ACChikkaih_2025

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner with copper coil conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with Rotory compressor operating on Non CFC Refrigerant suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with 3 star rating of as per BEE specification and capable of performing the functions of Cooling Dehumidifying Air Circulating Filtering The installation works for the above split type AC units includes the following. 1.Mounting / Fitting Indoor and outdoor units at their respective locations. 2. Laying refrigerant pipeline of required length connecting not exceeding 3 metre Length and both units after drilling hole/holes in the wall if required. 3. Insulating the suction pipe with expanded polyeurethene foam 5mm tubing. 4. Laying 25mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit 5. Leakage testing the entire system unit. 6. Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 4 Sq.mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of MS Stand for Fixing the Outdoor unit. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and installation of 5 KVA Electronic Automatic Voltage Stabilizer suitable for operation on 230V, 50Hz Single Phase AC Supply with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Laying of 5/8" and 3/8" Copper Pipe. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and erection of 1.5 sqmm 4 core control cabling between indoor & outdoor unit for communication etc., complete complying with standard specification and as directed by the departmental officer.

Supplying and fixing following sizes of rigid / flexible UPVC drain pipe with suitable clamps etc., for drain water connections from AC indoor units of all types & models upto the location as desired by the Engineer-In-Charge complete with all accessories etc., as required. a) 40mm dia rigid/ flexible UPVC pipe with nitrile rubber insulation. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of WT bulk head fitting with guard (Higher end) suitable for 7W/9W LED lamp etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 3 1/2 X 25 sq mm PVC armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 3 1/2 X 25 sq mm PVC LTUG armoured cable with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination of 3 1/2 X 25 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officer.

Design, engineering, supply fabrication erection, testing, commissioning and handling over of 1 No 16 Person Passenger Lift Machine Room Less (MRL), speed 1.5 m/s with stainless steel panels, disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD and as per the following technical specifications including all taxes and duties. TECHNICAL SPECIFICATION: 1. Location: IAS Academy 2. No of lift: 1 No 3. Type of lift : Passenger Lift 4. Capacity of lift: 16 Persons (1088 kg) 5. Speed : 1.50 Meter/Sec 6. Type of Drive: Specific variable voltage variable frequency V3F drive 50% Power savings with enhanced ride comfort and leveling functions. 7. No of floor: 2 (Ground +1 Upper floor) 8. Total travel: 22 feet 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping. 10. Construction of Car: No 4 finishes High quality stainless steel car, neat Hair Line finish, S.S. Handrail, Granite Flooring. 11 Car Ceiling : Sleek (Medium circular lights) - SS Hairline finish - PVC 12. Position of Machine: Machine Room Less - Gear Less 13. No of landing Entrance: 2 (Ground + 1 Upper floor) 14. No of Car entrance: One in front only. 15. Car Entrance Door: Power operated central opening sliding Door - Stainless Steel (1.5mm) Hairline finish

36. Steel for lift Machinery: To be provided by lift contractor. 37. Servicing and Maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 38. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, Inverter, under voltage protection system etc, complete with all accessories. 39. Provision of Intercom with phone: to be provided by lift contractor. 40. Lift License: Preparation of drawing payment of charges to CEIG and Insurance policies if any and obtaining CEIG safety certificated as per lift act should be done by lift contractor. 41 Floor announciator with music. 42.Special Futures : (a) Infra red door sensor with full height screen. (b) Full width half height rear panel Mirror. (c) Tubular stainless steel handrail in side the car for Physically chalanged person. (d) Voltage stabilizer for circuit control. (e) Stainless steel signal fixtures. (f) Vandal proof S.S button with S.S Cover. (g) VF door operator. (h) Call register Signal (i) Stainless steel fascia plate for car operating panel and landing fixtures. (j) Steel ladder for machine room. (k) On-Off switch for fan and light.

(l) Over load warning indicator. (m) control switch near 3 feet height for Physically chalanged person. 43. Over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counterweight rubber padding, Motor of adequate capacity, electromagnetic brake with compression springs, car safety gears, buffer, electro mechanical door locks emergency key side supporting angles motor over load protection devices, final limit switch, main suspension ropes, counter weights, lifting joint joist for mounting the machineries. 44. Guarantee: Guarantee for the materials of workmanship of equipments complete should be offered by the lift firm for a period not less than one year. 45. Site testing in accordance with IS 14665 should be carried out by the firm at the time of Handing over the lift.Rate of one lift as per above specifications like Johnson / OTIS / Koney / equivalent etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 5A 3 Pin combined wall socket with 5A flush type switch in suitable module surface mounting Box (plastic) with module cover plate (plastic) on wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 15A flush type 2 way switch in suitable metal flush Box on wall and covered with modular white cover plate with earth connection.etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no.32A FP MCB as incoming concealed in wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no.32A DP MCB and 1 no.25A DP ELCB as incoming and outgoing concealed in wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 2 of 2.5 sq mm (36/0.3) PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable gauge MS conduit pipe on wall and ceiling with contineous earth wire connection of 2.5 sqmm copper wire with painting of suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 2 of 4.0 sq mm (56/0.3) PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable gauge MS conduit pipe on wall and ceiling with contineous earth wire connection of 4.0 sqmm copper wire with painting of suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply, Installation and testing of Epson 7000 /6400 Lumens laser proejctor, Resolution WUXGA, 1920 x 1200, 16:10 ; Full HD 1080p support, Light Source:Type: Laser Diode Life (Normal / Extended): 20,000 / 30,000 hours, Keystone Correction Manual vertical: ± 30 °, Manual horizontal ± 30 , Contrast Ratio:Over 2,500,000:1, Lens Shift Manual - Vertical ± 50 %, horizontal ± 20 %, dimensions 440 x 304 x 120 mm (Width x Depth x Height), weight 8.5 kg etc., complete complying with standard specification and as directed by the departmental officer.

Supply, Installation of 10'x8' tubuler motorized screen with remote control, Ratio 16:10 Type Elegant Tubular Motor, Fabric Matte White, Viewing Area W x H : 160" x 90"4071 x 2544 (mm) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Fixing of Customised Ceiling mounting Bracket for projector etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Laying of HDMI Sheilded AOC cable 20 Mtr.etc., complete complying with standard specification and as directed by the departmental officer.

Supply , Installation and testing of Yamaha make System Speaker type 2-way, Bass-reflex , Frequency range (-10dB) 51 Hz - 20 kHz , Coverage area H100ﾟ x V100ﾟ, Crossover 2.8 kHz: Power rating - 90w/180w , mounting bracket,Dimensions : 278 mm X430 mm X 239 mm Net weight 8.2 kg (etc., complete complying with standard specification and as directed by the departmental officer.

Supply and installation of Yamaha make Class Dpower amplifiers intelligent processing , Balanced output circuit (BTL) with high output power 300W per channel at 8Ω , Flexible onboard PEQ, crossover, filters, delay, and limiter functions , Sampling frequency rate -48kHz,A/D D/A Converters -AD/DA: 24-bit linear, 128 times over sampling ,Frequency response-±1.0dB (1W, 8Ω, 20Hz to 20kHz) ,S/N ratio-101dB (A-weighted, 8Ω, Gain setting = +14dBu) ,Maximum input voltage+24dBu,Processors - Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) ,Dimensions- 480mm x 88mm x 388mm Net weight - 7.4 kg etc., complete complying with standard specification and as directed by the departmental officer.

Supply and installation of yamaha make 10-Channel Mixing Console , Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) ,1 Stereo Bus ,1 AUX (incl. FX) ,“D-PRE” mic preamps with an inverted Darlington circuit ,1-Knob compressors ,High-grade effects: SPX with 24 programs ,24-bit / 192kHz 2in / 2out USB Audio functions , USB Camera Adapter , Includes Cubase AI DAW software download version ,PAD switch on mono inputs , +48V phantom power ,XLR balanced outputs ,Metal chassis Dimensions(W×H×D): 244 mm x 71 mm x 294 mm (9.6"x 2.8"x 11.6") ,Net Weight: 2.1 kg (4.63 lbs.) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and installation of Voltage Mainline Stabilizer suitable for above systems. Phase 1 Ph, Low & High Voltage Cut-off Protection, Capacity 15 ampere , Usage/Application. Industrial, Input Voltage 90 VAC – 300 VAC , Metal cabinet etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Installation of BELDEN make cables and Neutrik make connectors in lumpsum asper the requirement (CABLES AND CONNECTORS) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and installation Floor Mount AV Rack with tray and accessories with power Floor Standing Rack 17U 600X600mm, Static Loading 600 Kgs, 19” dimension and , Cable entry on Top & Bottom ,Front Toughened Glass Door & Back Steel Door with Lock and Keys, Turning angle of front and rear door over 180°, Powder coating Frame etc., complete complying with standard specification and as directed by the departmental officer.

Calibration and Programming Charges for Yamaha speakers , amplifier and audio mixer etc., complete complying with standard specification and as directed by the departmental officer.

Supply, Installation, Testing and commissioning of 15 KVA ONLINE UPS system 3 phase input and Single phase output and as per the detailed specification enclosed, Sealed Maintenance free batteries to support 15 KVA for 2 hrs backup complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adequate support to carry the load of the batteries. The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation. etc., complete complying with standard specification and as directed by the departmental officer.

Please Enable Macros to View BoQ information