REPAIR TO MISC B/R ITEM IN DOMESTIC AREA AND REPAIR TO INTERLOCKING TILE , CHEQUIRED TILE , PCC FLOORING AND CONNECTED ITEMS AT AF JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down & Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening complete all as specified and directed.

Powder coated Anodised aluminium frame and shutter for doors,windows, ventilators with one or more rebates including joining cleat for fixing, including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door (150mm) , 3 nos hinges for each door( 100mm) ,02 Nos tower bolt 200mm for each door anodised aluminum snap beading screws etc. complete all as specified and directed.

Anodised aluminium expanded metal mesh of any size/shape for window /ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperrture 1.40mm and fixed with tinned tackles or stainless steel wire staples fixed complete all as specified and directed.

Prelaminated particle board 12mm thick , exterior grade, prelaminated one side with decorative complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165 (Fe-290), drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooken and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing in position complete all as specified and directed. Note : Cost of welding butt hinges to the door frame deemed to included in quoted rate .

30 mm thick Flush shutters factory made solid core construction, with block board core, and ply wood face panels, commercial type on both side (ISI marked) fixed to chowkhat complete all as specified and directed.

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples fixed as in repair complete all as specified and directed

150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

100 mm long stainless steel hinges type B-12 complete all as specified and directed.

75 mm long stainless steel hinges type B-12 complete all as specified and directed.

Aluminium handle 150mm long , fabricated type anodized complete all as specified and directed.

PVC door( back side) stopper 75mm long fixed as in repair complete all as specified and directed.

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) solid block masonary exc 10cm in width and set in cement and sand mortar (1:4), and including demolition of existing masonary of any type complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

15mm thick plaster in cement mortar (1:6) on internal wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

5mm thick ceiling plaster in cement mortar (1:3) on uneven faces of concrete surfaces of ceiling soffits of chajjas/ drop & roof projectiom facia etc , including taking down old plaster complete all as specified and directed.

Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper over coat of primer over a coat of smooth finishing of wall care putty on new plastered surface complete all as specified and directed.

Preparing newly plastered or un plastered surfaces of wall and applying two coats of cement base paint a over coat of alkali primer on new plastered surface complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling, soffit of chajjas /drop and roof projection facia complete all as specified and directed.

Preparing old plastered or un plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of smoth finishing of wall care putty on oldplastered surface complete all as specified and directed.

Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm on vertical surfaces, over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non skid glazed ceramic tile coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed.

Vitrified ceramic tiles, 9mm to 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile tile exceeding 0.18 Sqm but not exc. 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in path/plinth protection laying in alternate ways finished even and fair without using extra cement including demolition of existing complete all as specified and as directed .

15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed as in repair complete all as specified and directed.

10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe and fixed as in repair complete all as specified and directed.

15mm bore brass chromium plated angle cock/stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

15mm bore, brass chromium plated pillar cock (foam flow) two ways screwed down for pipe fixed as in repair complete all as specified and directed.

15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union fixed as in repair complete all as specified and as directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with including dismantling and taking down old unserviceable complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling old unserviceable complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and fixed as in repair complete all as specified and directed.

Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin fixed as in repair complete all as specified and directed.

32/40mm bore spring type PVC waste pipe min 1.0 mtr long fixed to WHB & sink etc fixed as in repair complete all as specified and directed.

Stainless steel kitchen plate rack 1.00mm thick sheet of size not less than 900x600 mm with three rack fixed with stainless steel screw on wall properly fixed as in repair complete all as specified & directed

Tubular towel rail, stainless steel, 20mm dia, 60cm long fixed with & incl chromiumplated brass screws and wooden / plastic cleat fixed as in repair complete all as specified and directed.

125mm dia brass chromium plated shower rose with CP arms swivel joint, , including fixing to steel pipe or union fixed as in repair complete all as specified and directed.

150 mm square PTMT grating with openable flap (Min weight 100 gms).fixed in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed as in repair complete all as specified and directed.

Hasp and staple 125 mm size, ISI marked , safety type of aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed

Mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Stainless steel 40mm dia decorative knob for kitchen cup board fixed as in repair complete all as specified and directed.

Brass magnet catcher suitable for CB/cabinet shutter fixed as in repair complete all as specified and directed.

150mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door, fixed as in repair complete all as specified and directed.

Mild steel helical door spring including roller and roller plate fixed as in repair complete all as specified and as directed .

18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of existing stone slab bedding complete all as specified and as directed.

5.0 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each panencluding hacking out old broken glasses any thickness size complete all as specified and directed.

PVC (SWR) floor trap of dia 75x125mm , plain with grating incl jointing with solvent cement fixed as in repair complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick laid as in floors in squares or rectangular pattern laid over 20mm thick cement screed bed in cement and mortar (1:6) set and jointed in neat cement slurry and pointed coloured cement to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut Kota stone slab 12- 15mm thick, as in skirting, riser of step, dado and pillar etc. laid over and including rendering of 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

4.0mm thick plain sheet glass ordinary quality pin head type and glazing with oil putty or aluminium beads and rubber in squares not exceeding 0.50m sqm in each pane fixed new panes fixed as ventilators including hacking out old broken glass and fixing new ones, complete all as specified and directed.

4.0mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares not exceeding 0.50m sqm in each pane fixed new panes fixed as ventilators including hacking out old broken glass and fixing new ones, complete all as specified and directed.

Hybrid Board, Eco Board classic 4mm thickness, 595mmX595mm, as in false ceiling including powder coated GI grid system and ajustable suspender and fastening arrangement including dismantling of existing ceiling complete all as specified and directed.

140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door, fixed as in repair complete all as specified and directed.

15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe fixed as in repair complete all as specified and as directed.

15mm bore brass chromium plated wash hand basin mixer long swan neck for mixing hot & cold water screwed down for iron pipe and fixed as in repair complete all as specified and as directed.

Jaisalmer/Jodhpur stone slabs 15 to 20mm thick dressed true and square/rectanguliar tiles of approved sizes as in wall/column claddings/linings jointed and recess pointed in coloured cement mortor 1:6 with and including 15mm thick backing in CM (1:4) fixing with fastener etc complete all as specified and directed.

Mortice lock vertical type , size 100 mm bright finished brass with four levers and pair of anodized (anodic coating 10 micron) as per IS-1868) aluminium lever handles with necessary screws etc fixed as in repair complete all as specified and as directed

Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, with & including replacement of floor tiles if any broken during repair work and making good surfaces matching to the existing surfaces complete all as specified and directed.

RCC (1:2:4) nominal mix type B-0 (using 12.5mm graded stone aggregate) in chajjas,sprial staicase including landing , lintel, cill, bed block coping ,bed plate, bond stone etc including necessary form work complete all as specified and as directed .

PVC Cover heavy duty for PVC water storage tank of capacity 500/1000 litres ISI marked fixed as in repair complete all as specified and directed.

Mild steel TMT bars upto 6 to8mm mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.and directed and directed

Preparing newly plastered or un plastered surfaces of wall and applying two coats of plastic emulision paint paint over one coat of primer over a coat of smoth finishing of wall care putty on new plastered surface complete all as specified and directed.

18 mm thick Rajshree Celuka ply of grade 1 quality of one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters complete all as specified and directed.

PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. etc. including taking down existing demolition concrete complete all as specified and directed.

60mm thick,interlocking paver block M-35 grade machine pressed factory made rubber moulded precast concrete any shape and size conforming to IS-15658-2006 of with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope and dismantling of existing stone slab tile with cement mortar bedding complete all as specified and directed.

80mm thick,interlocking paver block M-35 grade machine pressed factory made rubber moulded precast concrete any shape and size conforming to IS-15658-2006 of with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope and dismantling of existing stone slab tilewith cement mortar bedding complete all as specified and directed.

Factory made coloured Rubber moulding chequered cement concrete tiles, 20cmx20cmx25mm thick,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment,over & including 15 mm thick screed bed in cement & sand morter 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Factory made coloured Rubber moulding chequered cement concrete tiles, 30cmx30cmx25mm thick,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment,over & including 15 mm thick screed bed in cement & sand morter 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

10mm thick, size 300x300mm coloured endura parking tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as path complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:4) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

10mm thick plaster in cement mortar (1:4) on block masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete. including taking down old plaster complete all as specified and directed.

Precast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) set in cement mortar 1:6 as in cover slab including placing of necessary form form work in position including taking down existing complete all as specified and directed.

Mild steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in kerbs stone and the likes including weathering, slightly rounded or chamfered angles and throating including jointed ,pointed in cement mortar 1:4 embeding in the ground complete all as specified and directed.

Preparation of newly surface of road side kerb stone and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Preparation of old surface of road side kerb stone and applying one coats of synthetic enamel paint complete all as specified and directed.

MARUDHARA CONSTRUCTION COMPANY

M/s Sati Jasnath Enterprises

Leelashah Enterprises

BHAGWATI CONSTRUCTION