ITEM NO4 NIT NO.2

Engine: 2- Stroke - Single Cylinder Air cooled. ENGINE DISPLACEMENT: Should be between 20-25 CCPower Output: Should be minimunm 1 HPFUEL TANK CAPACITY: Minimum 400 ml WEIGHT: Should not be more than 6.0 KG CLUTCH: Clutch Linning should be metal only. HANDLE: Must have Rotating multi-function handleANTI VIBRATION SYSTEM: Must have spring loaded technology for Anti Vibration SystemDesign: Should have Double sided blade with tooth spacing minimum 35mmBar Length: Minimum 600 mmBlade: Should have Chrome Plated -Anti Corrsion. Stroke Rate ( l/min): Minimum 3000 Vibration Level m/s2 at Right Handle: Should not be more than 3.5 m/s2. Sound pressure level (dB..(A)): Should not be more than 95Certification: Should have TUV with EN ISO 10517:2009

Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HPMax Output shaft speed at cutting attachment: Should be minimum 9000 RPMCARBURETOR: Diaphragm with compensator technology.Fuel Tank Capacity: Minimum 600 ml.WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 KgCLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only.MULTI UNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle.BRUSHCUTTER HARNESS: Should be double shoulder harness only.ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system.Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2Sound Pressure Level Db(A): Should not be more than 105 dB(A)Drive shaft design: Must have drive shaft ends square design type only.Certification : Must have valid EN Certificaton

Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYDisplacement: 45.4CCPOWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPMCarburetor: Diaphragm type & compensator technology.Fuel tank capacity: Should be minimum 450 ml.Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY.Guide Bar Design: Should be Rollomatic type.Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only.Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.chain Lubrication System: Fully automatic ,speed controlled rotary oil pumpChain oil tank apacity: Should be minimum 200 ml.Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.Guaranteed Sound power level: Should not be more than115 Db(A)Maximum chain velocity to ISO 11681: Should be minimum 28 m/sCertification: Product should have valid DPLF certificate with test standard EN ISO 11681.

Supply of Telescopic Pole Pruner:- Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment : 10 positions king Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max

Handle Length: 13” to 17” (minimum to maximum). Total Weight: 1.5 to 2.5 pounds (including handle). Head Length: 5” to 7” (blade to butt). Head Height: 1.5” to 4” (parallel to handle). Construction: Single-piece or one-piece solid steel design.

conformity to indian standard , IS:3094-1982, Type of bill hook -Single edge Material of blade- Alloy S\steel conforming to IS 4367 latest Material of tang- Mild Steel (as per IS:226-1975) Material of Handle- Timber (as per IS:620-1975) Material of ferrule- Mile steem sheet (as per:1079-1973) Thickness of ferrule -3mm hardness of blade(as per 1500-1968) HB or HBW-400 Size of bill-hook for single and double edge type-275mm Thickness of blade-5mm Length of Handle including ferrule-150mm widht of blade-135(single edge)

Supply of bamboo Broom With Wooden Handle 1.2 Mtr. Height Complete with iron ring of good quality with bamboo stick.

Supply of Trimmer line (Nylon brush cutter wire) of good quality