in rough finished flat surface of concrete, complete all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surface in cement mortar 1:3 on ceiling, finished even and smooth with sagol cement ,complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of white wash over a coat of primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash over a coat of primer, complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.
M&L for Anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for anodised aluminium (minimum thickness of power coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges - 03 Nos, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed to aluminium door, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 350x250x7mm or 450x350x7mmthick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.
S&F for 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hings pin anodised and fixed type C-21, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts 125 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.
S&F for 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty / wooden beads in squares n . exc 0.50 sqm in each pane complete all as specified and directed.
M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Chagre.
S&F for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed.
S&F for viterous china wash down water closet pan, white (pedestal pattern), complete and connection to single symphonic action type PVC flushing cistern 10 ltr capacity and fixed in floor with brass screw complete all as specified and directed by Engr-in-Charge.
S&F for vitreous China water closet (squatt pan) Orrisa pattern 630x450 mm size pan, white, with front or back inlet with integral 'foot rests (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets connections to flushing cistern with flush pipe, complete all as specified and directed.
S&F for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
M&L for 15mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L for 15mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed, complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union screwed for iron pipe and fixed, complete all as specifed and directed.
M&L for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps or in floor, or as in weep hole, complete all as specified and directed.
M&L for 75mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
M&L for 75mm bore PVC (SWR) vent cowl, complete all as specifed and directed by Engr-in-Charge.
M&L for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor trenches, or as in weep hole, complete all as specified and directed.
M&L for 110mm bore PVC (SWR) bend any redius, complete all as specifed and directed by Engr-in-Charge.
S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
M&L for 110mm bore PVC (SWR) 'S' trap, complete all as specifed and directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6, type-C-2 (using 40mm grade crushed stone aggregated) as in bed to drains pipe including packing under and haunching agsinst the sides of pipe after they are laid and tested for salt glazed stonewere pipe 150mm dia, complete all as specified and directed.
M&L for salt glazed stonewere pipe 150mm dia in any length laid in trenches and jointing in cement martor 1:1, complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed.
S&F 110mm bore PVC (SWR) branch piece single (single 'Y') equal or unequal, complete all as specifed and directed.
S&F for standing urinal including waste pipe coupling, floor trap, including necessary fittings complete all as specifed and directed Engr-in-Charge.
M&L for construction of septic tank with cover slab of RCC M-25 (Design mix) for 50 users capacity , brick work in CM 1;4 (with top of slab at ground level) including returning , filling, well ramming in layers and removing excavated surplus soil to a distance not exc 50m, RCC manhole cover with angle iroon welded frame complete permanent specification and complete all as shown on drawing No CE/TD 1202/2003 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge.
M&L for construction of soakage well 3.6 m dia and 3.00 m deep below inlet (depth) from inlet pipe to ground level 45cm including excavation and earth work in any type of soil, PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) in foundation, walls of honey combed brick work in CM 1:4, RCC cover slab in M-25 (design mix), filling with brick bats earth cushion on brick lining on top and inlet pipe 150mm dia complete all as specified and shown on drawing No CE/TD 1202/2003 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for providing pre-cast cement concrete landing cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-0 using 12.5mm grading stone aggregate and setting in cement morter 1:6, complete all as specified and directed
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc, complete all as specified and directed.
M&L for hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and remmed to a true surface, complete all as specified and directed.
M&L for reinforced cement concrete M-25 (Design mix) (using 20mm graded crushed stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.
M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S . frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
S&F for 75mm long butt hinges medium weight cold rolled mild steel , complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for extruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked), complete all as specified and directed.
M&L for 110mm dia cast iron trap P or S, complete all as specifed and directed by Engr-in-Charge.
S&F for vitreous China wash hand basin, white, bowl type of size 550x 400mm with pedestal including cutting for fixing new brackets ,complete all as specified and directed.
S&F for soap dish, any type, fixed to plug with chromium plated, with chromium plated brass screws complete all as specified and directed.
S&F for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as in repair all as specified and directed.
M&L for water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:4 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/ Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat. Note :- (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (iii) Rate of WPC included in the quoted rate.
S&F for push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (maximum weight 15mm - 50 gms), complete all as specifed and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.
S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
M&L for 15mm bore stop valve (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L for 150mm long (lenth of bolt) aluminium alloy, anodised, sliding door bolt with hasp, stapl (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruced sections or cast aluminium alloy anodised (ISI marked) complete all as specified and directed.
S&F for 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure with capstan head with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screws for iron pipe, complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 (20mm graded crushed aggregate ) as in surface channels and drains and similar work, complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in hard /dense soil, complete all as specified and directed.
M&L for plain cement concrete, type B-2 1:2:4, (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete as in post, complete all as specified and directed.
S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, embedding in concrete, complete all as specified and directed. Note :- (i) Size of angle shall be as per standard drgs. (ii) Earth work and concrete shall measured & paid for separately under respective items of this BOQ.
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured), complete all as specified and directed.
Supply only chain link MS galvansied fencing, 4mm dia made of GI mesh 50mmx50mm with straining bolts, complete all as specified and directed
Fixing only chain link MS fencing, including line wires, any size and type straining bolts etc with 10mm dia round bars and flat iron 40mm x 6mm thick, binding and jointing complete including all necessary drilling bolting or reveting etc confirming to Fe-410, including provision of binding wire, complete all as specified and directed (Note: MS flat and 10mm dia round bar shall be measured and paid seperately)
Supply only mild steel work in MS flat for securing chain link fencing with posts/struts and fixed with nuts/ bolts and similar items conforming to Fe-410 -(Gde-E-250) quality, complete all as specified and directed
S&F for concertina coil 600 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 7-8Kg / Coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.
Supply only mild steel round bars 10mm dia and over cut to length bent to shape requried including binging with MS anealed wire not less than 0.9mm dia or securing clips with fancing wire mess, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 410-0 or Fe310-0 work including welded fabricks frames, gate and framed truss, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc,complete all as specified and directed.
Dismantling fencing wire mess any type and size, complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 of any size after dismantling old unserviceable of kota stone, complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.
Description all as per srl item No. 95 above but except stone. NOTE: Old stone retrieved from demolition shall be used.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing ceiling board etc, complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.
Dismantling of framed trusses n.exc 10m Span of any description complete all as specified and directed.
Fixing only of roof truss (framed) trussed purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, cnanelor flat section gusset plate) including distance piece, cleats etc, complete all as specified and directed.
S&F for roof truss (framed) trussed purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, cnanelor flat section gusset plate) including distance piece, cleats etc, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 20 mm thick in cement mortar 1:6 on stone masonry surface and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 20 mm thick in cement mortar 1:4 (external surface) on stone masonry surface and smooth without using extra cement, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for RCC beam & slabs, complete all as specified and directed.
M&L for reinforced cement concrete M-25 (using 20mm graded crushed stone aggregated) as in beams, deck slabs, chajjas and in shelves and like, complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-1 using 20mm graded stone agregate complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F for factory made MS tubular box type window of MS rolled steel section confroming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer opnable frames shall be facbricated of section as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of Z section welded with openable frame box steel section (consisting of both shutter galzed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided all shutters of windows shall be provided with 4 Nos friction free hinges 2 Nos 75mm tower bolts to each leaf of window one at top and one at bottom welded on 3mm thick steel sheet piece of suitable size which shall be in turn welded to Z section steel window to provide suitable arragement of using tower bolt and 1 nos bow handle in each shutter galzed shutter and gauged shutter of window mild steel casement stays 300mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without galzing bars, 3mm sheet glass in galzed shutter and GI wire mesh of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter etc complete all as specified and directed.
S&F for chimney bars (straight or camber), bearing bars, tongues or water bars for window frame, window guard bars, plain let in and fixed independently in wooden frames, L or T section supports for shelves etc and similar articles conforming to Fe-290 Gde E-165, complete all as specified and directed.
S&F for 300mm long ordinary rat tail rod pattern springs including roller plate, complete all as specified and directed.
S&F for second class hard wood small fitting such as brackets of any type latch and hings blocks, shaped door and window stops and the like, including all necessary labours articles n exc 200 cm each, complete all as specified and directed.
S& F in repair for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm long of extruded section (ISI marked) ,complete all as specified and directed.
M&L for 250mm long (lenth of bolt) aluminium alloy, anodised, sliding door bolt with hasp, stapl (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruced sections or cast aluminium alloy anodised (ISI marked) complete all as specified and directed.
M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer, complete all as specified and as directed by Engr-in-Chagre.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall care putty, complete all as specified and directed.
M&L for preparation of old steel surface exc 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed by Engr-in-Chagre.
M&L for preparation of new / old plastered sufrace of wall and applying two coats of cement base paint, complete all as specified and directed by Engr-in-Charge.
M&L in repair for drapery rod (curtain road) of wooden finishes of 25mm dai fancy type including hanging hooks/ brackets / end caps of length 1.5 m to 1.8 m each in complete, complete all as specified and as directed by Engr-in-Chagre.
Complete removal of existing treatment of wall surfaces incl and applying two coats of cement base paint,complete all as specified and directed by Garrison Engineers.
Complete removal of existing treatment of old plastered surface of walls, preparing surface including washing rubbing down and stopping of walls and applying two coats of distemper oil emulsion over a coat of wall care putty, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size or 450x350 x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles, complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 over and including 25mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggreagatesincluding dismantling of old tiles, complete all as specified and as directed.
M&L for vitrified ceramic tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
S&F for pressed steel door frame of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-1 using 20mm graded stone agregate complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.
Taking down GI tubing of 15/20 mm dia and connection and incl cleaning for refixing or removal , complete all as specified and directed.
Fixing only 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
S&F for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed.
S&F in repair for 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium roa and high density plastic ball screwed for iron pipe and fixed (min wt 15mm-142grms / 20mm 210 grms), complete all as specified and directed
M&L in repair for 15mm bore stop valve (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set, of CP zonal Jet, complete all as specified and directed.
S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
M&L in repair for 15mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L in repair for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps or in floor, or as in weep hole, complete all as specified and directed.
M&L in repair for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps or in floor, or as in weep hole, complete all as specified and directed.
M&L in repair for chromium plated shower roses with or without swivel joints any size including fixing to steel pipe or union, complete all as specified and directed.
S&F in repair for chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised including one pair of brass chromium plated brackets, complete all as specifed and directed.
S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm excluding taps, waste chain and plug and pocelan stopper but including brackets ,complete all as specified and directed.
S&F in repair for brass cromium plated brass wash hand basin mixer for mixing hot and cold water for wash hand basin of 15mm dia screwed down for iron pipe, complete all as specified and directed.
S&F for 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
S&F in repair for 100 mm dia PTMT grating doom stainless steel with waste hole for waste pipe (minium weight 25 grm), complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismatling of old unserviceable water tank, complete all as specifed and directed.
S&F for 15mm brass chromium plated health faucet for EWC with 1.25 mrt long flexibel pipe at ABS wall hook with all fittings, complete as in repair all as specified and directed.
S&F for anodised aluminium (minimum thickness of power coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no.) suitable handle (1no), complete all as specified and directed.
Taking down aluminium doors / window, partition of any description including all fittings and fixture, complete all as specified and directed by Engr-in-Charge.
M&L for salt glazed stonewere pipe 150mm dia in any length laid in trenches and jointing in cement martor 1:1 including old unserviceable salt glazed stonewere pipe, complete all as specified and directed.
M&L for chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub base of floors and mass concrete, complete all as specified and directed.
Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.
M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including PVC casing caping medium grade of 25mm width complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)
Description all as per Serial item No 160 above but for one 3 pin 5 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 160 above but for one 3 pin 5 Amp socket outlet on same board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 160 above but for one 5 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.
M&L for switch piano, flush type single pole, one way 5 Amp, 240 volts complete all as specified and directed.
M&L for switch socket outlet multipurpose 2 in 1, flush type single pole, one way 3 Pin 5 Amp, 240 volts, complete all as specified and directed.
S&F for ceiling rose 3 phase / PVC / polycarbonate isolated body surface bakelite 2 to 3 terminal, 63.5 x 17mm complete all as specified and directed.
S&F for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 7 / 9 watt complete all as specified and directed.
M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete all as specified and directed.
S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 9/10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.
Supply, laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 Sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).
S&F for speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR part-I and as directed. Note: punned thickness of sand shall be measured.
Supplying and laying brick covering with width equal to length of brick as mechenical protection of size 230mm x 115mm x 75mm complete all as specified and directed.
M&L for 40mm bore galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for protection, complete all as specified and directed.
S&F for MCB distribution board SPN 4 way, double door 415 volts duly painted with epoxy based powder coated painting suitable for mounting MCB TP/FP as incomer and outgoings complete with busbar, neutral bar, earth bar connecting cable links with top and bottom removable gand plate with IP 42 protection, complete as in repairs all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for MCB single pole & neutral 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion, complete all as specified. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)
M&L for 20mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed, complete all as specified and directed.
M&L for cutting the existing 40mm tubing and inserting new GI tee including necessary screwing threading, tail pieces, short pieces, jointing material etc, complete all as specified and directed by Engr-in-Charge.
M&L for switch piano, flush type single pole, one way 15 Amp, 240 volts complete all as specified and directed.
M&L for switch socket outlet multipurpose 2 in 1, flush type single pole, one way 5 &15 Amp, 240 volts, complete all as specified and directed.
S&F for exhaust fan of 250mm sweep, heavy duty, 1200 RPM electrical operated 230 Volts AC single phase with PVC body with all accessories and louver etc including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F for LED street light fitting 35 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting , complete all as specified and directed
S&F for exhaust fan of 300mm sweep, heavy duty, 1200 RPM electrical operated 230 Volts AC single phase with metal body with all accessories and louver etc, complete all as specified and directed.
M&L for 25mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed, complete all as specified and directed.
S&F for 25 mm bore galvanised steel GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.
S&F in repair for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 7 / 9 watt complete all as specified and directed.
S&F for ceiling fan regulator elctronic, flush type, hum free suitable to control speed of fan from 0 to 100% rotary type five step 240 volts AC complete all as specified and directed.
S&F in repair for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 9/10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.
Taking down,ceiling fan, exhaust fan/ pedestal fan sealing cable end, dismantling blades and removing fan and blades to store and painting of ceiling fans complete, in situ with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust etc, completed all as specified and directed.
M&L in repair for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L in repair for MCB single pole, 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for MCB single pole & neutral 240 volts any rating from 6 to 40 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands including taking down old cable, complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)
M&L for bell push flush type 5 Amps single pole one way 230 volts , complete all as specified and directed.
M&L for call bell multi music, isolated body on PVC board, complete all as specified and directed.
M&L in repair for LED Tube light fitting, complete with 1x 10 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete all as specified and directed.
S&F for LED building street light fitting 25 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type, complete all as specified and directed
S&F for street light bracket made up of 40mm bore light grade GI pipe 1.2 m long including necessary bending welding etc, complete all as specified and directed
M/S SURINDER PAL
RAJINDER CHOUDHARY
M/s Anil Engineers & Builders
M/S Narinder Pal Choudhary
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .