REPAIR MAINTENANCE OF LT PANELS ACBS MCCBS AND MISC WORKS UNDER AGE EM AT GE FAIZABAD

Amount

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soilcomplete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for sand cushioning to underground cable with clean dry river sand complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only shall be measured & Paid.

Supply & Laying of sub class 'B'bricks locally available best quality laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable complete all as specified and directed by Engr-in-Charge.

Hiring of cable fault detector, to detect exact position of fault for XLPE /PVC LT/HT cable, 1100/11000 Volts grade heavy duty aluminium conductor of any size including to and fro transporting charges etc. complete all as specified and directed by Engr-in-Charge.

S & F Straight through cable joint kit for LT UG cable of 16 Sqmm 4 Core complete all as specified and directed by Engr-in-Charge.

All as per item no. 7 but of 25 to 50 Sqmm 3.5 Core

All as per item no. 7 but of 70 to 150 Sqmm 3.5 Core

All as per item no. 7 but of 185 to 240 Sqmm 3.5 Core

All as per item no. 7 but of 300 to 400 Sqmm 3.5 Core

Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm bore for passing cables complete all as specified and directed by Engr-in-Charge. Note : GI pipe shall be measured and paid separately.

Supply & laying of GI Pipe 50mm boresteel tubing, galvanized light grade bores, for passing LT/HT cable under road or PCC floor or fixed on wall/on pole or drain etc or whenever protection is required including necessary clamps and nut bolts with GI fitting complete all as directed and specified .

All as per item no. 13 but of GI Pipe 80mm bore.

Supplying, laying, commissioning & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of the under mentioned type and size of 10 Sqmm 2 core complete all as specified and directed by Engr-in-Charge.

All as per item no. 15 but of 16 Sqmm 4 Core

All as per item no. 15 but of 25 Sqmm 3. 5 Core

All as per item no. 15 but of 50 Sqmm 3. 5 Core

All as per item no. 15 but of 70 Sqmm 3. 5 Core

All as per item no. 15 but of 95 Sqmm 3. 5 Core

All as per item no. 15 but of 120 Sqmm 3. 5 Core

Supply and fixing in repair aluminium sector lugs short barrel of following sizes of size 25 Sqmm , complete all as specified.

All as per item no. 22 but of 35 Sqmm

All as per item no. 22 but of 50 Sqmm

All as per item no. 22 but of 70 Sqmm

All as per item no. 22 but of 95 Sqmm

All as per item no. 22 but of 120 Sqmm

All as per item no. 22 but of 150 Sqmm

Disconnecting electrically incomming and outgoing LT UG cable of LT panel of any size and replace burn/unsv suitable size of aluminium bus bar, Welding work for hinches and doors, fixing the locking arrangement including scraping outdoor/indoor side of LT Panel and one coat of redoxide, two coat of synthetic enamelled seimens gray spray of outdoor/Indoor side and reconnecting LT UG cable with fixing cable gland of all suitable size cable and aluminium lugs by using crimping tool, nut, bolt washer etc and all necesary work required for smooth functioning of LT panel all specified and directed by Engr-in-Charge.

M & L for installing, testing and commissioning of factry made bus bar chanber comprising of 4 Nos aluminium bus bar of 200 Amp rating supported on insulator and enclosed with sheet steel enclosure out door type made out of 3.15 mm thick CRCA sheet, with top edge tappered, dust and vermin proof , having locking arrangement at front and opening arrangement from front & rear both including fixing arrangement on pole/gorunting in floor, with colour coded FRP with compression cable glands for entry & exit of cables, powder coated all specified and directed by Engr-in-Charge.

M&L for Indicator lamp LED type (R,Y,B) complete with bakelite fuse complete all as specified and directed by Engr-in-Charge. Make L&T/KEYCEE.

Labour for cutting/ trimming of tree branches up to 80mm thickness along the alignment of LT /HT over head electric line which are going/ touching or falling or ACSR conductor/ poles or near by sub stns etc at any height from GL and making ta leastlearance 1.5m form conductor and removing to a distance up to 100 mtr where directed by Engineer-In-Charge. Note:- (i) Trimming of the branches on one sides of the conductor. (ii) actual length of cutting will be measured. (iii) The distance as motioned above will be maintained during contract current period & same location subject to at least 6 months period between two trimming/leaping. (i) Measurement will be taken including all conductor as one only.

Earthing complete with galvanised steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the earth plate not less than 1.5 meters deep below normal ground level, connected with and including galvanised iron strip of size 32 x6 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No 3 of SSR Part-I and testing on completion complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of MCCB, 4 pole, 100 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 25 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T /Schneider/C&S).

Supply & fix in replacement of MCCB, 4 pole, 160 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 25 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T /Schneider/C&S).

Supply & fix in replacement of MCCB, 4 pole, 200 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 36 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T /Schneider/C&S).

Supply & fix in replacement of MCCB, 4 pole, 250 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 36 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T /Schneider/C&S).

Supply & fix in replacement of MCCB, 4 pole, 400 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 36 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T /Schneider/C&S).

Supply & fix in replacement of ACB, 4 pole, 1000 Amp, 415V 50Hz with Microprocessor based AHA-10S-CS, EDO, C - power Draw -out ACB, including under voltage, rating breaking capacity 65 kA,with connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- C&S Cat No. AHA10N4PMP3.1(S) or equivalent toLegrand/L&T.

Servicing/Repair the ACB of various Capacity of outdoor/indoor type, tripping circuit and resetting trip values and the nuemerical relays and checking tripping machnism fully by engaging well experianced technicians as per manufacturer recommendation and all as directed by the Engineer-in-Charge.

Shifting of LT Panel after Disconnecting all the electric connections from and earthing terminals from the LT Panel including fixing to another bay with new foundation and necessary earthwork all as directed by Engr-in-Charge.

Material and Labour for LED multi-functional meter flush mounting type with RS485 port accuracy class 0.5 of size 96 x 96 mm Cat No: WL442021OOOO of make: L&T or equivalent in other approved make including fixing in existing panel boards in place of Voltmeter/ Ammeter and connecting with existing CTs with reqd size of PVC insulated and unsheathed multi-stranded copper conductor for indicating/ recording the following parameters: - (a) Voltage, (b) Ampere, (c) Frequency, (d) Power Factor, (e) Load in kW, (f) Energy in kVA, (g) Reactive Power in kVAR, (h) Energy in kWh, (j) Max Demand in kVA and kW [Note: - (i) The existing serviceable Voltmeters/ Ammeters to be deposited to MES store yard as and when retrieved (ii) The cost of making good of existing panel board if damaged during execution deemed to be included in quoted rate]

Providing services by deploying adequate number of manpower for attending day to day omplaints/ breakdowns of NO lights/short curcuits including general maintenance and cleaning and dusting of installation (SS No.2 to 26, 11 kV) and surrounding area at DRC Trg area,17 Jak Li unit area, 5 Jak Rif Unit area, 141 Bde, 11 Jat Regt , MH Faizabad, all MD accns( Offrs , JCOs and ORs), All Unit Offrs mess, EME wksp, Supply depot, Nursing Offr mess of all external electric installations from feeder piller box to building including LT overhead lines & LT under ground cable jointing,distribution panel board, security/street lights, repairs/replacement of defective componenets ,fittings & fixtures and depositing the defective/unserviceable dismantled materials in store yard of AGE E/M Faizabad complete all as directed by Enginner in Charge comprising of the following:- (a) Electrician (skilled) for one shift per day (each shift of 08 hours) - 01 No. (b) Helper (Un-skilled) for one shift per day (each shift of 08 hours). - 02 Nos.Note :- (i) The Electrician should have good working knowledge of HT 11 KV and LT equipments mentioned as above and qualification as mentioned in the tender documents here-in-after (iii) The Electrician should wear proper uniform on duty including electric shockproof shoes and the cost there of deemed to be included in the quoted rate (iv) Penalty as per rates mentioned in the tender documents here-in-after will be deducted for absent in duty , not wearing of proper uniform (v) The timing of shifts will be 0800 to 1600 Hrs and reliever shall be arranged by the contractor and the cost thereof shall be deemed to be included in the quoted rate (vi) The contractor shall submit proof of payment through bank account, deposition of EPF and IESI/ insurance before claimimg any payment for outsourced staffs (vii) Contractor should supply daily log sheets to the operator and the log sheets duly filled in should be handed over on next day to the JE E/M in charge.

Taking out old US/damaged LT Panel at site and making good disturbed surfaces etc complete all as specified and directed.

Supplying and laying synthetic Rubber insulated mats 3 mm thick for voltage upto 33 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.

Supplying and fixing Electrical sock treatment instruction chart (in Hindi and english) with tear proof,water proof, dust proof with plastic laminated on both side and framed with plastic/ wooden frame with suitable hanging arrangement of min sizes 50x70 cm complete all as specified and directed.

Supply and hanging Flex board of min size 8' x 8' x1' (back light) (including 6 pass digital printing on back light star flex with 3/4” square iron frame (heavy gauge) with aluminum beeding with side panel covered with painted G.I. sheet with 4 Nos of philips/Crompton LED tube lights 20 watt complete all as specified and directed. Note : hard copy of colour distribution diagramm to be given to the contractor at the time of flex board ordering.

Supply and hanging Flex board of min size 5' x 5 ' x1' (back light) (including 6 pass digital printing on back light star flex with 3/4” square iron frame (heavy gauge) with aluminum beeding with side panel covered with painted G.I. sheet with 3 Nos of philips/Crompton Make LED tube lights 20 Watt complete all as specified and directed. Note : Hard copy of single line distribution diagramm of HT supply at MRS to Sub stations to be given to the contractor at the time of flex board ordering.

M/s A.K Construction

MISRA TRADING CORPORATION

Aawadh associates

His And Her Enterprises

m/s allied enterprises

Ajanta Motor Store