REPAIRS TO FOOTPATH, HARD STANDING, FLOOR AND WALL TILES AND PLASTER WORK OF AREA IV UNDER AGE B/R (WEST) AT COLABA, MUMBAI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises outside MoD land all as specified and directed.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.36 sqm but not exec 1 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

All as per item No 2 above but in in vertical surfaces such as skirtings and dados

M&L light shade vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

M&L light shade vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

S&F gold and silver ceramic pencil tiles, 8 - 10 mm thick and having length 600 mm polished, in vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L non skid ceramic tiles 10 mm thick (square/rectangular) light shade vitrified coloured ceramic tiles, 10 mm thick (square/rectangular), polished, area of each tile not exc 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

M&L non skid ceramic tiles tiles 10 mm thick (square/rectangular) light shade, vitrified coloured ceramic tiles 10 mm thick (square/rectangular), polished, area of each tile not exc 0.36 sqm n vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

M&L virified ceramic tiles, light shade, 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

M&L HI-Gloss digital ceramic tiles in vertical surface of size 600mm x 1200mm and 8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufacture instructions. Make : H R Johnson/ Orient / Kajaria.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L glazed tiles digital coloured ceramic of size 300x450x7/300x600x7 mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles all as specified and directed. Make : H R Johnson/ Orient / Kajaria.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L machine cut, polished cudappah stone work 18- 20 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:4) all as specified and directed.

M&L for granite (of any approved shades 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring, cill and all other similar works all as specified and directed.

M&L for machine cut kota stone slab frooring 18-20 thick laid over 15 mm thick screeed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and as directed.

S&F in repairs 4 mm thick PVC tiles/sheets, laminated of any colour/pattern laid with approved rubber based adhesive in floors all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

M&L for Ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces including taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finished using sponge, including use of scaffolding and removing debris outside MD land all as specified and directed. Name of Manufacturer: M/s Ultratech Cement Ltd/M/s ACC acopalst/CK Birla Aerocon.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces on cement mortor (1:3) including taking down and removing debris outside MD land all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and use of scaffolding where required at any height of buildings for external painting all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces, rubbing with sand paper, preparatory to distempering and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed. Make : Asian - Tractor or Berger- Bison

M&L for preparation of newly plastered surfaces of celling and applying three coats of white wash all as specified and directed.

M&L for preparation of old decorated surfaces of walls, including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply two coats of distemper oil emulsion on walls through an authorised applicator all as apecified and directed Make : Asian - Tractor or Berger- Bison

M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over one coat of primer including necessary scafolding at any height of bldg for external painting all as specifed and directed.

M&L in repairs rubber moulded glossy finish 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment, laid over sand cushning 25 mm thick compacted bed of crushed stone sand, filling the joints with fine sand including compaction of paver blocks using surface vibrator all as specifed and directed.

M&L in repairs for chequred finish endura industrial tiles 10-12 mm thick (square or rectangular), area of each tiles exc 0.09 Sqm but not exc 0.18 Sqm, in floor treads and risers of steps fixed with grey cement and pigment laid over and including 20 mm thick screed bed in CM (1:4) all as per manufacturer instruction and design all as specifed and directed.

M&L in repairs for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15 mm thick (Square / Rectangular) polished area of each tile exc 0.09 Sqm but not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles including 20 mm thick backing coat of cement plaster in CM (1:4) for fixing tiles all as specifed and directed.

S&F in repairs of framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

S&F in repairs of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to FE 290 Gde -E-165 all as specified and directed.

S&F in repairs mild steel 0.80 mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L in repairs coloured glazed digital ceramic wall tiles 300x450x7 mm / 300 x 600 x 7mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and rendering 10 mm thick in CM (1:4) on fair faces of brick work all as specified and directed.

M&L in repairs for SS 304 grade stainless steel tubing (square/round/rectangular) of suitable gauge as in SS guard bars, railings, SS frame works including all fixing arrangments, including taking down of old SS guard railing all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work all as specifed and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for including removing debris from MoD land all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection and all other similar works, finishing the cement concrete surface even and smooth without using extra cement all as specified and directed.

M&L for forming construction joints 30mm deep X 10mm wide with sealing compound grade A all as specifed and directed.

M&L for MIXED CEMENT CONCRETE DELIVERED ON BUNKER M20 type 1, 1:11/2:3 (20 mm graded aggregate) as in flooring and all other similar works all as specified and directed.

M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surfaces all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L for cement concrete type D-2, 1:4:8 (40 mm graded aggregate as in foundations, filling and mass concrete all as specifed and directed.

M&L for providing precast cement concrete type B1, 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 in road side kerb stones of any shape & size and all other similar works all as specified and directed.

M&L for preperation of old / new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and patteren all as specified and directed .

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified & directed.

All as per item No 48 above but except bricks. (Serviceable bricks obtained from Item No 47 above to be reused.)

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and like all as specified and direcetd.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and directed.

M&L for RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded crushed stone aggregate) as in precast concrete cover slab fixed in position , tie between two brick walls and all other similar works set in CM 1:4 including necessary form work all as specified and directed.

M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipsall as specified and directed.

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 CM .

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of open drains completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth, etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 CM .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth, etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth, etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

S&F in repairs 300 mm dia reinforced concrete pipes, class NP2 laid and jointed with collar all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified & directed.

S&F in repairs 150 mm dia reinforced concrete pipes, class NP2 laid and jointed with collar all as specified and directed.

M&L for providing cement concrete type C2 (1:3:6) 40 mm graded aggregate as in surface channels and drains, finished even and smooth all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends all as specified and directed.

S&F in repairs LED powered solar road studs of size not less than 110 mm X 110 mm X 25 mm ( with shank height not less than 50mm) made of weather resistance aluminium alloy and poly carbonate material electronically welded micro- prismatic lens with abrasion resistant coating. Protection shall conform to IP65 in accordance with IS: 12063-1987 Category 2 for protection against water ingress. Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt. One Ni-Mh or NI-cd Rechargeable Battery (1.2V / 1600 MA). The cats eye shall support a load of approx 10 TON weight. The slope of retro- reflective surface shall be 35 ± 5 degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The stud shall provide a viewing distance of not less than 800m. The studs shall be flushed on to the road surface and fixed using the adhesive conforming to IS, as per procedure recommended by the manufacturer and as per direction of Engineer-in-charge.

M&L for precast cement concrete type C-1 (1:3:6), block masonary with solid blocks of size 390x190x190 mm and set in CM (1:4) all as specified and directed.

ASHOK CONSTRUCTION

Frends Enterprises

SAHU AND SAHU CO.

HINDUSTAN BUILDERS

Unitech Enterprises

SHREE JAGDISH FURNITURE CO.

M/s Qureshi Construction Co

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

M/s Qureshi Construction Co

SHREE JAGDISH FURNITURE CO.